🛠️ Application Areas and Target Audience
Repair and maintenance: Quick troubleshooting on electronic devices
Research and development: Measurement and analysis of circuit signals
Education and study: Ideal for teaching purposes and practical exercises
Hobby and DIY: For electronics enthusiasts and makers
Mobile use: Can be used anywhere thanks to the battery and compact size
 |  |  |  |
| 📡 Compact Handheld Oscilloscope with 500kHz Bandwidth This portable digital oscilloscope offers a real-time sampling rate of 2.5 MS/s and a bandwidth of 500 kHz. It is ideal for measuring periodic analog signals as well as non-periodic digital signals. | ⚡ One-Click AUTO Measurement Thanks to the AUTO function, the waveform is automatically identified, the amplitude and time base are adjusted, and the matching waveform is displayed on the screen — without complex manual adjustments. Note: Frequencies below 45 Hz cannot be set correctly. | 🖥️ 2.8-Inch HD LCD Display The 2.8-inch LCD with 320 × 240 resolution displays waveforms clearly and neatly. Ideal for mobile use and quick on-site measurements. | 🔋 Built-In 400mAh Lithium Battery The built-in 400mAh lithium battery provides approximately 3 hours of continuous use when fully charged. Conveniently charged via USB at 5V/1A. |
🎛️ Versatile Trigger and Coupling Functions
Trigger modes: Auto / Normal / Single
Coupling modes: AC / DC
Edge switching: Rising / Falling edge (by long press)
📏 Wide Measurement Range
X1 mode: ±40 V (Vpp: 80 V)
X10 mode: ±400 V (Vpp: 800 V)
Vertical sensitivity: 10 mV/Div – 20 V/Div (1-2-5 steps)
Time base: 10 µs/Div – 50 s/Div (1-2-5 steps)
🔲 Integrated Calibration Square Wave
A 1 kHz square wave with 50% duty cycle is available for calibration.
📋 Technical Specifications
Sampling rate: 2.5 MS/s
Bandwidth: 500 kHz
Coupling modes: AC / DC
Display: 2.8 inch, 320 × 240 pixels
Vertical sensitivity: 10 mV/Div – 20 V/Div (1-2-5 steps)
Time base: 10 µs/Div – 50 s/Div (1-2-5 steps)
Voltage range: X1: ±40 V (Vpp: 80 V); X10: ±400 V (Vpp: 800 V)
Trigger modes: Auto / Normal / Single
USB charging: 5 V / 1 A
Lithium battery: 400 mAh
Calibration square wave: 1 kHz, 50% duty cycle
📦 Package Contents
