Features:
--Wind & Solar MPPT charging method, make sure the power get max input into the battery and high charging efficiency.
--Can be used for 3000W wind turbines with high compatibility.
--Independent boost circuit: solved the charging efficiency of low power vertical wind generator.
--12V/24V (12V/24V/48V) system auto detect function.
--Mini size, easy to install.
--LCD display with visible and intuitive parameters.
--Nominal wind power: 100-1000W.
--PV rated power: 100-2000W
Functions:
✔ Wind generator MPPT boost charge function.
✔ Wind PWM dump load, external dump load resistor, intelligent solar charge separation.
✔ Dual power supply function: battery + solar power supply.
✔ LCD shows parameters such as voltage and current of wind, solar and load. Some parameters can be set by the user.
✔ DC output with 3 output modes.
✔ Controller inner board is sprayed with protective paint to prevent dust, moisture and static electricity.
Package List:
1 x Double-MPPT Wind & Solar Charger Controller
1 x External Dump Load
Specification:
Rated system voltage: 12V、24V、48V、12/24 ATUO、24/48V AUTO(ONE OF FIVE)
Rated wind power: 600W/12V,800W/24V,1000W/48V
Rated PV power: 1000W/12V,1500W/24V,2000W/48V
Charge way for Wind turbine: Mppt boost &PWM
Charge way for PV: MPPT&PWM
Max input voltage for wind : 12/24V system:wind≤80V ;48V system:wind≤130V
Max input voltage for solar: 12/24V system:solar≤80V;48V system:solar≤130V
Dump load way: External dump load ,wind power ≤1KW with R1,wind power ≥1KW with R2
No-load Current (DC): ≤0.06A
Controller power mode: Battery or solar panel
Output load working mode(Mode): Mode 1: Light-control on. Light-control off (3 modes adjustable)
Display: LCD display (clear and easy to understand )
Display content: LCD display,Voltage, Percentage of battery power, Current, working mode of load, etc
Protection: Solar Reversed Charging protection,Battery open circuit protection、battery anti-reverse connection protection protection、Over current and over voltage auto brake protection、Over load protection,etc.
Cooling mode: Cooling fan and self-cooling
Workingtemperature/ Relative humidity: ﹣20~﹢55℃/35~85%RH (non-condensing)
NW. For R1,R2: R1:0.95Kg 、R2:1.35Kg
Dump load size :R1:210*70*130mm、R2:200*90*150mm









