Refurbished Toyota 4Runner Hilux Surf GRN215 Rear LSD 3.727
41110-35C70
PROFESSIONALLY REFURBISHED GENUINE TOYOTA REAR LSD DIFFERENTIAL
Toyota OEM Part Number: 41110-35C70
OE Cross-Reference: 41110-35C71
Position: Rear
Final-Drive Ratio: 3.727:1
Crown Wheel and Pinion: 41:11 teeth
Differential Type: Mechanical Limited-Slip Differential – LSD
Condition: Professionally Refurbished
Universal Fitment: No
Warranty: 30 days, subject to the terms below
PRODUCT DESCRIPTION
Genuine Toyota complete rear differential carrier, also known as a third member or differential center, professionally refurbished and supplied as a complete built unit.
This assembly is fitted with a mechanical limited-slip differential and a 41-tooth crown wheel with an 11-tooth pinion, producing a 3.727:1 final-drive ratio.
THIS IS A COMPLETE BUILT DIFFERENTIAL ASSEMBLY. IT IS NOT AN EMPTY HOUSING, LOOSE LSD CENTRE OR CROWN-WHEEL-AND-PINION KIT.
This is a professionally refurbished genuine Toyota assembly manufactured from a previously used original Toyota core. It is not factory new. Serviceable original components may be retained following inspection.
RECOMMENDED EBAY ITEM SPECIFICS
Brand: Toyota
Manufacturer Part Number: 41110-35C70
OE/OEM Cross-Reference: 41110-35C71
Product Type: Complete Rear Differential Carrier / Third Member
Placement on Vehicle: Rear
Gear Ratio: 3.727:1
Gear Tooth Count: 41:11
Differential Type: Mechanical LSD
Engine Application: 1GR-FE 4.0-litre V6 petrol
Drivetrain: Four-wheel drive
Condition: Professionally Refurbished
Universal Fitment: No
Approximate Unpacked Weight: 29.4 kg
Warranty Period: 30 days
VEHICLE COMPATIBILITY
Toyota 4Runner:
Chassis codes: GRN215 and GRN215L
Engine: 1GR-FE 4.0-litre V6 petrol
Drivetrain: 4WD
Approximate catalog-family coverage: August 2004 to August 2009
Required specification: rear 3.727-ratio mechanical LSD
Toyota Hilux Surf:
Chassis code: GRN215W
Engine: 1GR-FE 4.0-litre V6 petrol
Drivetrain: 4WD
Approximate catalog-family coverage: August 2005 to August 2009
Required specification: rear 3.727-ratio mechanical LSD
Compatibility dates are provided as an identification guide. Not every vehicle produced during these years uses the same differential.
The buyer must confirm the VIN, chassis code, production date, axle code, gear ratio and original differential type before ordering.
DIRECT OE REFERENCES
41110-35C70 ? Complete rear 3.727 mechanical LSD carrier assembly
41110-35C71 ? Associated later/service assembly number; confirm by VIN
RELATED COMPONENT NUMBERS
These are component references associated with the differential family. They are not complete-assembly substitutes:
41201-80564 ? Rear 41:11 final-gear kit
41302-35041 ? Rear mechanical LSD case sub-assembly
41302-35040 ? Related earlier differential-case number
41039-34070 ? Differential internal gear kit
41101-35171 ? Rear differential carrier housing
41101-35170 ? Related earlier carrier-housing number
41204-35100 ? Rear-drive pinion companion flange
OTHER TOYOTA 41:11 / 3.727 PART NUMBERS
The following Toyota numbers are associated with other complete differential assemblies or final-gear kits using the same 41:11 ? 3.727 ratio.
41110-35C70.
Complete rear-carrier family numbers:
41110-3D470
41110-35C60
41110-3D550
41110-3D551
41110-35C50
41110-35C51
41110-35C70
41110-35C71
41110-35B50
41110-35B51
41110-35B60
41110-35B61
41110-60A00
41110-60A01
Related 3.727 final-gear kit numbers:
41201-80189
41201-80193
41201-80453
41201-80563
41201-80564
Front differential numbers using the same 41:11 ratio:
41110-35A10
41110-35A11
41110-35A10 and 41110-35A11 are front differential assemblies and are not replacements for this rear differential.
Other 3.727 rear assemblies may be standard open differentials or electrically locking differentials. Matching the ratio alone does not confirm interchangeability.
NOT AUTOMATICALLY INTERCHANGEABLE WITH
Standard open differentials
Toyota electrically operated E-locker differentials
Front differential assemblies
Differentials with any ratio other than 3.727
Similar-looking Tacoma, FJ Cruiser, Prado or Lexus GX assemblies
GRN210, UZN210 or UZN215 units selected only by appearance
41110-35A10 or 41110-35A11 front differentials
Any assembly with different flange, housing, axle-spline or mounting specifications
WHAT IS INCLUDED
Complete rear differential carrier / third-member assembly
41:11 crown wheel and pinion
Mechanical LSD case and internal gear assembly
Installed carrier bearings, bearing caps and adjusters
Installed pinion and companion flange
Components expressly shown in the listing photographs
Axle housing, axle shafts, gear oil, mounting hardware, propeller shaft and unrelated accessories are not included unless expressly stated.
REFURBISHMENT AND PRE-DISPATCH INSPECTION
The differential has been professionally refurbished and assembled as a complete unit.
Before dispatch, Parts Zone will:
Check the carrier and pinion bearings for smooth rotation
Check for abnormal bearing noise and excessive free play
Inspect the crown-wheel and pinion teeth for visible chips, cracks, severe pitting or abnormal damage
Check ring-and-pinion backlash
Check the tooth-contact pattern
Reconfirm the 41:11 tooth count and 3.727 ratio
Reconfirm the mechanical LSD configuration
Inspect the companion flange, housing and visible mounting surfaces
Record security identification marks
Drain the oil as required for safe transportation
These checks confirm the condition observed before shipping. The assembly remains a professionally refurbished original unit and is not factory new.
CRITICAL 4WD RATIO WARNING
The front and rear differential ratios must match on a four-wheel-drive vehicle.
Installing this 3.727 rear differential in a vehicle with a different front ratio can cause driveline binding and serious damage to the front differential, rear differential, transfer case or transmission.
Do not order until the original ratio has been confirmed.
BUYER MUST CHECK BEFORE ORDERING
Please provide:
Complete VIN or chassis number
Vehicle production month and year
Chassis code
Engine and transmission details
Axle code from the identification plate
Photograph of the original differential
Original differential part number, if available
Confirmation that the required ratio is 3.727 / 41:11
Confirmation that the vehicle requires a mechanical LSD
Parts Zone will assist with identification, but final compatibility must be confirmed by the buyer or a qualified installer.
INSTALLATION REQUIREMENTS
Professional installation by a qualified differential or driveline specialist is strongly recommended.
Before installation:
Reconfirm the ratio, tooth count and LSD type
Confirm that the front differential ratio is also 3.727
Inspect the assembly after transportation
Check backlash, bearing preload and tooth-contact pattern
Inspect and replace seals, gaskets and service components where necessary
Clean the axle housing thoroughly
Use the correct Toyota-approved LSD gear oil
Use friction modifier only when required by Toyota or the lubricant manufacturer
Fill the assembly with the correct quantity of oil
Tighten all fasteners to Toyota specifications
Check for leaks, noise and correct LSD operation after installation
Damage caused by an incorrect ratio, insufficient or unsuitable oil, contamination, incorrect setup or improper installation is not considered a product defect.
EXPRESS SHIPPING
Express delivery normally takes approximately 3?6 working days after dispatch.
Processing time, weekends, public holidays, customs clearance and remote-area delivery are not included.
Delivery times are estimates and are not guaranteed.
A valid telephone number and complete delivery address are required.
Tracking will be uploaded to the eBay order when available.
The unit will be packed for heavy automotive-component transportation.
Delivery-address changes may not be possible after payment or dispatch.
REMOTE-AREA DELIVERY
Contact Parts Zone through eBay messages before ordering if the address is remote, rural, on an island or within a restricted courier-service area.
An additional courier surcharge may apply. Any surcharge will be confirmed before dispatch.
CUSTOMS DUTIES AND IMPORT CHARGES
Customs duty, import VAT, sales tax, brokerage, storage, clearance and destination-country charges are the buyer?s responsibility unless collected directly by eBay during checkout.
Customs delays are outside the seller?s control. The buyer must provide any documents or identification requested by the courier or customs authority.
Refused delivery or failure to complete customs clearance may result in recoverable shipping, storage or return charges being deducted where eBay policy and applicable law permit.
30-DAY RETURNS
A return request must be opened through eBay within 30 days of confirmed delivery.
For a working product returned because it was ordered incorrectly, is no longer required or is returned for change of mind:
The buyer is responsible for return shipping
Original outbound shipping may be deducted where permitted
A 25% restocking charge may apply where permitted by eBay and local law
The unit must be returned complete, securely packed and in its original supplied condition
All security marks must remain present and unchanged
Refund processing begins after the returned unit has been delivered and inspected
25% RESTOCKING / VALUE-LOSS DEDUCTION
For a working product returned because of buyer error, incorrect ordering or change of mind, a 25% restocking charge may be deducted where the applicable eBay marketplace and local law permit.
Where a routine restocking charge is not permitted, a deduction of up to 25% may be applied only when supported by an actual reduction in value caused by installation, use, alteration, contamination, damage, missing components, broken security marks or inadequate return packaging.
No restocking deduction applies to an item confirmed faulty, damaged in transit or materially not as described.
FAULTY OR NOT-AS-DESCRIBED RETURNS
Contact Parts Zone through eBay within 30 days of delivery
Do not dismantle, modify or return the unit without instructions
Provide the VIN, axle code, installer?s findings and reasonable photographs or video
Parts Zone may provide troubleshooting instructions before authorizing a return
A verified faulty or materially not-as-described item will be handled according to eBay policy and applicable law
No restocking charge applies to a verified faulty item
RETURNED IN A DIFFERENT CONDITION
Do not exchange, remove or substitute the crown wheel, pinion, LSD case, bearings, flange or internal components.
Do not dismantle, weld, grind, machine, modify or repaint the assembly without written authorization.
If the item is returned altered, dismantled, incomplete, contaminated, component-swapped or damaged, the refund may be reduced or refused to the extent permitted by eBay policy and applicable law.
Installation does not remove the buyer?s rights regarding a genuine product fault or material listing error.
30-DAY FUNCTIONAL WARRANTY
The warranty begins on the confirmed delivery date and covers a verified internal mechanical defect in the supplied refurbished differential assembly.
Unless required by applicable law, the warranty does not cover:
Incorrect vehicle application, axle ratio or differential type
Mismatched front and rear ratios
Incorrect, contaminated or insufficient gear oil
Normal cosmetic wear or service items
Incorrect backlash, bearing preload or tooth pattern after installation
Improper installation or unauthorized dismantling
Damage caused by another driveline component
Racing, competition, overloading or modification
Labor, removal, refitting, towing, diagnostic, storage or vehicle-hire costs
Mandatory consumer rights and the eBay Money Back Guarantee are not restricted.
WHOLESALE AND BULK ORDERS
Wholesale stock is available for customers requiring a minimum order of 10 complete differential units.
Important wholesale conditions:
Minimum wholesale quantity: 10 complete units
Wholesale units are used and are not refurbished
Units are supplied in very good used condition
Available ratios, differential types and part numbers depend on current stock
Wholesale units may show normal cosmetic wear, storage marks and identification markings
Photographs, quantities and available specifications will be confirmed before the order
Wholesale prices are provided by quotation
Packaging and delivery charges are quoted separately
Retail refurbished-unit terms do not automatically apply to wholesale used stock
Wholesale orders are subject to separately agreed written specifications and terms
WHOLESALE DELIVERY TO AFRICAN CUSTOMERS
For wholesale orders intended for African destinations, Parts Zone can deliver the goods to the customer?s nominated shipping agent or freight forwarder in Dubai.
Wholesale delivery is to the Dubai shipping agent only. It is not delivery to the final African destination.
The buyer and the buyer?s Dubai shipping agent are responsible for:
Export arrangements from Dubai
Ocean, air or land freight to the destination country
Freight insurance
Customs documentation
Import duties and taxes
Port, storage, handling and clearance fees
Onward delivery inside the destination country
Parts Zone?s wholesale delivery obligation is completed when the consignment is delivered to or collected by the buyer?s nominated Dubai shipping agent, subject to the written wholesale quotation and applicable law.
Contact Parts Zone through eBay messages for current wholesale availability, minimum-10-unit prices, part-number requirements and Dubai-agent delivery charges.
IMPORTANT FINAL NOTICE
Purchase only after confirming the VIN, axle code, 3.727 ratio and mechanical LSD specification.
The listing photographs form part of the description. Only the components expressly stated and shown are supplied.
All communication, payment, return requests and refunds for an eBay transaction must remain within eBay. Return requirements.