🔋 LKTOP Luna Battery Handle for Insta360 Luna
5000mAh 21700 Cell / 18.25Wh / Dual USB‑C I/O / ~9H Runtime / 1/4″ Thread / 4‑LED Indicator
✅ Compatible Product
- Camera: Insta360 Luna only.
Does NOT fit: Insta360 Luna Ultra, Go series, Ace Pro, or any non‑Luna model.
📦 Package Contents
- 1 × LKTOP Luna Battery Handle
- 1 × Instruction Manual
- 1 × Dual USB‑C Cable (optional, depending on bundle)
Insta360 Luna camera NOT included
🔍 Product Overview
The LKTOP Luna Battery Handle transforms your Insta360 Luna into an all‑day creator tool. Its integrated 5000mAh 21700 lithium‑ion cell (18.25Wh) works in tandem with the camera's internal battery, extending continuous recording to up to 9 hours (lab tested at 25°C, 1080p/24fps). The ergonomic grip features a press‑to‑release quick‑mount clamp that locks the Luna securely in place, while the bottom 1/4″ thread expands your rig. With dual USB‑C ports, it doubles as a power bank to top up phones, lights, or other gear in the field.
✨ Key Features
🔋 5000mAh Extended Runtime
- Built‑in 21700 cell delivers up to 9 hours of combined camera + handle runtime.
- Handles a full recharge of the Luna camera approximately 1 time from empty.
- No more swapping batteries mid‑shot during long timelapses or travel vlogs.
⚡ Dual USB‑C Bidirectional Power
- USB‑C2 (back): Input 18W Max (5V/3A, 9V/2A, 12V/1.5A); Output 20W Max (5V/3A, 9V/2A, 12V/1.67A).
- USB‑C1 (top): Output 10W Max (5V/2A) dedicated to powering the Luna.
- Dual output (C1+C2): 15W Max shared.
- Functions as an emergency power bank for smartphones, LED fill lights, etc.
🛡️ Comprehensive Safety
- 8‑layer protection: temperature, short‑circuit, input/output over‑voltage, input/output over‑current, battery over‑charge, battery over‑discharge.
✋ Ergonomic Grip + Quick Release
- Compact 114.5×34×36mm, just 128g — balanced handheld feel.
- Press‑type quick‑mount clamp locks Luna firmly, no wobble during motion shots.
- 4 front LEDs show remaining handle capacity at a glance; press button to check level.
🌡️ Wide Operating Range
- Working temp: 0°C to 40°C; charging temp: 5°C to 45°C.
⚙️ Technical Specifications
💡 Usage Tips
- Use DJI 30W/65W or LKTOP 30W/65W GaN chargers for optimal replenishment.
- Charge in environments below 25°C; if internal temp rises too high, 4 LEDs will flash and charging pauses — this is normal temperature protection.
- Do not cover the handle while charging to allow proper heat dissipation.
- For grip‑only use without powering the camera, double‑press the battery button to toggle output off (where supported).
⚠️ Important Notes
- Insta360 Luna only — not compatible with Luna Ultra or other Insta360 models.
- Actual runtime and output capacity vary with ambient temperature, recording resolution/frame rate, and connected device power draw.
- USB‑C2 port has no data transfer function; avoid simultaneous C1+C2 output to maintain efficiency.
- Manual measurement variances in weight/dimensions are normal; refer to the physical product.