2 IN 1 OBD2 Scanner Features
【6V/12V Battery Tester】
The AD410 Pro can analyze battery health for you in all aspects. Battery test will determine whether or not battery is in excellent operating order.  Cranking test will determine whether or not the electrical system has sufficient power to start the engine. Check to see that the charging current,rectifier diode,generator are all functioning normally. 

【Full OBD2 Functions】
The car code reader can easily access the car's engine to read and clear codes,freeze frames,data streams,DTC LOOKUP,O2 sensor test,onboard monitor test,EVAP test,component test,data recording data printing and vehicle information. 

【Battery Tester Compatibility】
You can easily test and inspect your 6V/12V lead-acid battery with AD410 Pro+.  The SOH (State of Health),SOC (State of Charge),Voltage,Current,Rating,and numerous other understandable analytical data are provided by this battery tester.  It is compatible with regular flooded, AGM flat plate/spiral, EFB, and GEL.  You may test the batteries of a number of vehicles,including cars,motorbikes,trucks,SUVs,boats, yachts,lawnmowers,and even golf carts.

【Full Display Of Real-Time Vehicle Data】
This tools can display real-time vehicle sensor data in both text and graphical formats,allowing you to visualize them more intuitively,such as calculating load values,engine coolant temperature,engine speed,vehicle speed,air flow sensors and more. In addition,you can view freeze frame data and compare it with real-time data and fault codes to better understand what is happening with your vehicle.

【One-click I/M Readiness & DTC Lookup】
We have set up a I/M key on the keyboard,which allows you to quickly obtain readiness status and trouble codes to check if your vehicle can pass the test. Our built-in DTC library provides detailed definitions for over 10W+ codes to help you understand specific engine issues.  Additionally,the car scanner not only supports code definition and lookup,but also features help for trouble codes to provide some guidance for your maintenance needs.

【Extensive Compatibility & Lifetime Free Updates】
This scanning tool is available for most vehicles sold in the US model year 1996 or newer,As well as EU-based vehicles in 2003 and Asia-based or newer vehicles in 2008.  The 10 built-in languages make it even more practical. Free lifetime upgrades with Windows 7/8/10,To keep you informed of the latest diagnostic developments. 

Support OBD Full-Mode Diagnostics
1. Read Codes/ Erase Codes: identifies which section of the emission control system has malfunctioned. erases the codes from the vehicle after certain repairs.
2. I/M Readiness: checks if the various emissions-related systems are ready for the Vehicle Inspection and Maintenance testing or if the repairs has been performed correctly.
3. Data Stream: displays the dynamic data of the data stream items in graphical way, Simpler and easier to understand.
4. View Freeze Frame: records the certain vehicle conditions when an emission-related fault occurs.
5. O2 Sensor Test: monitors and tests operation of the O2 sensors to identify problems that can affect fuel efficiency and vehicle emissions.
6. On-Board Monitor Test: retrieves test results for emission-related powertrain components and systems that are not continuously monitored.
7. EVAP System Test: initiates a leak test for the vehicle’s EVAP system.
8. Vehicle Information: Retrieve vehicle’s Vehicle identification number, calibration ID, and calibration verification number, to know more about your vehicle.
9. DTC LOOKUP: Code reader enables you to view the detailed definition of the retrieved DTC easily, you only need press “I”.

6V 12V Battery Test Functions:
1. Test Result Good, Recharge or Replace
2. Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
Internal resistance value (mΩ) and Life in percentage (%)
3. Cranking system and Charging system
4. Record and re-play battery data.
5. Battery test, cranking test, charging test and other additional functions.
6. The major battery standards CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
Charging Test
Test different parts of charging system,including generator,rectifier,rectifier diode,and so on for a reliable charging volt value
Cranking Test
Analyze the actual cranking voltage and the cranking time to help you quickly figure out the whole state of the starting system
Car Battery Tester Application
Use to test a wide range of 12V batteries (Regular Flooded, AGM Flat Plate , AGM Spiral, GEL, EFB)

Support Languages & Vehicles Coverage:
Support 10 Languages:
English, French, Spanish,German, Russian, Italian,Portuguese, Finnish,Dutch,Polish (10 languages)
 
Vehicles Coverage:
American (USA) Car:
Compatible with Standard OBD2 Cars from 1996 to Now:
Fit For Chrysler, Fit for Ford, Fit for GM, Fit for Jeep

European Car:
Compatible with Standard OBD2 Cars from 2003 to Now:
Fit For Alfa Romeo, Fit for SAAB, Fit for Acura, 
Fit for Opel, Fit for Audi, Fit for Seat, 
Fit for Bentley,Fit for Skoda, Fit for Daewoo, 
Fit for Benz, Fit for Daihatsu, Fit for Land Rover, 
Fit for BMW, Fit for Vauxhall, Fit for Volvo, 
Fit for VW, Fit for Ford, Fit for Jaguar
France Car after 2006:
Fit for Citroen, Fit for Fiat，Fit for Renault，Fit for Peugeot
Not Support for Renault Clio 2/Megane/Dacia Logan,

Japanese Car:
Compatible with Standard OBD2 Cars from 2005 to Now:
Fit for KIA, Fit for Isuzu, Fit for Honda , 
Fit for Mitsubishi, Fit for Hyundai, Fit for Dacia, 
Fit for Lexus, Fit for Mazda, Fit for Nissan, 
Fit for Subaru, Fit for Suzuki, Fit for Toyota

NOTE:
Not Support Russian Cars, Fit for VAZ,Fit for UAZ,Fit for LADA
Not works with Trucks, for Pickups, for Vans

Lifetime Free Update
Support data storage and upload to computer for printing

Product Specification:
Display: 2.8"TFT color display
Operating Voltage: 12V DC
Operating Temperature: 0 to 60°C (32 to 140 F°)
Storage Temperature: -20 to 70°C (-4 to 158 F°)
External Power：8.0 to 18.0 V power provided via vehicle battery
Dimension:12.7x8.24x2.94 cm

Packing list:
1 x  Spark-proof & Reverse Polarity Protection
1 x  12V 16 Pin OBDII Connetor
1 x User manual
1 x USB Cable