eBay

FOUR SCREWS, FOUR CAPS, ONE SOLID SEAL — THE BLEEDER THAT KEEPS AIR OUT AND PEDAL FEEL FIRM

Product Attributes

Colors: Silver

Thread Specifications: M8*1.25

Sizes: 1.10*0.31*0.31 inch

Thread Length: 0.43 inch

Weight: 1.15 oz

Thread Specifications: M7*1.0

Sizes: 1.35*0.27*0.27 inch

Thread Length: 0.58 inch

Weight: 1.12 oz

Thread Specifications: M10*1.0

Sizes: 1.39*0.39*0.39 inch

Thread Length: 0.61 inch

Weight: 2.17 oz

Material: Carbon Steel

Packaging: Brake Bleeder Screws*4, Dust Caps*4

Package Size: 4.57*3.85*0.51 inch

Product Functions & Features

Available in three sizes: M8×1.25–28 mm, M7×1.0–34.5 mm, and M10×1.0–35.4 mm — just measure your old screw before ordering and the fit is straightforward

A dust‑proof cap presses firmly over the bleeder opening to seal the fluid passage against road grit and water, and the integrated connection design keeps the cap from getting lost during service or falling off between brake jobs

Carbon steel holds its shape under repeated tightening and loosening, resisting deformation under high torque and standing up to the heat and pressure of everyday braking

Product Specs: This brake bleeder valve is sized at M8×1.25 with a total length of 28 mm, thread Length 0.42 inch. Before placing your order, please measure the thread diameter and overall length of your original bleeder screw and compare them against these figures to avoid any mismatch during installation
Critical Brake Part: A worn or rusted brake bleeder screw can trap air in the lines and compromise pedal feel. Swapping in a fresh replacement restores a tight seal at the caliper, helping the braking system hold pressure and respond the way it should when you need it most
Dust Cap Seal: Each brake caliper bleeder screw comes with a dust‑proof cap that presses firmly over the bleeder opening. Once seated, it blocks road grit and water from working into the fluid passage, and the integrated connection design keeps the cap from getting lost during service or falling off between brake jobs
Carbon Steel Build: This bleeder screw is machined from carbon steel for solid mechanical strength and hardness. The material handles repeated tightening and loosening without deforming, holding its shape under high torque and standing up to the heat and pressure of everyday braking
4‑Piece Set: This brake bleeder screw kit includes four bleeder screws and four matching dust caps, covering a full caliper refresh with extras to spare. Keep the spares in your toolbox — they are ready whenever a bleeder screw snaps or rounds off during the next brake bleed