Key Features
🔬 3-in-1 Multifunction Tool – Combines a 50MHz dual‑channel oscilloscope, a 6000‑count true‑RMS multimeter, and a built‑in signal generator in one compact handheld device. No more switching between multiple benchtop instruments—this single unit handles waveform analysis, component testing, and signal output.
📊 50MHz Bandwidth with Dual Channels – Capture and compare two signals simultaneously with 50MHz analog bandwidth. Whether you're debugging a switching power supply, analyzing sensor outputs, or troubleshooting audio circuits, both channels are ready to work.
⚡ Dual Sampling Modes for Any Signal – Choose between 200MSa/s (Normal Mode) for general‑purpose measurements up to 30MHz, or switch to 280MSa/s (High‑Speed Mode) for signals up to 50MHz. The "Peak Detection" mode captures narrow glitches, while "High Resolution" mode delivers cleaner waveforms for high‑frequency signals.
🖥️ 3.5‑inch IPS Full‑View Color Display – Crisp, wide‑viewing‑angle screen with 6000‑count resolution for the multimeter. View waveforms and measurement values clearly even in bright workshop lighting or awkward angles.
🎛️ Built‑in Signal Generator – Output sine, square, triangle, half‑wave, full‑wave, sawtooth, and DC signals with adjustable amplitude (0.1V–3V) and frequency (1Hz–2MHz). Perfect for testing circuit response, sensor simulation, or educational demonstrations—no separate function generator needed.
🔋 4000mAh Rechargeable Battery – Long‑lasting lithium battery keeps you working in the field or on the workbench without hunting for wall outlets. The battery level indicator and charging status are always visible on screen.
📏 Complete Multimeter Functions – Measure DC/AC voltage (up to 1000V DC / 750V AC), DC/AC current (up to 10A), resistance (up to 60MΩ), capacitance (up to 60mF), diode, and audible continuity. True RMS measurement ensures accurate AC readings on non‑sinusoidal waveforms.
📌 Cursor Measurement & Data Logging – Use horizontal and vertical cursors to precisely measure voltage differences and time intervals on captured waveforms. Save waveform screenshots to internal memory and transfer them to your computer via USB‑C for documentation or further analysis.
🎯 One‑Button Auto Setup – Press the AUTO key and the oscilloscope automatically identifies the waveform type, adjusts amplitude and time base, and displays a stable waveform. Perfect when you're not sure what to expect—or when you just want to start measuring immediately.
🛡️ Comprehensive Safety Protection – Overvoltage protection, CAT II rated, with clear warnings for voltages above AC 30V or DC 36V. The probe ground is common across both channels—designed with user safety in mind.
Technical Specifications
| Oscilloscope | |
|---|---|
| Bandwidth | 50MHz, Dual Channel |
| Sampling Rate | 200MSa/s (Normal) / 280MSa/s (High‑Speed) |
| Vertical Sensitivity | 20mV/div – 10V/div (X1 probe) |
| Time Base Range | 10ns/div – 20s/div |
| Input Impedance | 1MΩ ∥ 16pF |
| Max Input Voltage | 150V (X1 probe) / 300V (X10 probe) DC+AC peak |
| Trigger Modes | Auto, Normal, Single |
| Trigger Edge | Rising / Falling |
| Record Length | Up to 128KB |
| Display Modes | Y‑T, X‑Y |
| Persistence | Minimum, 500ms, 1s, 10s, Infinite |
| Multimeter | |
|---|---|
| Display Count | 6000 counts |
| DC Voltage | 60mV – 1000V, ±(0.5%+2) to ±(0.8%+2) |
| AC Voltage | 60mV – 750V, ±(1.0%+3) to ±(1.5%+3), 40Hz–1kHz |
| DC Current | 60mA – 10A, ±(1.2%+2) to ±(2.0%+3) |
| AC Current | 60mA – 10A, ±(1.5%+3) to ±(2.5%+5), 40Hz–1kHz |
| Resistance | 600Ω – 60MΩ, ±(1.0%+2) to ±(1.5%+3) |
| Capacitance | 6nF – 60mF |
| Frequency | 99.99Hz – 30kHz |
| Duty Cycle | 0.1% – 99.9% |
| Diode / Continuity | Yes |
| Signal Generator | |
|---|---|
| Waveforms | Sine, Square, Triangle, Half‑wave, Full‑wave, Sawtooth, DC |
| Amplitude Range | 0.1V – 3V |
| Frequency Range | 1Hz – 2MHz |
| Duty Cycle (Square) | 1% – 100% |
Package Includes
