













120W Under Canopy LED Grow Light Bars, Full Spectrum Dimmable Supplemental
Side Lighting for Grow Tent, Vertical Farming & Cultivation Rack
Main top grow lights always struggle to deliver enough light to inner canopy, lower leaves and bottom bud sites, which easily causes uneven growth, small buds and yield loss. Our 120W under canopy LED grow light is specially developed as supplementary side & under-canopy lighting to solve this pain point. It fills shaded dead zones that primary grow lights cannot reach, lets middle and lower foliage receive sufficient photons, boosts photosynthesis evenly across the whole plant, and effectively improves harvest weight and crop quality.

Low Power Draw, Max PAR Output for Indoor Grow Tent, Commercial Greenhouse Hydroponics

| CTLite SE1500 LED Grow Light (with Driver) | 1 pc |
| 3M Glue (QS-120) | 4 pcs |
| 1.8M Power Cable | 1 pc |
| 3M Long RJ11 Signal Cable | 1 pc |
| 1M Connect Cable Lines (QS-120) | 4 pcs |
| 15cm Ribbon / Zip Ties (QS-120) | 9 pcs |
Install tip: Use the included nylon zip ties to mount bars on tent poles, trellis frames, or vertical farm supports. Keep the bar ≥6" above the lower canopy when used as under-canopy lighting. Route the external driver outside the grow area.
Installation is super simple. Secure the light bars on tent poles, racks or frames with nylon cable ties. You can move the side lights vertically anytime as you need. Flexible mounting options make it widely compatible with grow tents, cultivation racks and vertical farming systems. You can use it together with main grow lights as fill light, or build multi-layer lighting setups to maximize planting space and crop output.
Whether you are a home hobby gardener or a commercial indoor grower, this 120W under canopy supplemental grow light is a cost-effective upgrade to optimize your lighting layout and get bigger, denser harvests.

Install along the sides of a 3x3 or larger tent to improve light penetration into the lower canopy.
Helps reduce shaded dead zones without requiring excessive leaf removal.
Low-profile bar design fits well in tight vertical spaces.
Suitable for growers who want more uniform bud development and better use of existing top lights.

Under Canopy 2-Bar Design LED Revolution
Works as a side-fill / under-canopy supplement to help lower nodes receive more usable light instead of relying only on top lighting.
Built with 528 high-efficiency LM281B LEDs, including 3000K, 5000K, 660nm red, and 450nm blue, supporting seedling, vegetative, and flowering stages.
Adjust brightness for different growth stages and canopy density. Dimming helps prevent light stress on delicate lower tissue while keeping PPFD more stable.
Supports daisy-chaining with extension cables, so multiple bars can be arranged along tent poles, trellis frames, or vertical farming racks.
LED bar design with an external driver helps reduce heat buildup inside the grow space, allowing closer placement to lower canopy when needed.
Can be mounted with zip ties or hanging accessories on grow tent poles, trellis nets, shelving systems, and vertical farm structures.

| Model | CTLite SE1500 |
| Actual Draw Power | 120W (55% Enegy Saving Than HPS/MH ) |
| Spectrum | Full Spectrum (3000K / 5000K / 660nm Red + 450nm Blue) |
| Cooling System | Fanless Passive Cooling, Thickened Aluminum Heat Sink |
| Control Function | 0-100% Dimmable, RJ Daisy Chain, Master-Slave Sync Control |
| Under Canopy Bar Design | External Light Bar, External Driver Get the lower Heat, 30% Cooler than others |
| Power Driver | The power supply is removable, which can not only be disassembled freely to get the heat lower |
| Safety Certifications | UL,FCC,CE, RoHS, ETL & 3 Year Warranty |
| Optimal Coverage Area | 2x4ft/3x3ft Grow Tent / Greenhouse |
| Voltage | AC 100-277V (Compatible with USA & Australia Power Grid) |
| Package Contents | Grow Light, Adjustable Hanging Ropes, RJ Daisy Chain Cable, User Manual |


Sub-Canopy Side Fill | 528pcs LM281B | Daisy-Chain Dimming | 3x3 Flower
1. Purpose-Built Sub-Canopy Fill Lighting
Designed as inter-canopy and lower-canopy fill light to solve the shading problem caused by thick top canopy. Unlike overhead main lights that only cover upper foliage, this 23" bar penetrates deep into dense canopy to deliver targeted photons to inner leaves, lower nodes and hidden bud sites — reducing larf, balancing whole-plant photosynthesis and improving overall harvest quality.
2. Wide 2-Bar Form for Even, Broad Coverage
The 2-Bar design spreads light evenly across the canopy, maximizing grow space and making it ideal for high-PPFD cultivation in single or multi-tier racking. Perfect for 3'×3' veg and 2'×4' flower stages, with up to 30% higher intensity than comparable blue-red lights.
3. 120W True Output, 2.85 μmol/J Efficiency
Consuming only 120 Watts true output with 528pcs LEDs, it is more scientific and energy-efficient. Newest LM281B LED technology delivers PPFD up to 768 μmol/m²/s at 2.85 μmol/J — the best solution to get more and better-quality fruits with minimal electricity cost.
4. Professionally Tuned Horticulture Full Spectrum
528pcs upgraded LM281B lamp beads (3000K, 5000K, 660nm and 450nm). Adequate, sun-like light prevents spindly, moulding growth. The best lighting solution for indoor hydroponics and soil cultivation — potatoes, peppers, tomatoes and more — suitable for all plants through seed, veg, flower and harvest.
5. Daisy-Chain Dimming for Up to 50 Lights
A dimming knob adjusts intensity for different growth stages, while the daisy-chain function lets you connect up to 50 LED grow lamps and dim them simultaneously — synchronized intensity across your entire under-canopy layout.
6. 3.3FT Extension Cables for Grow Tent Setup
Comes with 3.3ft extension cords for daisy-chaining multiple under-canopy bars. The external power supply can be routed outside the grow tent, keeping your canopy zone clean, reducing heat buildup inside the tent and simplifying side-by-side inter-canopy lighting layouts.
7. Low Radiant Heat with External Driver
The LED bar design with an external driver helps reduce heat buildup inside the grow space, allowing closer placement to the lower canopy when needed — and stable long-hour operation without raising tent temperature.
8. Flexible Low-Profile Mounting for Vertical Farming
Mount with zip ties or hanging accessories on grow tent poles, trellis nets, shelving systems, cultivation racks and vertical farm structures. The low-profile bar fits tight vertical spaces and can be moved vertically anytime as your canopy grows.
9. Optimized Beam Angle for Uniform Canopy Profile
An optimized beam angle spreads even supplemental light across shadowed dead zones missed by top grow lamps. Great for growers chasing a flat, uniform canopy — pair it with your primary top light to unlock the full yield potential of your grow tent, indoor room or vertical farming system.
10. Lightweight Aluminum Body, IP65, Silent Cooling
528pcs LEDs in a 2.0kg lightweight aluminum design — compact yet powerful, with IP65 waterproof protection and silent fanless cooling. The External power supply is easily removable for storage, with adjustable height for flexible setups.


WHY CHOOSE CTLite GROW LIGHT BAR?
💪Fully assembled, industrial grade construction and durability ,
covering full PAR (380-730nm) promotes photosynthesis for Growth & Bloomming,
💪Optimized spectrum for all phases of plant growth and production
💪High performance aluminum alloy light bar, Fast heat dissipation, Uniform illumination, lifespan up to 50000 hours.
💪Scientifically engineered spectrum to maximize photosynthesis, growth, and yield
💪40% less energy consumed and heat generated to produce an equivalent amount of delivered PAR than 1000W HPS
💪Superior delivered PAR output and PAR photon efficacy than 1000W HPS
💪Passive cooling design eliminates inferior features such as fans, moving parts, and noise
💪14 years experienced R&D team,rich experience in OEM/ODM.
💪Truly Full Spectrum~Suitable for all Grow Stages from Seeds to Harvest~1w>2.7grams(Max)
💪Sustainable and environmentally friendly mercury-free lighting source compared to traditional technologies (HID and fluorescent) requiring hazardous waste disposal
💪Adjustable LED panels allowing for more focused or more diffuse lighting distribution over the plant canopy
💪Applications: Indoor crop production, greenhouses, growth chambers, retro-fit existing HID or new construction controlled environment grow facilities.

How growers across the US and Australia are thriving with the CTLite SE1500 — Full Spectrum · 2.85 µmol/J · IP67 · 3-Year Warranty
"I grow veggies year-round on my balcony. The SE1500's silent operation and 2x4ft coverage are perfect. The daisy chain lets me add lights as my garden expands — no more noisy fans!"
🔑 0 dB · 2x4ft · Daisy Chain
"Energy costs kill profits. The SE1500's 2.85 µmol/J efficiency slashed our bills by 30%. IP65 waterproofing withstands Aussie humidity, and 50,000-hour lifespan saves replacements."
🔑 2.85 µmol/J · IP65 · 50,000H
"Discreet growing requires quiet tech. The fanless design and dimmable modes let me optimize light cycles without noise. Full spectrum ensures dense buds every harvest."
🔑 Fanless · Dimmable · Full Spectrum
"My orchids thrive under the SE1500's 660nm Red & 450nm blue -rich spectrum. The External power supply makes cleaning a breeze, and IP65 waterproofing handles unexpected rain."
🔑660nm Red & 450nm-Rich · External Driver · IP65
"We run 50 SE1500 lights on daisy chain. The master-slave dimming saves us hours of manual adjustments. 2.0kg weight makes re-hanging effortless between harvests."
🔑 Daisy Chain 50 · Master-Slave · 2.0kg
"I hang the light on my patio with the included adjustable lanyard. 50,000-hour lifespan means I won't replace it for decades. My tomatoes love the full spectrum!"
🔑 Adjustable Lanyard · 50,000H · Full Spectrum
🏆 Why Growers Love CTLite SE1500:
2.85 µmol/J · 768 PPFD · 2x4ft Veg / 3x3ft Flower · 0 dB Silent · IP67 · Daisy Chain 50 · External Driver · 50,000H · 3-Year Warranty
⚡ Voltage: US — 120V plug & play. AU — 120V version available. Compatible 120-277V AC.
🔍 SEO: SE1500 grow light · 2.85 µmol/J · 768 PPFD · 3x3 grow light · IP67 waterproof · daisy chain · ETL certified · fanless silent · full spectrum · External driver · 3-year warranty · USA · Australia
CTLite — Professional grow lights for US & AU gardeners.
Ready to write your own success story? Message us — we're real growers. 🌱


🌱 6 Real Grow Scenarios | ⚡ Sub-Canopy Side Fill | 🔗 Daisy Chain
Every grow space has a “light dead zone.” The SE1500 was designed to fill it. Below are six real setups where under-canopy supplementation changes the outcome — not theory, but the scenarios growers ask us about most.
GROW TENT SIDE LIGHTING · 3x3 TENT · LOWER CANOPY FILL
You run a 400–600W overhead LED in a 3x3 tent. Top colas look great. But when you pull the plants out at harvest, the bottom third is pale, airy, and barely worth trimming. The SE1500 mounts vertically along the tent poles at 6–12 inches above the lower canopy, pushing PAR photons directly into the shaded middle and lower nodes. One bar covers the underside of a standard 3x3 bed; two bars on opposite poles give you full side-fill coverage. This is the single most common use case for home growers who want denser lower buds without upgrading their main light.
DENSE CANOPY · DEFOLIATION · LARF REDUCTION · BUD UNIFORMITY
You’ve defoliated aggressively. Light still doesn’t reach the inner nodes. Research from Fluence shows that in high-density setups where plants are tightly packed, sub-canopy lighting is more effective than inter-canopy lights because it illuminates the entire underside of the canopy rather than fighting through foliage. The SE1500’s 23-inch slim bar slides into tight spaces between rows, delivering light upward to the lower bud sites you’ve worked hard to expose. Growers chasing a flat, uniform canopy profile use this to reduce C-grade buds and increase A/B-grade yield.
VERTICAL FARMING · MULTI-LAYER RACKS · CULTIVATION RACKS · TIERED GROWING
In a multi-tier vertical rack, the top light on each shelf only reaches the upper portion of the plants below it. The lower tier’s canopy gets progressively weaker light as you go down. The SE1500’s low-profile 23×23” design and 2.0kg aluminum body let you mount one bar per tier with zip ties — no drilling, no rack modification. The external driver routes outside the rack, keeping heat out of the grow zone. This is the setup commercial micro-farms and serious vertical growers ask for: even PPFD on every tier, not just the top shelf.
HPS REPLACEMENT · LED UPGRADE · COMMERCIAL INDOOR GROW · LOWER NODE DEVELOPMENT
You switched from 1000W HPS to a modern LED bar. Top yields are fine. But the lower canopy got worse — LED bars are more directional than HPS, so less light scatters downward. The SE1500 is the fix. At 120W true output with 400W HPS-equivalent intensity, it fills the lower zone your new LED doesn’t reach. Pair it with your existing timer and controller; the knob dimmer lets you dial intensity to match your main light’s schedule without overdriving delicate lower tissue.
COMMERCIAL GROW · TABLE ROWS · BENCH LIGHTING · STANDARDIZED HARVEST
North American commercial growers running four-foot-wide tables with rows of plants are the exact profile Fluence studied. Their controlled research found sub-canopy lighting produced a consistent 7.1% yield increase across multiple cultivars compared to inter-canopy approaches. The real financial win isn’t just weight — it’s standardization. When lower sites get adequate light, you get fewer variables at harvest, more consistent chemical profiles, and a product that grades uniformly. The SE1500’s daisy-chain dimming supports up to 25 lights on one controller, making it practical to outfit an entire table row at once.
HOME GROWER · INDOOR GARDEN · SIDE LIGHTING · BUDGET UPGRADE · GROW TENT ACCESSORIES
You spent your budget on a solid overhead light. You’re not replacing it. You just want more from the plants you already have. This is the SE1500’s sweet spot. Hang it on your tent poles with the included zip ties, set the knob dimmer to a low setting during veg, and turn it up as flowering progresses. No controller needed. No rewiring. No new tent. The bar adds usable PAR to the lower half of your canopy for a fraction of what a second main light would cost. The 3.3ft extension cables and RJ11 signal line are in the box — you can daisy-chain two bars on opposite sides of a 3x3 without buying anything extra.
eBay & Google search terms this listing targets:
under canopy grow light | sub canopy lighting | side fill grow light | 120W LED grow light bar | grow tent side lighting | vertical farming LED | multi-tier rack grow light | daisy chain grow light | full spectrum LED bar | LM281B grow light | commercial grow light supplement | lower canopy lighting | HPS replacement LED | 3x3 grow tent light
Social media tags growers use (for your own posts & discovery):
#UnderCanopyLighting #SubCanopyLight #GrowTentSetup #IndoorGrow #LEDGrowLight #VerticalFarming #GrowRoom #CannabisCultivation #HomeGrown #GrowLightBar #DenseCanopy #LarfReduction #GrowersOfInstagram #IndoorFarming #PlantLighting
CTLite — Professional grow lights for US & AU home gardeners.
Questions? Message us — we're real growers, not robots. 🌱

We can do whatever we can to ensure that interests of consumers


Everything US & AU Growers Ask Before Buying the SE1500
❓ Q1: Is this CTLite SE1500 a main grow light or under canopy supplemental fill light?
✅ A: This is a dedicated 120W under canopy grow light / sub canopy fill light, designed as inter canopy supplemental lighting to pair with your overhead main grow light, NOT a primary top light. It delivers targeted PAR to hidden lower bud sites and inner foliage, reduces larf, fixes shadow dead zones created by dense canopy and balances whole-plant PPFD distribution.
❓ Q2: What is the actual power draw of this 120W under canopy light? Is the HPS equivalent 400W?
✅ A: Rated power draw is 120W ±5%. It is rated for 400W HPS equivalent performance thanks to high-efficiency 528pcs LM281B LED chips. Low power consumption makes it ideal for US & AU growers with strict electrical load limits on multiple veg tents and flower rooms.
❓ Q3: Does this under canopy grow light work for both USA 120V and Australia 120V power supply?
✅ A: Yes! Wide input voltage 100–120V AC, 50/60Hz. It works directly for standard US household 120V circuits and Australian 120V hydroponic setups. It comes with a UL-certified external dimmable driver for stable and safe operation.
❓ Q4: Can I dim this sub canopy fill light and use it with timers or controllers?
✅ A: Absolutely. Equipped with a smooth knob stepless dimmer, you can tune brightness from 0–100% for seedlings, veg and late bloom stages. It is timer-compatible, so you can build stable photoperiod cycles and avoid photoinhibition or light burn on sensitive lower canopy tissue.
❓ Q5: What is the recommended coverage footprint for veg and flower?
✅ A:Veg footprint: 3ft × 3ft; Flower footprint: 2ft × 2ft. Optimized beam angle spreads even sub-canopy supplemental light to shaded zones. Multiple units can be deployed for large flower rooms, vertical farming racks and SCROG tents to get uniform canopy profile.
❓ Q6: What is the minimum mounting height above canopy for this inter canopy lighting?
✅ A: We recommend mounting at ≥6 inches above canopy. The low-heat LM281B design allows close placement without raising tent ambient temperature. Always watch your plant response and adjust height if you see signs of light stress.
❓ Q7: Can I daisy-chain multiple CTLite SE1500 under canopy lights together?
✅ A: Yes, daisy-chain ready! It includes RJ11 signal cable and 3.3ft extension cables for linking several sub canopy fill lights. You can place the external driver outside your grow tent for cleaner wiring and less heat buildup inside the canopy area.
❓ Q8: What spectrum does this under canopy LED grow light use, suitable from seed to flower?
✅ A:Full spectrum 380nm–780nm, mixed with 3000K, 5000K white, 660nm deep red and 450nm blue, built with 528pcs premium LM281B diodes. The calibrated horticulture spectrum supports seamless growth from seedling, clone, vegetative stretch all the way through bloom and flowering.
❓ Q9: How is the heat performance on this 120W under canopy light?
✅ A: It runs cool with an aluminum shell for efficient heat dissipation and low radiant heat output. Unlike hot HPS lights, this LM281B under canopy fill light will not spike tent temperature or overload your HVAC — a huge advantage for commercial vertical farming and multi-tent growers.
❓ Q10: Can I use this light to replace my old Spider Farmer sub canopy fill lights in my 180×120cm tent?
✅ A: Yes, it works great as a retrofit lighting upgrade. Many US and AU growers swap older sub canopy lights to this CTLite SE1500. It offers stable PPFD, stepless dimming and daisy-chain function while keeping low wattage draw — perfect if you need tight power-load management in your existing tent layout.
❓ Q11: What growing setups are compatible with this sub canopy supplemental light?
✅ A: It fits nearly all indoor cultivation: SCROG grow tents, vertical farming multi-tier racks, seedling & veg propagation tents, large flower rooms, closet hobby grows and hydroponic systems. Fast mounting with included 3M adhesive pads and ribbon ties on tent poles, trellises and rack frames.
❓ Q12: What is the service lifespan of the LM281B LEDs on this under canopy grow light?
✅ A: The high-quality LM281B LED array has a long rated service life up to 50,000 hours. Combined with a reliable UL external driver and durable aluminum housing, it delivers consistent long-run performance for both hobby growers and commercial indoor cultivators.
Still have questions about your setup?
Send us a message with your tent size, main light wattage and number of plants — we'll help you calculate how many SE1500 bars you need.
⚡ Important — US & AU Buyers: US — 110V plug & play. AU — 120V plug & play.
🔍 SEO Keywords: 120W grow light · Under Canopy LED grow light · dimmable grow light · daisy chain grow light · master slave control · ETL certified grow light · IP65 waterproof grow light · full spectrum grow light · 2x4/3x3ft grow tent light · passive cooling LED · quiet grow light · 3 year warranty grow light
CTLite — Professional grow lights for US & AU home gardeners.
Questions? Message us — we're real growers, not robots. 🌱







CTLite has been developed by growers over Ten years of careful experimentation and testing. We mainly produce the led grow light and Hydroponics accessories in Agricultural Greenhouses help indoor and outdoor plants growing. Scientifically engineered to deliver the highest level of PAR output and balanced Coverage in the Commercial LED grow market.
CTLite LED Grow Lights are built with high quality LM281B/LM301B diodes and cobs Chips. The lights encompass a continuous range of wavelength from blue and green to red, creating a Full spectrum light blend matching the natural sunlight.
CTLite customized our light spectrum to optimize plant growth and increase yields while consuming less energy and reducing operating costs compared with traditional horticulture technologies.
Higher Light Intensity, Better Coverage, More advanced features ( dimmer and wifi control
US,EU,AU,DE Local warehouses for fast shipment.95% of the goods are in 4-8 days Fast Delivery


CTLite are committed to designing, developing, and manufacturing high quality led grow lighting solutions, for both
home growing and commercial applications where reliability and precision are a key factor.
Each product has undergone 24 hours of quality testing and integrating sphere spectroscopic testing instrument to
ensure the quality and PPFD value.
We have professional market sales and after-sales service center, to give you the most convenient and comfortable
shopping experience.lf you have any question, please feel free to contact us. We will reply you within 24 hours.



CERTIFICATIONS:
CE FCC and RoHS – Certifies that a product has met US/AU/EU consumer safety, health or environmental requirements
ETL UL and ISO90001 Listed – The ETL UL and ISO90001 Mark is proof of product compliance with North American Safety Standards, also it compliance with AU/EU Safety Standards

US,EU,AU,DE Local Warehouses for Fast Discreet Shipment.
95% of the goods are in 4-8 days Fast Delivery
















If your tracking number shows delivered on the shipping company’s website but you don’t have it, please do the following:
• Check the area around your home for the package and ask anyone it may have been left with.
• If the package is not found please call the shipping company’s directly to report a missing package. so you can get the logistics information fastest.
• Pls email us about it at the same time.
CTLite can not be held responsible for packages stolen from the delivery address
so please be sure to ship to a secure location! If the items are lost, we need at least 30 days to investigate.
so after we provide the tracking number, hope you can follow the dynamics of the logistics of the items,
continue to view our mail about the notification, so you will receive the items successfully.

CTLite believes in making great planting lights for our customers. We follow strict development guidelines and quality standards and we fully stand behind our products. CTLite Official Store values transparency and building good relationships with our valued customers. As a result of this, we employ no questions asked warranty policy for all our customers. We offer a 3-year extended warranty on every grow light we sell. If you ever do have any issue with your light we will resolve it quickly with our unbeatable customer service. Buy with confidence, buy CTLite.
30 days free returning after delivery, in the precondition of non-artificial damage.
If the reason for return isn’t quality-related, the customer must pay the return shipping costs.
6 months ALL FREE warranty:
Free components, repairing and replacement service with 2-way free shipping can be provided within 6 months after delivery.
7 months to 3 years after delivery:
Free components. Buyer needs to pay shipping fees and reparing fees.
For the lights couldn't be repaired, a whole new light would be send out after charging 50% of the retail price.
Before you make any returns or warranty requests, send your order number, a photo or video of the faulty product,
and a description of the faulty product to contact us via the form below, our engineers will assist you.
Don't love your new CTLite LED grow light? Before you make the decision to return, feel free to reach out to us by email for a complimentary consultation and we will do our best to help you out with any concerns or questions.
We accept order cancellation before the product is shipped or produced. If the order is canceled you will get a full refund. We cannot cancel the order if the product is already shipped out.
If you wish to return a product, please contact us to get the return label,and we will be pleased to provide you with a full or partial refund based on the product condition when returned to us, and subject to the other terms and conditions.
Before returning any product or proceeding to initiate a product return, please review the following return/refund terms and conditions below, which set out the different refund and return details.
Eligibility of the return of planting lights is based on the following criteria:
Return Validity
Up to 30 days from the date you received your item. The delivery date will be based on our tracking records.
If 30 days have gone by since your purchase, unfortunately, we can’t offer you a refund or exchange.
Return Packaging
Product/s must be returned in the ORIGINAL PACKAGING.
Shipping
If the return is caused by the consumer, the consumer should be responsible for the shipping fee. If you receive a refund, the cost of return shipping will be deducted from your refund. And it is your responsibility that the package arrives safely to us. (Do note that you are responsible for any damage or loss of goods during the return process. We encourage you to pay for shipping insurance to cover such damage and loss. You are responsible for any insurance claim filing with the carriers.)
If due to our reasons, the goods received are damaged or not correct, the consumer is not required to bear the shipping fee for this reason.
Refund will be initiated within 3-5 business days of us receiving the product and after inspection. Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 3-5 business days.
We reserve the right to give a partial refund in cases when the return is not in an unused condition, is damaged, or has missing parts not due to our error (If the return is caused by the consumer).
We will not accept returns in the following conditions:
Items outside the 30 days warranty time frame.
Used or misused items.
If you still return it, the return shipping fees should be at buyer's responsibility, and we'll charge based on the product condition.

CTLite Technology Co., Ltd. is a professional manufacturer that specializing in research, design,
production and sales of LED lighting products with years of experience in the field.
The main products include high-end programmable LED grow lights, LED aquarium lights with RoHS,
FCC and CE certification.
-Pursuing excellence product, meeting or exceeding your expectations.
-Establish long-term and reliable cooperative relationships with you.



Q1:Can you send me free sample or Can I have a sample order for grow tent?
A: Yes, We welcome your sample order, and we’re also willing to send you free sample to help us test and check quality. You only need to show your real grow journal to help our other customers to know more about it.
Q2: How many days can I get my package after placing order?
A: we arrange shipment in 24 business hours with 3-5 business days fast shipping method if stock is enough. If the area needs to be shipped from China, usually the shipping will take 7~10 business days, considering the custom clearance time.
Q3: Can I cutomize my own Logo/Design/Spectrum?
A: Yes, you can, please email us or contact us via platform to confirm more details
Q4:we have a commercial project,Can you help offer a solution
A:Yes,please message us more detail of your project,we will give our best advice.
Q5:What is your warranty?
A: We offer 2-5 years warranty for all our led grow lights, while grow tents are final sale upon usage. We have repair center in
USA, Canada, AU, UK, Germany,Russia. We will reply within 24 business hours.
Q6: What shipping methods do you use?
A: AU Post or Direct Freight for shipments within Australia, UPS and Fedex for shipments within United States, Yodel for the United Kingdom, etc. As to international shipping from China, the lights will be shipped via Fedex, UPS, DHL, EMS, etc. If you would like to specify a shipping method or carrier, please let us know and we will do our best to arrange it for you.
Q7.What's the difference between your CTLite grow light bar and flu spyd light,or other brands ?
1). CTLite lights has more color and wavelength lights-3000K,5000K,660nm Red and IR 760nm All in One. You don’t need to buy more
lights for different color or wavelength. CTLite multiple bar series light will save you a big budget.
2). 100% pure aluminum material heat radiation,and CTLite use UV Protection pc cover, prevent the diodes from corrosion and
vulcanization in humid environment. This makes CTLite lights have a far longer lifetime than other brand lights.
3). For user’s safety, CTLite use electric shock proof covers on every connections.
4)CTLite use the driver with UL certificats ,the whole light with ETL.
5). CTLite is more friendly on the price, will save your money.
Q8.What brand of the Leds?
High Efficiency 5630 561b plus ,lm561c,lm301b,301h and smd2835,depend on customers requirements.
Q9.Can you daisy chain these lights?
Yes ,usually used in the projects,need to change cables.
Q9. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q10. Do you offer guarantee for the products?
A: Yes, we offer 3-5 years warranty to our products.
Q11. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design
firstly based on our sample.
Q11: Do you offer guarantee for the products?
A: Yes, we offer 3-5 years warranty to our products.
Q12: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will
be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we
will send you parts for replacement, as solo is very easy to fix, and all you need is a screw driver.
Q13. Do you have CE, RoHS FCC ETL Certificates?
A: Sure we do
Q14. What payment method do you accept?
A: We accept PayPal, TT (Bank Telex Transfer), payoneer payment, LC payment.



