Note:
wholesale!!!
Products can be wholesale!!!
If you have any needs, please send us a message to contact us.
wholesale!!!
Products can be wholesale!!!
If you have any needs, please send us a message to contact us.
Information：
a)Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. It will work and fit.Thank you!
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
a)Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. It will work and fit.Thank you!
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
2004 Ford F-150, high/low beam
2015 RAM 1500 with projector-type, high beam
2019 Ford F-150 ,XL Crew Cab Pickup 4-Door 2.7L
2004 Ford F-150, high/low beam
2015 RAM 1500 with projector-type, high beam
2019 Ford F-150 ,XL Crew Cab Pickup 4-Door 2.7L
Description
Headlight bulbs
Lumens:50000LM
Color temperature: 6000K
Voltage: DC9-32V
Light source: Flip COB chip.
Input: 3.2A + 0.2A / 3.2A - 0.2A
50,000 hours service life.
Manufacturer Warranty: 5 Years
-IP68 rated water and dust seal,360 degree beam angle
-Material: Aviation 6063 aluminum profile
-Operating Temperature: -40-80 degree Celsius
Wattage: 100W
Color Temperature: White
Headlight bulbs
Lumens:50000LM
Color temperature: 6000K
Voltage: DC9-32V
Light source: Flip COB chip.
Input: 3.2A + 0.2A / 3.2A - 0.2A
50,000 hours service life.
Manufacturer Warranty: 5 Years
-IP68 rated water and dust seal,360 degree beam angle
-Material: Aviation 6063 aluminum profile
-Operating Temperature: -40-80 degree Celsius
Wattage: 100W
Color Temperature: White
(2pcs/set)H4 COB High-Low Beam LED headlight conversion kit
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
white light reflect road paint/signs better to show clearer road situation during night driving
All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay
Two-way heat dissipation channel
1. All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2. High speed mute fan (12000R/Min),high Air flow for faster cooling rate
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
white light reflect road paint/signs better to show clearer road situation during night driving
All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
Built-in constant current CPU, instant full brightness without start-up relay
Two-way heat dissipation channel
1. All-in-one aluminum profile as heat conduction system, 360 degree heat radiating
2. High speed mute fan (12000R/Min),high Air flow for faster cooling rate
Package Included:
2x H4 LED headlight bulbs
New boxes and old boxes are sent randomly!!!
2x H4 LED headlight bulbs
New boxes and old boxes are sent randomly!!!
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulbs.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulbs.
If you have any questions,
please feel free to contact us,
we are happy to answer them for you.
Hope you will have a good shopping experience~
On Oct 19, 2025 at 03:10:19 PDT, seller added the following information:
On Oct 19, 2025 at 03:17:03 PDT, seller added the following information:
On Feb 3, 2026 at 05:59:34 PST, seller added the following information:
On Nov 2, 2026 at 01:39:12 PST, seller added the following information: