Ceramic Repair Agent Epoxy Repair Kit
1:1 Dual Syringe âĸ Waterproof Repair âĸ Ceramic, Porcelain, Bath & Basin
đ§ Ceramic & Surface Repair Kit
Repair chips, cracks, holes and damaged enamel with this convenient
two-part ceramic repair epoxy kit. Designed for DIY repair
projects on a variety of hard surfaces, it is suitable for use around
bathrooms, kitchens, workshops and other suitable areas.
The 1:1 dual-syringe system dispenses both components evenly,
helping make preparation simple without the need for separate measuring.
â Key Features
âī¸ 1:1 Dual Syringe
Dual-component syringe dispenses the two parts in a 1:1 ratio
for convenient preparation and application.
đ§ Water-Resistant Repair
Suitable for repair projects involving wet-area fixtures and surfaces when
properly prepared and cured according to the instructions.
⨠Smooth Finish
Apply and smooth the repair area before curing to create a neat finish.
The repaired area can be lightly sanded after curing if required.
đ ī¸ DIY Friendly
The kit includes the main application accessories needed for straightforward
DIY repair work.
đ Suitable Surfaces & Uses
| Ceramic |
Porcelain |
Fiberglass |
| Acrylic |
Metal |
Stone |
| Concrete |
Bathtubs |
Basins & Sinks |
| Toilets |
Tiles |
Other Suitable Surfaces |
đĻ Complete Repair Kit
- 1 Ã Dual Syringe (A+B, 1:1)
- 1 Ã Mixing Tool
- 1 Ã Applicator / Scraper
- 1 Ã Instruction Manual
No additional mixing tools are required for the supplied kit.
đ ī¸ How to Use
â Clean
Lightly sand the damaged area, remove dirt and oil, clean with alcohol and allow the surface to dry completely.
⥠Dispense
Press the dual-syringe plunger to dispense both components equally at a 1:1 ratio.
âĸ Mix
Stir thoroughly for approximately 1â2 minutes until the mixture has a completely uniform colour.
âŖ Apply
Apply slightly over the damaged area and smooth with the supplied scraper before curing.
⤠Cure
Allow approximately 24 hours for curing. Lightly sand after curing if required.
â ī¸ Important Safety Information
- Do not use on soft silicone, PE or PP surfaces.
- Do not use on food-contact surfaces.
- Do not use inside fuel tanks.
- Not intended for load-bearing structural cracks.
- Surface preparation is important for the best repair result.
- Mix both components thoroughly until the colour is uniform.
- Allow approximately 24 hours before heavy use or painting.
- Keep away from children and avoid contact with eyes and skin.
- Use in a well-ventilated area and follow the supplied instructions.
đ Storage & Handling
- Store sealed in a cool, dry place away from direct sunlight.
- Avoid unnecessary skin contact and use suitable protective gloves.
- Mixed epoxy cannot be reused.
- Unmixed components can be resealed for storage.
- If swallowed, seek appropriate medical advice immediately.
đī¸ Customer Policies
đ Fast & Reliable Service
Orders are carefully handled and dispatched according to the selected delivery service.
âŠī¸ 30-Day Returns
Returns are accepted in accordance with the eBay returns policy.
đŦ Customer Support
If you have any questions or concerns, please contact us through eBay. We are always happy to help.