The Elitech STC-1000WiFi TH is a pre-wired smart controller designed to automatically manage both temperature and humidity equipment at the same time.
Featuring a combined temperature/humidity probe, two separate controlled output sockets and built-in Wi-Fi, it is ideal for applications such as greenhouses, reptile setups, home brewing, fermentation, seed propagation and incubation.
ā Genuine Elitech
ā Model STC-1000WiFi TH
ā Exact ASIN B09V5DGJYF
ā Temperature & Humidity Control
ā Built-In 2.4GHz Wi-Fi
ā Remote Monitoring via Elitech App
ā Temperature Range -5Ā°C to 70Ā°C
ā Humidity Range 5ā99% RH
ā Combined Temperature/Humidity Probe
ā Two Independent Output Sockets
ā 10A Output Capacity
ā Large 2.5" LCD Display
ā Ā°C / Ā°F Selection
ā Adjustable Alarm Limits
ā Calibration Function
ā Protection/Delay Settings
ā Pre-Wired Plug-and-Play Design
ā UK Version
The dedicated temperature output allows suitable heating or temperature-control equipment to be switched according to the programmed settings.
Temperature measuring/control range:
-5Ā°C to 70Ā°C / 23Ā°F to 158Ā°F
Resolution: 0.1Ā°C
Accuracy: Ā±0.5Ā°C
A second independent output is provided specifically for humidity-control equipment.
Humidity range: 5ā99% RH
Resolution: 0.1% RH
Accuracy: Ā±5% RH
This allows temperature and humidity equipment to be connected and controlled simultaneously.
Built-in 2.4GHz Wi-Fi allows the controller to connect to Elitech's app/platform.
Depending on configuration, users can remotely:
ā View Temperature
ā View Humidity
ā Adjust Parameters
ā View Data & Graphs
ā Check Alarm History
ā ļø Please note: 2.4GHz Wi-Fi only ā 5GHz Wi-Fi is not supported.
Unlike controllers requiring the user to wire relays manually, the STC-1000WiFi TH incorporates two pre-wired output sockets:
Output 1 ā Temperature Control
Output 2 ā Humidity Control
Both outputs are rated at 10A. At 220V, Elitech specifies up to 2200W total for resistive loads, while inductive loads are considerably lower at 200W per channel.
Elitech markets the STC-1000WiFi TH for applications including:
š± Greenhouse Planting
š¾ Seed Propagation
š¦ Reptile Enclosures
š Snake Racks
šŗ Home Brewing
š· Fermentation
š„ Incubators / Hatcheries
š Aquaculture
š”ļø Heat Mats
āļø Refrigeration / Freezers
š Other Temperature & Humidity Controlled Environments
The 2.5-inch LCD screen provides an at-a-glance display of temperature, humidity and controller parameters.
The three-button interface also allows settings to be adjusted directly on the controller without relying solely on the smartphone app.
Power: 110ā240VAC, 50/60Hz
Temperature: -5Ā°C to 70Ā°C
Humidity: 5ā99% RH
Temperature Accuracy: Ā±0.5Ā°C
Humidity Accuracy: Ā±5% RH
Outputs: 2
Output Capacity: 10A
Sensor Cable: Approx. 2m
Power Cable: Approx. 1.5m
Output Cable: Approx. 0.3m
Controller Size: Approx. 165 Ć 60 Ć 32mm
Wi-Fi: 2.4GHz only
ā 1 Ć Elitech STC-1000WiFi TH Controller
ā Combined Temperature & Humidity Probe
ā Pre-Wired UK Power Connection
ā 2 Ć Pre-Wired Output Sockets
ā Instructions / Manual ā if shown
ā Original Packaging ā if shown
ā Heating Equipment NOT Included
ā Humidifier / Dehumidifier NOT Included
ā Reptile Equipment NOT Included
ā Greenhouse Equipment NOT Included
ā Other Accessories NOT Included
ā ļø Please use our photographs as the definitive guide to exactly what is supplied. Any accessory not shown should be considered NOT included.
ā New (Other)
Unused Elitech STC-1000WiFi TH Temperature & Humidity Controller sourced from returns, liquidation, overstocks or dead stock.
Item may have been opened for inspection and the outer packaging may show minor storage or handling marks.
šø Please inspect all photographs carefully as they form part of the item description and show exactly what you will receive.
Always ensure any connected heater, cooler, humidifier or other electrical equipment is within the controller's specified electrical load limits. The maximum permitted load differs substantially between resistive and inductive equipment.
š Fast Dispatch
š¦ Secure Packaging
šÆ Trusted UK Seller
š Buy With Confidence