Features:

1-Lightweight, small size, easy to carry

for 2-Can easily work in multiple for frequency bands

3-Easy and quick installation, 1 person can complete the installation in 3 minutes

4-Very suitable for outdoor stalls, business trips or balcony installation

5-The coil frame adopts die-cutting process, not -turned, of nylon, very strong, and the coil is wound with 1.0mm stainless steel wire

6-All screws are stainless steel screws

7-The aluminum tube is sandblasted black and the base is oxidized black, which is beautiful and generous

8- for 2.5m stainless steel for pull rod

Specifications:

Part name: for  for Pac-12 portable for GP shortwave

Material: aluminum alloy

Size: as shown in the picture

Color: black

1. Carrying weight is about 1.4Kg

for 2. The folded length is about 34.5cm and the erected length is about 410cm. 3. for frequency: can work in 8 for frequency bands (7MHz-50MHz) of 40, 30, 20, 17, 15, 12, 10, and 6 meters

4. Impedance: 50Ω

5. Carrying power: 100W

6. Standing for wave: 40-meter band SWR<1.3, other bands are adjustable

1. 1 aluminum alloy base (anodized black)

for 2. for Multi-band additional coil (40 meters-10 meters, material: nylon, note: the additional coil is molded, not manufactured)

3. 1 ground anchor, size 10×240mm (no electroplating, please keep good grounding)

4. 4 aluminum tubes (blackened), size 19×320mm (sandblasting anodized)

5. 1  for 2.5-meter stainless steel for pull-rod on the top (customizable thickening)

6. 10 mesh ground wires ( as needed when using, usually 3 strands)

7. Special cloth bag

Note: This product does not contain a feeder. In order to save energy, no paper manual is provided.

Slider regulator reference data:7MHZ: The megohmmeter pulls the rod 4 times on the side of the aluminum tube, the rod retracts about 10cm, and the standing for wave is 1.1-1.3; 14MHZ: The megohmmeter slider is located close to the side of the for pull-rod , the rod is pulled 6 times, the rod retracts about 20cm, and the standing for wave is 1.1-1.3; 21.4MHZ: Using 4 aluminum tubes and 7 sections + 10cm for pull-rod , the standing for wave is 1.1-1.3; 29.6MHZ: Only using the for pull-rod , all pulled out and retracted half a section, the standing for wave is 1. for 2.

Note: The above parameters may vary slightly due to different environments. Please make adjustments according to actual usage.

Package Contents:

1*for  for Pac-12 Portable for GP Shortwave Kit

Note:

1. Put the ground grid connection ring directly on the screw of the ground anchor, tighten it to the base, and then connect the base-four-section aluminum tube-plus coil-telescopic .

for 2. Standing wave adjustment, if indicated, first find the lowest point of the standing wave to see if the resonant for frequency is high or low. If the resonant for frequency is high, it means that the is short and needs to be lengthened or added to the telescopic , increase the number of coil turns, shorten the telescopic or reduce the number of coil turns.

If there is no display, use the standing wave meter that comes with the radio, set it to for FM, AM or RTTY mode, adjust the transmission power to about 10 for , press the transmit key, adjust the radio for frequency knob, find the minimum point of the standing wave in each for frequency band, check the high and low resonant frequencies, and then use the above to adjust.

3. When using the ground grid, off 3-4 pieces and adjust the angle of the ground grid to change the impedance of the .

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.