I. Basic Information

Model: ERIKC 095000-5650

OE Number: 16600-EB300, 16600-EB30E, 16600-EB30B, 095000-5651

Brand: ERIKC

Type: High-Pressure Common Rail Injector (Assembly, DCRI105650)

Compatible System: Common Rail System (up to 1600 bar)

Warranty: 12 Months (Brand New with Test Report)

Weight/Dimensions: Approx. 0.62kg/piece, Standard Interface

Injector Model: DLLA144P828 (6-hole, 144° cone angle)

Control Valve: F00VC01045 (Original Equipment Manufacturer)

II. Compatible Engines and Vehicle Models

Engine: Nissan YD25DDTi/YD25 dCi (2.5L 4-cylinder, Euro 3/Euro 4) Typical Applications: Nissan Navara D40 Pickup Truck (2005–2015 model, 2.5L dCi 171HP)

Nissan Pathfinder R51 SUV (2005–2012 model, 2.5L dCi 171HP)

Nissan Cabstar F24 (2006–2013 model, 2.5L dCi)

III. Interchangeable Models (Fully Interchangeable)

095000-5651 (Same specification upgraded version, fully interchangeable)

16600-EB300, 16600-EB30E (OEM OE number)

IV. Core Parameters and Performance:

Operating Pressure: 1400–1600 bar (Common Rail High Pressure)

Injection Accuracy: Full operating condition error **≤±3%**

Response Time: Solenoid valve **≤0.4ms**, supports pre-injection + Main Injection

Fuel Return Quantity Standard: 1.0–1.6 ml/min (250 bar)

Material: Needle valve assembly HRC 60–62 high-speed steel, resistant to high-pressure wear

Sealing: Fluororubber seals, temperature resistant **-40℃～180℃**, resistant to diesel corrosion

Correction Code: With QR correction code, no need to rewrite ECU, direct installation

V. Applicable Faults (Direct Replacement Repair)

✅ Difficulty starting, idling vibration, weak acceleration, insufficient power

✅ Black smoke, high fuel consumption, frequent DPF regeneration, excessive emissions

✅ Large injector return quantity, high-pressure leakage, nozzle dripping, poor atomization

✅ Fault Codes: P0201–P0204, P0089, P1201, P2002

VI. ERIKC Quality Advantages

Original Factory Grade Precision Manufacturing: Needle valve assembly nano-ultra-precision grinding, atomization and sealing performance comparable to the original factory, stable for 150,000 kilometers.

Full-condition bench verification: 1 million high-voltage pulse tests, suitable for YD25 high-load conditions.

Ready to use: Comes with QR correction code, directly installs into the vehicle, no matching required, consistent performance.

High cost-effectiveness: Priced at 1/3 of the original assembly, repair rate 95%+.

VII. Installation and Testing Points

Environment: Ultra-clean and dust-free environment, strictly prevent impurities from entering the assembly.

Installation torque: Injector locking nut 48±4 Nm, high-pressure connector 45±5 Nm.

Mandatory replacement parts: High-pressure copper gasket, O-ring (included in overhaul kit).

Common Rail Test Standards:

1500bar High-Pressure Seal: No leakage

Injection Uniformity: Cylinder Error **≤±3%**

Return Flow: 1.0–1.6ml/min (250bar)

VIII. Differences from Other Models in the Same Series

095000-5650: Dedicated to Nissan YD25, Euro 3/Euro 4 compatible

095000-5600: Compatible with Mitsubishi 4D56, not interchangeable

095000-5474: Compatible with Isuzu 4HK1/6HK1, not interchangeable

Welcome to ERlKC Diesel injector Parts Store!
Manager：Funda

There are many auto parts in our shop.If you can't find the accessories you needyou can contact me.Thank you!
Condition:

100% NEW , high quality, easy to install

Please make sure the interchange partnumber matches the part you are replacing
Please check our photos and make sure thepart shown looks identical to your stock one.

【VEHICEL APPLICATION】: Most Car
【MATERIAL】We only use the highest grade materials,built to Strict Quality Control Standards, Meets the OEM standards.Every product must take inspected and tested multiple times before the shipment.
【NOTICE】: Please use the year/make/model drop down bar confirm the compatibility before purchasing. And make sure our part number is the same with your existing one before purchase!
【WARRANTY】: Order from ERIKC, Please recognize our brand name: ERIKC , We can't guarantee the quality of other sellers provided can be same as ours.And if our products bring your any trouble,please contact us,We will help you solve out immediately.
100% Brand New , High Quality .

Shipping:

• We Ship to Worldwide,
• Items will be shipped within 3 business day on payment received.
• Shipment is directly from Hongkong Post via regular airmail. it usually takes 10-15 business days shipping to USA ,
• and shipping to other place will take about 25-35 days. Due to variation of postal service in different areas, some areas may take a little longer.

Payment:

• We accept PayPal only.
• All major credit cards are accepted through secure payment processor PayPal.
• Payment must be received within 7 business days of auction closing.
• We ship to your eBay address. Please make sure your eBay address is correct before you pay.

Warranty and Guarantee:

• 12 months Warranty. Buy with confidence!
• During the warranty period, we can exchange new one or refund.

Other Policies:

• We are not responsible for any custom duty or import tax.
• Serious Buyer Only! Please place bid only if you agree with all the terms.