| Includes | 1 serpentine belt + 1 automatic belt tensioner + 1 idler pulley |
|---|---|
| Brand | OE-grade replacement (brand varies by warehouse) |
| Condition | New |
| Warranty | 1 year from purchase |
| US shipping | Free, tracked, from the nearest warehouse |
Tap a photo to see it larger.
Check the compatibility chart on this listing for your year, model and engine. Not sure? Send us your year, make, model and engine, or your VIN, and we'll check it before you buy.
Before eBay, we sold over a counter. The job hasn't changed: get you the right part, the first time, and stand behind it. If a part turns out to be wrong or faulty, message us and we'll sort it out.
The serpentine belt drives the alternator, water pump and A/C compressor. The automatic tensioner keeps that belt at the right tension. When the tensioner spring weakens or its pulley bearing wears, the belt slips, squeals and wears out early, so a new belt on an old tensioner often doesn't last.
This kit replaces both at once: a new serpentine belt and a new automatic tensioner, so the whole drive is fresh and tensioned correctly from day one. We ship from the nearest warehouse with both parts in stock, so the brand may vary. Every belt and tensioner we ship is made to the original specifications and meets OEM tolerances.
Installing: before you remove the old belt, photograph its routing and check it against the belt routing label under the hood or the routing diagram in your vehicle's factory service manual. Rotate the tensioner to release the belt, remove the belt, then unbolt the old tensioner. Fit the new tensioner, route the new belt exactly as the factory diagram shows, release the tensioner slowly onto the belt and check the belt sits centered in every groove. Run the engine and watch the tensioner arm: it should stay steady.
The routing picture in this listing is a simplified illustration for reference only. Pulley positions are approximate. Always follow the belt routing in your vehicle's OEM service manual or on the under-hood label. Installation should be done by a qualified person.
For the 2007-2012 Lexus ES350 with the 3.5L V6 (2GR-FE)
Not for the 4-cylinder engines. The second picture is a simplified routing illustration showing where the tensioner sits; always follow the routing in your OEM service manual or under-hood label. Check the compatibility chart for your trim, or send us your VIN.
| Fits | 2007-2012 Lexus ES350 |
|---|---|
| Engine | 3.5L V6 2GR-FE |
| Engine code | 2GR-FE |
| Chassis code | XV40 |
| In the box | 1 serpentine belt + 1 automatic belt tensioner + 1 idler pulley |
| Belt | 7-rib serpentine belt, OE length |
| Tensioner | Automatic tensioner assembly with pulley |
| Idler pulley | Smooth idler pulley with sealed bearing |
| Condition | New |
Your order ships from the closest warehouse that has every part in stock, so it spends less time on the road. US shipping is free and tracked. The map shows the major warehouses and the cities each one usually serves.
About 80%of the lower 48 states is within 500 miles of one of these warehouses.
Free to any US address, with tracking. International shipping is available for an added cost, shown at checkout.
Handling time and the delivery estimate for your address are in the Shipping section of this listing. Tracking is added to your eBay order when it ships.
Manufacturer defects and functional problems under normal use, for one year from purchase. It doesn't cover misuse, accidents, incorrect installation or unauthorized repairs.
The return window and terms are in the Returns section of this listing. Every purchase is also covered by the eBay Money Back Guarantee.
The compatibility chart on this listing is the place to check. If anything is unclear, message us your VIN and we'll confirm before you buy.
Through eBay checkout, with any payment method eBay offers. eBay adds any sales tax due.
Check the compatibility chart with your full vehicle details: year, make, model, trim and engine. Catalog data can't cover every option package or mid-year change, so if you're unsure, message us your VIN and we'll check it before you buy.
We recommend installation by a qualified technician, following the vehicle manufacturer's service procedures and torque specifications. Damage caused by incorrect installation, such as over-tightening, cross-threading or incorrect adjustment, isn't covered.
Returned parts must be new, unused and uninstalled, in the original packaging with every piece included. A part that has been installed, modified or damaged after delivery can't be accepted unless it has a manufacturer defect.
Message us through eBay with your order number, a short description of the problem and photos. We'll handle the warranty claim and may ask for the part back for inspection.
Our responsibility is limited to replacing or refunding the part. To the extent the law allows, we don't cover labor, installation or removal, diagnosis, towing, rental vehicles, or incidental or consequential damages.
These terms apply alongside eBay's policies. Nothing here limits your rights under the eBay Money Back Guarantee or under the law.