Fitment:
For Mercedes-Benz GLC350e X253 2018-2020 L4 2.0L Front Right
Items Included:
1*CV Axle Shaft
CV Axle Installation:
Step 1
For flange-style inner CV joints, apply thread-retaining compound to the bolts as necessary and bolt the axle to the flange. Torque the bolts to OE specifications.
Step 2
For inner CV joints that plug into the transmission and are retained in the
transmission by a circlip, slide the inner joint into the transmission until the circlip locks in place. After installation, pull the inner joint housing gently to ensure proper installation. For CV axles equipped with axle carrier bearings, ensure the bearings are properly seated in the carrier bracket.
Step 3
If the inner CV joint plugs into the transmission but doesn’t have a retaining
circlip, slide the inner joint into the transmission to ensure proper installation. For CV axles equipped with axle carrier bearings, ensure the bearings are properly seated in the carrier bracket.
Step 4
Install the CV axle to the wheel hub. Take care to not damage the ABS sensor (if equipped).
Step 5
Tighten the ball joints, control arms, tie rods and any other suspension parts that were disassembled to remove the CV axle. Torque the parts to their proper OE specifications.
Step 6
Use the new axle retaining nut/bolt and torque as directed by the OE service
information.
Step 7
Reinstall the wheel and torque the lug nuts to OE specifications.
Attention:
*Professional Installation is Highly Recommended.
*If you have any questions about the product, you can contact us at any time.