Description

 

Introduction:
- The KMBOX NB version is currently the top of the line keyboard and mouse controller in the same price range, supporting a maximum return rate of 8KHz (with a full link bandwidth of 480Mbps for HOST and Device), and supporting all functions of both Net and B versions, hence abbreviated as NB version.

Hardware Specifications (Maximum Limit Parameter):
- CPU (processor): 64 bit high-performance processor, default operating frequency 700MHz, can overclock up to 1.2GHz (approximately equivalent to 5 times the B version and 8 times the Net version)
- RAM (memory): onboard 128MB DDR memory. The original B-version SRAM is 512KB, and the original Net version RAM is 196KB. Equivalent to 512 times the B version and 1337 times the Net version
- ROM (hard drive): 128MB Nand flash. (Original B version 4MB, original NET version 256KB. Equivalent to 34 times the size of B version and 512 times the size of Net version)
- Network communication speed: 100Mbps, which is 10 times faster than the original NET version.
- Serial communication speed: the same as version B. (It is not recommended to use a serial port here because the speed is slow and unstable, unless the software only supports serial ports. Serial port speeds above 4Mbps may cause error problems, while network ports can have speeds of 70-80Mbps.)
- Display: 2.8-inch full-color RGB screen, same as AI version, supporting built-in UI.
- RJ45 wired network port: reserve an RJ45 wired network port, and the NB version can be directly connected to a switch for batch control. (Customized function, not available in the standard version)
- DIP switch: used to control whether mouse messages take effect inside the box or are uploaded to the host.
- 3pcs LED: display the port status of the box

Software Specifications:
1. The NB version defaults to driver direct mode: whatever device is connected to the box, the computer will display it. All data can be transmitted directly, using the original device driver program without the need for learning or customized simulation.
2. The NB version supports all functions of the original Bpro version, can write scripts for Python, and can run offline on board. The tutorial is the same as Bpro. In addition, third-party software that supports the Bpro version can directly use the NB version.
3. The NB version supports all protocols of the original Net version, and third-party software that supports the Net version can directly use the NB version. The communication speed is 10 times faster than the original Net, with a maximum of 8000 calls per second (in 8K mode).
4. The NB version comes with an internal UI by default, so there is no need to download the upper computer software. You can directly set it in the internal UI of the box, which is simpler and more convenient.
5. The NB version supports advanced curve algorithms, and its CPU performance, RAM, and ROM allow for complex high-order moving algorithms.
6. The NB version supports arbitrary modification of IP, Port, UUID.
7. The NB version supports real-time baud rate switching, upycraft writing offline scripts, and encryption scripts. Please refer to the Bpro user manual for all software functions.
8. The NB version supports manual trajectory learning algorithms and supports switching the return rate for uploading to the PC end. The range of return rate is: 125, 200, 250, 500, 1000, 1600, 2000, 4000, 8000Hz
9. Support web firmware upgrade, no need to install any drivers, and there are no features or residual issues.
10. Supports multiple languages, and overseas users can switch to an English interface.
11. The firmware is permanently upgraded for free, and new features and functions are permanently used for free. For more new features, please refer to the official website documentation.

Package Included:
- 1 x KMBOX