✅ Ignition coil for Kawasaki ER-6F / ER-6N / KLE650 Versys — match your model and the 2-pin connector before you buy

Ignition Coil for Kawasaki ER-6F 06-16 / ER-6N 06-16 / KLE650 Versys 07-14 — Black ABS, 2-Pin

One coil, measured on the inspection sheet — 131 mm long, Ø 17 mm rubber boot

English factory size card for the ignition coil reading product size 5.16 in by 1.6 in, complete black coil shown full height with dimension lines
AT THE COIL

What you are matching

Three bikes, one coil
For Kawasaki ER-6F 2006-2016, ER-6N 2006-2016 and KLE650 Versys 2007-2014 — the fitment written on the goods record and on the fitment card.
Five reference numbers
129700-4400, 33410-35F10, 129700-4100, 129700-4510, 129700-5350. One of them on your old coil confirms the match.
Black ABS body
Moulded in black ABS, 131 mm long and 41 mm across — the measured outline, within a millimetre.
Two interfaces, both shown
A Ø 17 mm rubber boot with a 9 mm bore at one end, a 16 × 14 mm 2-pin electrical connector at the other. Both are photographed head-on in the detail section.

Close inspection

English factory details card for the ignition coil marking the rubber boot, the 2-pin connector and the barrel
The card that circles the detail
Boot, 2-pin plug and barrel — the details card points at each one on the coil itself.
Ignition coil for Kawasaki ER-6F, ER-6N and KLE650 Versys shown complete on a white background, front aspect
The whole coil, front
Upright on white, top to bottom — the shape your old coil has to match before anything else.
Ignition coil turned to the side on a white background showing the rubber boot collar and the 2-pin connector face
Turned to the side
The second white-background photo turns the coil — the boot collar and the connector face read clearly from this angle.

Where it fits

One line on the fitment card: compatible with Kawasaki ER-6F / ER-6N / KLE-650.

For Kawasaki ER-6F 2006-2016
For Kawasaki ER-6N 2006-2016
For Kawasaki KLE650 Versys 2007-2014
Supplied as one coil with the manual
English factory fitment card reading vehicle fitment, compatible with Kawasaki ER-6F, ER-6N and KLE-650, shown with the motorcycle

Specification

Part type Ignition coil
Fitment for Kawasaki ER-6F 06-16 / ER-6N 06-16 / KLE650 Versys 07-14
Interchange numbers 129700-4400 · 33410-35F10 · 129700-4100 · 129700-4510 · 129700-5350
Material ABS
Colour Black
Dimensions 131 × 41 mm · boot Ø 17 mm (9 mm bore) · connector 16 × 14 mm, 2-pin

Before you order

1

Will it fit my bike?

Three models only: ER-6F 2006-2016, ER-6N 2006-2016, KLE650 Versys 2007-2014. Outside those years, keep looking.

2

How do I confirm the match?

Read the number off your old coil and set it against the five in the table — 129700-4400, 33410-35F10, 129700-4100, 129700-4510, 129700-5350. One agreement is enough.

3

What are the interfaces?

A Ø 17 mm rubber boot with a 9 mm bore over the plug, and a 16 × 14 mm 2-pin connector at the lead end — both photographed in the detail section.

4

What comes with it?

One coil and the manual. Nothing else is claimed.

Fitment questions welcome — send your model, year and the number off your old coil through Contact Seller and we will check it.