eBay

PROFESSIONAL DENT REPAIR KIT: PDR dent puller kit contains all tools needed to car dent repair. Adjustable Dent Lifter, Bridge Dent Puller, 2 In 1 T-bar Puller. We are experts on repairing car dents. Choose car dent to repair tool that please identifies - PDR.
SCIENTIFIC DESIGN: Different from most dent repair kit in the market, we have added a new suction cup dent puller will not damage the original car paint, effectively increasing the success rate of paintless dent repair. At the same time, The adhesion of our glue sticks are strengthened, glue removal made easy.
PAINTLESS DENT REPAIR: It is 100% paintless dent removal. The bottom of the bridge dent puller and dent lifter are made of rubber and will not damage the original paint. After the dent removal tool pulls out the dent, spray alcohol with a concentration of 90% or more on the remaining glue, the glue residue can be completely removed without damaging your original paint.
REPAIRS DENTS OF ALL SIZES: Bridge puller can repair dents within 7 inches. It is equipped with six kinds of prismatic design pull rods, not only can the glue at the bottom stick more firmly but also prevent skidding and protect your car paint from damage. Our 2-in-1 T-bar puller can be used for almost big dents. Also it can be disassembled into short T-bar puller for use, which is very convenient and effective.
QUALITY ASSURANCE: The company integrates research and development, production and sales, and exports its products to more than 200 countries and regions around the world, and has obtained more than 100 intellectual proper ty such as technology patents. All products are subject to strict quality control before delivery. We are professional manufacturers and honest sellers. No matter what problems you encounter, please be sure to contact us!

This dent repair tool are simple design, easy to use and comes with detailed repair introduction, will help you do better operation, most of dent could be finished in half an hours. The kit provides the user with multiple dent pulling methods making it the most complete and versatile dent pulling kit on the market. （This kit is not suitable for dead ends/creases/folds/elongated dents.）
Operation Tips: To repair the different size of car dent, there is important that as the dent size to pick the corresponding repair tool, but also need us to carry out the correct operation to better get a good effect.We do the hot choice sincerely, we compare a number of sources of manufacturers to finally decision this set, compared to other product on the market, our glue adhesive force is better, can be better with our tools to achieve better results.
ALL IN ONE: The Dent Repair Kit can repair dents of different sizes. Primary tools include Gold Dent Lifter, Bridge Puller and T-Puller.
Material quality: All material we use is Lead-free, Eco-friend and hypoallergenic, without chemicals or other bad material. This is paintless dent repair tools, we use rubber/sponge as base in our pullers, which are friendly to your car paint when you use them on your car.
You need to fully heat the glue gun for 10 minutes before use so that the glue can be fully dissolved, the glue covers the connecting tool and the tabs, please wait for 1-2 minutes for the glue to cool down and solidify before pulling the operation, you can use your fingernail to extract a small piece of glue to make sure before the operation. we suggest to use a hairdryer in conjunction with the post-cleaning work to remove glue residue, and not to use hard objects to scrape.

Package Include:
1PC handbag
30PCS suction cup
2PCS scraper
1PC glue gun (UK standard)
1PC hammer
1PC alloy puller
Balance bridge suction cup + 8 heads
Flat pen + 9 heads
10PCS glue stick
1PC tensioner
1PC manual

Specifications:
Material: plastic + aluminum
Product size: 18*14CM
Power: 100W
Voltage: AC100-240V
Cable length 1.5M
Minimum spit out: 1ml
Glue stick: thickest 1.2CM
Heating time: 3-5 minutes
Nozzle diameter: 2MM

On 23-Jun-2026 at 07:12:37 BST, seller added the following information:

On 24-Aug-2026 at 13:51:46 BST, seller added the following information: