✅ Universal caravan & trailer licence plate clip springs, supplied as a pair | No reference number — match your old spring against the 11.8 × 2.5 cm size before ordering

Licence Plate Clip Fixing Springs for Caravans & Trailers — Pack of 2

Universal silver iron replacement springs, 11.8 × 2.5 × 2.0 cm — the part that stops a trailer plate rattling loose

Two licence plate clip fixing springs for caravans and trailers, silver iron, shown from two angles on a white background
THE PLATE STAYS PUT

Why these springs

The part plates lose
On caravan and trailer licence plate clips, the spring is the first part to go — it rusts, fatigues or simply drops out on a rough tow, and the plate follows soon after. These are like-for-like replacement springs for exactly that job, so a flapping plate is a five-minute fix instead of a roadside hunt.
Iron build, silver finish
Each spring is formed from iron with a silver finish and measures 11.8 × 2.5 × 2.0 cm — the gauge of wire and the coil shape are what give the clip its grip, and they are matched to the clips these springs were tooled for.
Grip that holds the plate
A tired spring lets the plate rattle in the holder until the retainer works loose. A fresh pair keeps the clip tensioned, holding the plate firmly through vibration, rain and the wash bay — quietly doing the job the old one has forgotten how to do.
Two springs, one stop
Clips hold a plate with a spring at each end, so one worn spring means the other is close behind. The pair covers both sides of the clip in a single order, with a spare on hand the next time one goes missing.

What the photos show

Two licence plate clip fixing springs photographed front and back on a white background, showing coil, retainer legs and fixing eyes
Both faces, nothing hidden
The studio pair shows each spring front and back — the coil, the retainer legs and the fixing eyes — so you can compare the shape against the spring in your own clip before ordering.
Close-up white-background view of the licence plate clip fixing springs showing wire gauge, coil spacing and fixing holes
The coil up close
The close-up view shows the wire gauge and the coil spacing — the two measurements that decide how firmly the clip grips. Compare them with your old spring; if the wire or the coil count differs, measure before ordering.

The numbers to check first

There is no reference number on a part like this — the tape measure does the talking. The annotated photo below marks the two dimensions that matter; compare them with the spring still sitting in (or freshly fallen out of) your clip before you buy.

Length: 11.8 cm overall
Width: 2.5 cm across the spring
Depth: 2.0 cm
Supplied as: 2 springs
Fits: universal — for caravan & trailer licence plate clips with a matching spring size
Licence plate clip fixing spring with annotated dimensions of 12 cm length and 2.5 cm width on a white background

Specification

Part type Licence plate clip fixing springs, pack of 2
Fitment Universal — caravan & trailer licence plate clips with a matching spring size
Material Iron
Colour Silver
Fitting position Inside the licence plate clip, tensioning the plate retainer

Before you order

1

Will these fit my licence plate clip?

They are universal, not tied to one clip model — the size decides. Check the overall length of 11.8 cm and the 2.5 cm width against the spring in your clip, and compare the coil shape with the studio photos. If your old spring is noticeably shorter or longer, these will not be the right ones.

2

There's no reference number — how do I confirm the match?

Measure the old spring: 11.8 cm long, 2.5 cm wide, 2.0 cm deep, with the coil and legs as photographed. A spring that matches all four is the spring in the photos. Still unsure? Message us the measurements and we will confirm before you order.

3

Is the photo of the actual item?

Yes. The photographs show the exact springs we supply — the studio views, the open-and-closed pair and the annotated size panel are all of the same two springs, supplied as a pair.

4

How many do I need?

A clip tensions the plate with a spring at each end, so a full refresh takes two — which is exactly what this pack supplies. If only one side is worn, fit both anyway; the untouched spring is rarely far behind.

Thank you for viewing. Fitment questions are welcome before ordering — message us via Contact Seller with the measurements from your old spring, and we will confirm the match.