Camshaft Sprocket Holding Tool, Compatible with Audi, for VW, for Skoda, Pulley Fixing Tool Set, Wrench Camshaft Holder for VAG, Universal Pulley Holder Spread, T10172 T10554
Features
Compatible With: This camshaft sprocket holder tool kit is fit for VAG ( Compatible with Audi, Compatible with Seat, Compatible with Skoda, Compatible with VW) Vehicles, for 1.2/1.4/1.6/2.0 TDI common rail diesel engines, 1.9/2.0 pump nozzles and 1.6 MPI.
High-Quality Design: The camshaft pulley holder tool set is of high quality and durable, not easy to bend or break, and has a long service life. The camshaft pulley holder features interchangeable pins and is used for installing and removing the timing belt pulleys on the camshaft, vibration damper, and oil pump.
T10172 Camshaft: The camshaft wrench with interchangeable pins, comparable to VAG 3036 T10172. The total length is 415 mm, the maximum opening width is 140 mm. It has two pairs of pins, one of which can be pivoted to adapt to the hole spacing.
OEM: Pulley Holding Tool Set replace T10172; T10172A; T10172/4; T10172/1; T10172/2; T101554; T10172/10; T10172/11; T10172/5; T10172/5; T1010172/5; T1010172/5; T10101772/6 ; T10172/7; T10172/8; T10172/9; T10554.
Suitable Engines: Camshaft pulley fastening tool set for installing and removing camshafts, replacing timing belts, checking and adjusting camshaft timing, locking crankshafts, and much more. The wrench can be rotated to adjust the hole spacing. Engine codes: AFK AHW AJV AKQ APE AQQ ARR AUA AUB AXP BAD BBY BBZ BCA BKY BUD.
Application:
Fits a variety for VAG models, Compatible with Audi A1, A3 (8V), A4 (B9), A5 (F5), Q2, Q3 (8U), Compatible with Seat Alhambra II, Arona, Ateca, Ibiza (Typ 6J/6P), Ibiza (6F), Leon III, Toledo IV.
Compatible with VW Beetle, Golf VII, Passat (B8), Polo V, Polo VI, Sharan II, Tiguan I, Tiguan II, Touran II, T-Roc, up.
Compatible with Skoda Citigo, Fabia III, Karoq, Mii, Octavia III, Rapid, Superb III, Yeti.
Compatible for 1.2 / 1.4 / 1.6 / 2.0 TDI Common Rail Diesel, 1.9 / 2.0 Pump Nozzle and 1.6 MPI engines.
Engine codes: AFK AHW AJV AKQ APE AQQ ARR AUA AUB AXP BAD BBY BBZ BCA BKY BUD.
Applicable to: A4/A6/A8 3.2FSI A6L/QUATTRO 2.4.
Multifunctional:
This tool is ideal for the professional installation and removal of the camshaft, changing the timing belt, checking and adjusting the camshaft timing, locking the crankshaft and much more.
Steps:
1. Attach the retaining bracket "T10172" and the pin "T10172/2" to the left intake camshaft adjuster.
2. Press the retaining bracket in the direction of the arrow to keep the camshaft timing chain pretensioned. At the same time, install the camshaft bolts using the socket set.
3. Install "T10035" and tighten by hand.
Set includes:
1 wrench, 425 mm long, jaw width 0-140 mm
1 set: length 30 mm, diameter 11.5 mm
1 set: length 27.4 mm, grade 3 Ø 12/10/6 mm
1 set: length 27.4 mm, diameter 4.8 mm
1 set: length 6 mm x 15 mm
1 set: length 15 mm x 12 mm
1 set: length 15 mm, diameter 17 mm
1 set: length 15 mm, diameter 20 mm
1 set: length 15 mm M10 – star with 12 points
1 set: Length 15 mm M12 – Star with 12 points
1 adapter for locking the camshaft sprocket
















