17 19 22 24mm Motorcycle Front Rear Wheel Axle Hex Spindle Allen Key Socket Tool

📦 Product Introduction

This integrated double-layer hexagonal socket integrates four commonly used specifications: 17mm, 19mm, 22mm, and 24mm. It is specifically designed for disassembling and repairing screws on the front and rear wheel spindles of motorcycles, replacing tires, maintaining bearings, and correcting wheelbase. It is an essential tool for daily maintenance in repair shops and personal motorcycle enthusiasts.

✨ Product Highlights

🔹 Four specifications integrated design, one replacing four sleeves

Collecting the four most commonly used wheel axle sizes for motorcycles on the market, covering most scooters, scooters, off-road vehicles, and retro motorcycle wheel spindles, there is no need to carry multiple loose sleeves, making it easier to store with the vehicle.

🔹 High strength steel is blackened and quenched, with high torque that is not easily cracked

The overall structure is made of solid alloy steel, which has been quenched, hardened, and treated with blackening and rust prevention. When tightening the fastening screws, it is resistant to compression and torsion, and there will be no chipping, cracking, or slipping when disassembled with great force. It can also be smoothly disassembled in the face of rusted and stuck axles.

🔹 Internal and external hexagonal bidirectional structure, compatible with various driving tools

The two ends are respectively an inner hexagonal socket hole and an outer hexagonal drive position, which can be used with ratchet wrenches, torque wrenches, or directly clamped with an open-end wrench to manually apply force to the outer hexagonal position, providing greater flexibility for working in narrow spaces.

🔹 Thickened barrel with limit convex ring, precise alignment without slipping

The cylinder wall is thick and durable, and the middle limit washer can accurately fit the screw end face. When fitting the wheel axle bolt, it fits tightly and evenly, avoiding the sleeve from slipping and wearing the nut edges during the twisting process, and protecting the original vehicle fasteners.

🔹 Compact solid structure, portable, durable and easy to store

The overall short solid design is compact in size and can be directly put into a motorcycle repair kit. It can be carried with you for emergency repairs and tire replacement on the roadside. It is easy to clean oil stains and is not easy to rust after long-term use.

🛠️ Instructions for Use

According to the size of the wheel axle nut, select the corresponding specification to fit on the outside of the bolt;

Use a wrench to hold the outer hexagonal position of the socket, and turn the disassembly wheel axle in the direction of the thread;

After disassembling the wheels for inspection, tire replacement, and maintenance, tighten the spindle nut and control the appropriate torque;

Wipe off oil stains after use and store in a dry environment.

⚠️ Warm usage tips

It is recommended to spray rust remover on the corroded wheel axle first, and it is forbidden to forcefully strike the sleeve;

Locking the wheel axle according to the vehicle's standard torque operation, over tightening can easily damage the bearings and wheel hub structure;

Avoid long-term exposure to humid environments, regularly wipe and maintain tools to extend their lifespan.