
The LGND Helix™ Counter enables precise dosing of CO₂ in aquariums with increased CO₂ requirements. Large CO₂ bubbles rise in a spiral, making it easy to read the number of bubbles per second. A separate non-return valve is included and provides reliable protection against backflow.
The LGND Helix™ Counter is used in combination with the LGND Rhapsody™ CO₂ Glass Diffuser and LGND Bloom Large, and is particularly suitable for larger aquariums. The functional and aesthetic design blends harmoniously into different furnishing concepts and ensures effective control of the CO₂ supply.

Filling and Installation
Installation order
It is recommended to use suitable soft hoses for connecting glassware. Soft hoses reduce the risk of glass breakage when connecting. The piece of tubing used should be kept as short as possible to avoid unnecessary CO₂ losses.

A: It shows how much CO₂ is flowing into your aquarium. The CO₂ rises through the water in a spiral, which keeps each bubble visible for longer and makes the bubbles per second easy to count, even at the higher supply rates used in larger aquariums.
A: The Helix™ Counter is designed to be used with the LGND Rhapsody™ CO₂ Glass Diffuser and LGND Bloom Large, and is particularly suitable for larger aquariums.
A: Pour in a small amount of water or LGND CO₂ Bubble Counter Liquid™. The easiest way is to briefly submerge the bubble counter in aquarium water. Then mount it vertically on the outside of the aquarium using the suction cups.
A: For a newly established standard 90 cm aquarium, start with approximately one bubble per second and increase gradually according to plant growth. The supply is generally adequate when oxygen bubbles become visible on the plant leaves. For more accurate monitoring, use an LGND Iris™ CO₂ Drop Checker.
A: Fit the check valve close to the bubble counter, at the lower inlet. Connect the pressure-resistant CO₂ tubing to the side marked “IN”, and do not install the valve too low in relation to the aquarium, as excessive water pressure may stop it working correctly.
A: The supplied plastic one-way valve is a consumable part. Inspect it regularly and replace it approximately once a year. Signs of a worn valve include an unstable CO₂ supply, a cylinder that empties faster than usual, or water flowing back into the tubing. The LGND Cameo Rose™ Check Valve does not require periodic replacement.
A: Always use soft hoses to connect glassware. Pressure-resistant tubing must not be connected directly to the glass. Keep the tubing lengths as short as possible to avoid unnecessary CO₂ losses.
A: No. Never inject CO₂ while the aquarium lighting is switched off, as fish and other aquatic organisms may suffocate. A solenoid valve on a timer makes this easy to manage.
A: Make a diluted solution of LGND Hades, the special detergent for glassware, in an LGND Clean Bottle and soak the bubble counter in it, following the LGND Hades instructions. Rinse thoroughly with clean water afterwards. Never use boiling water, as sudden temperature changes may cause the glass to break.
A: Support the glass body close to the suction cups and pull each cup away perpendicular to the glass tube. Never pull or move a suction cup sideways, as this may damage or break the bubble counter.
Important Safety Instructions