• Bullet Points:
  Double Mode Wire Stripping: The wire stripper machine lets you change between precision stripping and high-speed work and it supports both manual hand-crank and electric drill attachment modes. Designed to never stop working, it keeps cable prep moving in workshop tasks
  Harness and Cable Support: This wire stripping machine handles wire diameters from 2mm to 25mm, 10-24 AWG, and supports coaxial cables and automotive wiring harnesses. It fully works with PVC, silicone, and rubber insulation so you can strip wires in repair shops and DIY work
  Tough and Wear-Resistant: This copper stripper features a solid aluminum alloy body and hardened steel cutter for tough and wear-resistant work. Bench mount with 4 locking holes and zero vibration operating keeps work steady, giving long-lasting durability for wire stripping
  Nighttime Friendly Quiet Stripping: This scrap wire stripping tool has a high-efficiency roller feed for 10x faster wire stripping and quiet performance, so late-night copper wire stripping will not disturb family or neighbors. Indoor and night use ready for garage and workshop jobs
  Factory Pre-Calibrated Cutter Depth: The scrap wire stripping machine has a factory pre-calibrated cutter depth, so no trial cuts are needed; beginners can work with zero mistakes, never damage the conductor, and save material and hassle when processing scrap copper wire
  Drill Powered Wire Stripper offers 2 in 1 function with Drill Powered/Hand Crank modes. Strip Cable from 0.08 inch - 1 inch for Recycling, repairs, and DIY projects. Ideal for DIY Enthusiasts, Professionals, Electricians, Workshop, Shed, Household, Garage. Use the Drill Powered Wire Stripper for cable stripping and Recycling.
  
  Specification
  Material: iron + ABS
  Wire diameter range: 2-25mm/0.08-1 inch
  Power: drill powered/hand crank
  Used for: Copper wire/aluminum wire/sheathed wire/soft wire/hard wire and other types of wire and cables
  
  Key points for machine use:
  1. Check that the cutter aligns with the V-slotof the gear; if not, adjust the cutter.
  2. Ensure the wire enters the machine in a straight line and that there is no gap between the gears.
  3. Check if the cutter rotates freely by turning it by hand; if it does not, adjust the screws on both sides of the cutter.
  4. The wire-inlet plate should remain in the lower position so the wire travels upward (use the hand crank to assist with the upward feed).
  5. When feeding the wire through, do not apply excessive pressure with the cutter; adjust the pressure gradually while observing the cut. Apply only enough pressure to slice through the wire insulation—pressing too hard at once causes the cutter to dig in too deeply, preventing the wire from moving forward.
  
  List
  Wire stripper*1
  Handle*1
  Wrenches*2
  Hexagonal screws*3
  Spare cutter*1
  Screws*4
  
  Notes:
  1. Due to the different monitor and light effects, the actual color might be slightly different from the color that is shown in the pictures.
  2. Please forgive a slight measuring deviation due to manual measurement.