Individual kit pieces
We also sell individual pieces from selected complete motorcycle and motocross kits, so you can buy just the part you need.
Availability and included items are specified in each listing.
Single-Seat Tail Cover Stripe Sticker for Ducati Monster 400/600/750/900
FROM A SINGLE DECAL TO A COMPLETE KITGLOSS FINISH ON EBAYSUPPORT BEFORE AND AFTER YOUR ORDER
How to choose your design
This category does not support choosing a design through the variations menu. Simply specify your preferred design in the note at checkout or send us a message through eBay, including the name or number of the design shown in the listing.
WELCOME TO ZETA GRAPHICSA passion for motorcycles.
A passion for motorcycles.
An eye for detail.
We make decals and graphics for motorcycles and motocross bikes. From restoring a small detail to refreshing the entire look, each product is made for a different project.
Cut-vinyl and printed replicas
Two different processes: cut-vinyl decals and replica decals printed on film. Both reproduce the reference details, but their construction is different.
The product type is specified in the listing.
Graphics and kits
Coordinated pieces and kits to change your bike’s look, according to the model and design you choose.
For motorcycles and motocross bikes, depending on model and version.On eBay, gloss finish only.
The products in our eBay listings are available with a gloss finish. Quantity, dimensions, colours, and compatibility are as specified in the individual listing.
ABOUT USBehind every decal,
Behind every decal,
there’s Zeta Graphics.
We are an Italian business dedicated to motorcycle and motocross graphics and decals. We make all our products ourselves: individual decals, lettering, replicas, and graphics kits. From design to production, we pay attention to every detail.
We know how important it is to choose the right detail. That’s why we help you understand the item’s dimensions and features and answer your questions before application.
We use Substance materials for our graphics. The adhesive film, any protective laminate, and the specifications depend on the product: not every decal has the same construction.
A construction designed
for your bike.
MOTORCYCLE GRAPHICS
Approximately 400 µm
Diagram, top to bottom: protective laminate, printed adhesive film, release liner to remove before application. Dry or wet application. Illustration not to scale.
Our motorcycle graphics combine printed adhesive film with a protective laminate, using Substance materials.
The adhesive film carries the printed graphic. The clear laminate protects the print from abrasion and wear and provides the gloss finish.
Approximate overall thickness: 400 µm.
MOTOCROSS GRAPHICS
531 µm
Diagram, top to bottom: protective laminate, printed adhesive film, release liner to remove before application. Dry application only. Illustration not to scale.
Our motocross graphics have a stated overall thickness of 531 microns, including the adhesive film and protective laminate.
This construction applies to motocross graphics and individual pieces made from the same material. Dry application only.
These thicknesses refer to laminated motorcycle and motocross graphics, and do not automatically apply to cut-vinyl replicas or other printed decals. The product type described in the listing applies to each item.
They can copy the design.
It’s not the same product.
Designed and made by us
We do not copy other companies’ designs. All original Zeta Graphics designs we present are created and produced by us. Reproductions of our designs sold by other companies without our permission are copies: they are not Zeta Graphics products.
Selected and developed cutting templates
We only use cutting templates developed by leading companies in the field or created in-house through testing and trials. Templates define the cut and placement of the pieces on the bodywork and are a fundamental part of our product.
A copy of our design is not equivalent to one of our kits.
If another seller reproduces one of our graphics without permission, a similar appearance in photos does not mean you will receive the same materials, workmanship, or, most importantly, the same cutting templates used by Zeta Graphics. Copying the artwork does not make the product identical.
This section concerns original Zeta Graphics designs. Items expressly described as replica decals reproduce the reference lettering and details and are not genuine parts from the motorcycle manufacturer.
FOCUS / OUR REPLICA DECALSSame dimensions.
REPLICAS, NOT GENUINE OEM PARTS
Same dimensions.
Same appearance.
REPLICAS, NOT GENUINE OEM PARTSSome of our products, such as Ducati replica lettering, reproduce the dimensions, colour, and appearance of the original reference decals. They are made by Zeta Graphics and are not genuine parts from the motorcycle manufacturer.
Cut vinyl and printed decals: what’s the difference?
Cut vinyl: lettering and shapes are cut from the film, and the excess material is removed. Transfer tape keeps the pieces aligned so they can be applied together, without a continuous background between the letters.
Printed replicas: the design and colours are printed onto adhesive film, which is then cut for the product. This is a different process from cut vinyl. Transfer tape alone does not identify a decal as cut vinyl.
What is transfer tape for?
It is the application film that holds the decal pieces together and keeps them aligned during placement. It is removed after application, leaving only the decal on the surface.
Transfer tape is not a protective laminate.
Transfer tape is removed after application. The laminate, where included in the product, stays on the print to protect it.
Transfer tape is removed after application. The laminate, where included in the product, stays on the print to protect it.
Replica decals listed for the fuel tank are supplied as a pair for the left and right sides, except where a listing expressly specifies a single decal. Always check the quantity, dimensions, and item version. These replicas are not manufactured or marketed by the motorcycle manufacturer.
The right application makes a difference.
Before starting, check the quantity, dimensions, colour, and that the item matches your order. Test the positioning with the backing paper still in place. If you notice anything wrong, contact us before applying or modifying the product.
MOTORCYCLE KITS / EXCLUDING MOTOCROSS KITS
Dry or wet application.
Our motorcycle kits can be applied dry or wet, following the specific product instructions.
Dry application
Clean and dry the surface thoroughly. Align the graphic, remove the backing paper a little at a time, and use a soft squeegee to work from the centre toward the edges without overstretching the decal.
Wet application: step by step
This procedure applies to our motorcycle kits suitable for wet application. Do not use it for motocross kits.
- Prepare the surface. It must be clean and free of grease, wax, and residue. First test the position of the graphic with the backing paper still in place.
- Prepare the spray bottle. Use water with just one drop of washing-up liquid and a spray bottle that produces a fine mist. Mix gently without creating foam. Do not add more soap to make the liquid more slippery.
- Mist and position. Apply a thin, even mist of solution to the application surface and adhesive side, avoiding touching the adhesive with your fingers. Position the graphic and adjust its alignment before using the squeegee.
- Push all the water out. Hold the graphic in place and use a soft or covered-edge squeegee. Work from the centre toward the nearest edge with even, overlapping strokes. Push the liquid all the way out: do not simply move pockets of water around beneath the decal.
- Dry and repeat. Use a clean cloth to absorb the liquid coming out at the edges. Repeat the strokes over any areas that are still wet, along curves, and around the perimeter without scratching or distorting the graphic. No pockets of water should remain trapped: waiting alone is no substitute for proper squeegee application.
- Let the bike stand. After application, keep the bike stationary and protected from water for at least 24 hours. We recommend waiting 48–72 hours before riding or washing it, allowing more time for drying and adhesion. Before use, check that the graphic is secure and all edges are firmly attached. If they are still wet or lifting, wait and contact us.
MOTOCROSS KITS
Dry application only.
Do not use water or application fluids for motocross kits.
- Prepare the plastics by removing dirt, grease, and wax residue with a compatible product. The surface must be completely dry.
- Test the position of the graphic before removing the backing paper.
- Expose a small area of adhesive, align it, and apply progressively from the centre outward.
- Work around curves and edges without distorting the print. Follow the kit instructions for more complex areas.
For modified, painted, or damaged plastics, ask for advice before application. If you lack experience, consider a professional installer.
Three steps to follow carefully.
01 / PREPARE
Clean and test the position
The surface must be clean, dry, and free of grease or wax. Check alignment before removing the backing paper.
02 / APPLY
Remove the backing paper
The pieces must stay on the transfer tape. Position the decal and press with a soft squeegee, working from the centre outward.
03 / FINISH
Peel off the transfer tape slowly
Fold the film back over itself, keeping it close to the surface. If a piece lifts, lay it back down and press before continuing.
Follow the specific instructions supplied with the product. The procedure may differ for decals without transfer tape and for graphics kits. If in doubt, message us before applying.
Other finishes?
The Zeta Graphics range also includes other finishes and print options. These processes are not offered on eBay: only the gloss finish is available here.
MATTSILVER CHROMEHOLOGRAPHIC CHROMEGLITTER
Options depend on the product. Not included in eBay listings.
Your own idea?
Our Full Custom service is for those who want completely personalised graphics developed around their own requirements.
Full Custom is a Zeta Graphics service that is not offered on eBay and is not included in products available for purchase on this platform.
A question? A problem?
Let’s talk.
For us, support is part of the product. We help you choose the right item, answer application questions, and address any issues after your order.
Before leaving negative feedback, contact us through eBay.
Describe what happened and attach helpful photos. We will review the issue and work to help you find a solution. Support remains available regardless of your feedback.
Check first. Apply with care.
If anything does not match your order, stop applying and contact us. Photos of the product and surface will help us assess the situation before application makes the problem harder to identify.
The information that matters.
What will I receive?
The product and quantity described in the listing. The showcase images illustrate our work; they do not show everything included in your purchase. Motorcycles, body panels, and display accessories are not included.
How do I check that it’s right for my bike?
Check the dimensions, colour, model, year, and version where specified. For shaped kits, make sure the bike has the bodywork intended for the model and year listed. If it has aftermarket bodywork or modifications, contact us through eBay before purchasing.
Are the colours in the photos accurate?
Displayed colours may vary slightly depending on your screen and the lighting. This display variation is separate from the product’s specifications: for replica items, the match to the original colour is as stated for that particular replica.
What are the time frames?
Dispatch time, postage, and estimated delivery are shown in the listing and order summary. Check those details for the product you are purchasing.
I need help after ordering
Contact us through your eBay order, explain the problem, and attach helpful photos. For return terms and conditions, see the Returns section of the individual listing.