AGILENT TECHNOLOGIES | OPT 130
83430A LIGHTWAVE TRANSMITTER
1310 nm | OPTICAL OUTPUT VERIFIED
PROFESSIONAL FIBER-OPTIC TEST EQUIPMENT
✔ OPTICAL OUTPUT TESTED   |   ✔ BIAS CONTROLS VERIFIED

EXTENSIVELY FUNCTION TESTED

This Agilent 83430A OPT 130 Lightwave Transmitter was tested using an external optical power meter and single-mode fiber-optic cable. The measurements below are actual readings obtained from this unit.

TESTMEASURED OUTPUT
Digital Preset-9.84 dBm
Analog Maximum Bias-0.18 dBm
Analog Minimum Bias-2.24 dBm
Digital Variable Bias Maximum-4.84 dBm

COMPLETED FUNCTIONAL TESTS

✔ Power-On Test

Unit powers on successfully.

✔ Optical Laser Output

Measured optical output through the transmitter's OPTICAL OUT connector using a fiber-optic power meter.

✔ Laser Power On/Off Response

Optical output dropped to the meter's low indication (approximately -50 dBm) when the transmitter was switched off.

✔ Digital DC-Coupled Mode

Selected and verified optical output in digital mode. Preset output measured -9.84 dBm (0.103 mW / 103 µW), close to the manufacturer's -10 dBm reference level.

✔ Digital Variable Bias Control

Optical output increased as the control was adjusted. Intermediate measurement: -6.17 dBm (0.241 mW). Maximum measurement: -4.84 dBm (0.328 mW).

✔ Preset / Variable Bias Switching

Switching back to PRESET restored the original -9.84 dBm reading.

✔ Analog AC-Coupled Output Test

Analog mode was selected and optical output measured. Maximum bias: -0.18 dBm (0.963 mW). Minimum bias: -2.24 dBm (0.597 mW). Both readings were within the stated analog bias endpoint limits.

✔ Front-Panel Controls

SELECT, BIAS ADJUST, and PRESET/VARIABLE controls responded during testing.

EQUIPMENT SPECIFICATIONS

Manufacturer: Agilent Technologies
Model: 83430A
Option: OPT 130
Equipment Type: Lightwave Transmitter
Nominal Wavelength: 1309.4 nm (per unit label)
Input Modes: Analog AC Coupled / Digital AC Coupled / Digital DC Coupled
Rated Digital Capability: Up to 2.5 Gb/s (manufacturer specification)

WHAT'S INCLUDED

ONE AGILENT 83430A LIGHTWAVE TRANSMITTER ONLY.

NOT INCLUDED: Optical power meter, blue fiber-optic cable, external test equipment, or additional accessories. Equipment pictured during testing was used for verification only and is not part of the sale.

TESTING DISCLOSURE

Optical output and bias-control functions were tested as described. High-speed modulation, optical eye quality, frequency response, and actual wavelength accuracy were not independently verified. No current calibration certificate is included. Please review all photographs for cosmetic condition and exact configuration.

ACTUAL OPTICAL POWER MEASUREMENTS DOCUMENTED