ETERFANT 18L Dental Autoclave Steam Sterilizer Medical Sterilization No drying function 

Key Features:
- Cycle progresses automatically through conditioning, sterilizing, exhaust, drying, and venting phases.
- Constructed from SUS304 or SUS316L stainless steel for durability and corrosion resistance.
- Two sterilization temperatures: 121°C/134°C, auto-starts once reached.
- Timer starts only after preset temperature is achieved, ensuring full sterilization.
- Manual door operation via rotating handle.
- Silicone rubber seals ensure uniform pressure sealing.
- High-capacity cylindrical chamber for diverse sterilization needs.

Parameters:
Rated Working Pressure: 0.22 MPa
Rated Voltage: AC110 V 
Input Power: ≤ 1800 VA
Sterilization Temperature: 121℃ /134℃
Water Tank Volume: About 1 Liter
Noise: <70 db

Notes:
- Please do not place the sterilizer on an unstable worktable, such as a shaking table, slope, or the position of the vibration.
- Do not share the same electric outllet with other electrical apparetus.
- Please pay attention to correct voltage and frequency.
- Please do not block or cover the sterilizer door and vent.
- Please do not place anything on the sterilizer.
- Please close steam discharge valve before the disinfection.
- Before each use, must supply 800ml of distilled water .
- You can close the door after the tray is placed well. Turn the door handle clockwise until the door control light is green.
- The door handle of the sterilizer should be screwed tightly, otherwise the sealing ring will burst out during the sterilization process.
- When the pressure drops to 0 and wait 1-2 minutes, you can open the door.
- Always use the anti-heat gloves to load or unload the tray into the sterilizer in order to avoid scald.

Package Contents:
- 2 x Instrument Tray
- 1 x Instrument Tray Rack
- 1 x Protective Glove
- 1 x Draining Hose
- 1 x Instructions
- 1 x Door Seal
 
////////////////////////////////////////////////////////////////////////////////////////////////////////////
 
ETERFANT 23L ClassN Dental Autoclave Steam Sterilizer Medical Sterilization No drying function

Key Features:
- Cycle progresses automatically through conditioning, sterilizing, exhaust, and venting phases.
- Constructed from SUS304 or SUS316L stainless steel for durability and corrosion resistance.
- Two sterilization temperatures: 121°C/134°C, auto-starts once reached.
- Timer starts only after preset temperature is achieved, ensuring full sterilization.
- Manual door operation via rotating handle.
- Silicone rubber seals ensure uniform pressure sealing.
- High-capacity cylindrical chamber for diverse sterilization needs.

Parameters:
Rated Working Pressure: 0.22 MPa
Rated Voltage: 110V, 60Hz
Input Power: ≤ 1800 VA
Sterilization Temperature: 121℃ /134℃
Water Tank Volume: About 1 Liter
Noise: <70 db

Notes:
- Please do not place the sterilizer on an unstable worktable, such as a shaking table, slope, or the position of the vibration.
- Do not share the same electric outllet with other electrical apparetus.
- Please pay attention to correct voltage and frequency.
- Please do not block or cover the sterilizer door and vent.
- Please do not place anything on the sterilizer.
- Please close steam discharge valve before the disinfection.
- Before each use, must supply 900ml of distilled water .
- You can close the door after the tray is placed well. Turn the door handle clockwise until the door control light is green.
- The door handle of the sterilizer should be screwed tightly, otherwise the sealing ring will burst out during the sterilization process.
- When the pressure drops to 0 and wait 1-2 minutes, you can open the door.
- Always use the anti-heat gloves to load or unload the tray into the sterilizer in order to avoid scald.

Package Contents:
- 2 x Instrument Tray
- 1 x Instrument Tray Rack
- 1 x Protective Glove
- 1 x Draining Hose
- 1 x Instructions
- 1 x Door Seal
 
/////////////////////////////////////////////////////////////////////////////////
 
USA Dental Medical Autoclave Steam Sterilizer 18L Drying Function JCH-18
 
Features:
1.Lock system: Double control with Air pressure and mechanical lock.
2.Automatic temperature control to prevent dry burning.
3.Safety: Over-heat protection/Safety valve.
4.304 stainless steel chamber.
5.Motorola Pressure Sensor.
6.With drying function.

Installation:
1. First time to use this sterilizer, should need to adjust those two front feet. To make them higher than the end two. It will make chamber add with more distilled water.
2. The machine should be placed on the flat position horizontally. Then take out the bottom plate and add water into the chamber slowly. Be sure those heating elements should be covered by water completely. Keep machine 10cm distance away from the walls.Connect the drain tube with steam vent in the back of sterilizer. Make sure the drain tube was inserted fully and secured with clamp. Another side of drain tube should be fixed and collected with sewer or barrel.
3. Recommended injection water volume (raising feet to highest ): 950-1000ml.
4. Place the heat-insulating plate above heating bar. And put silicone strip at chamber mouth.
5. The outlet end of the drain pipe cannot contact with the surface of sewage. To prevent sewage suction back to chamber during cooling down.
6) Tips for placing sterilization pouches: Place pouches with paper side facing down in a staggered manner. To avoid causing wet packaging.

Sterilization process introduce:
1. "134℃ Program" button:
Heating to pressure 0.70bar(HE.1)-the first exhaust (ГE.1)-Heating to pressure 1.70bar (HE.2)-the second exhaust (ГE2)-Heating to pressure 2.20bar (HE.3)- Start 135°C Sterilization (Lasts 6minutes)-the third exhaust (ГE.3)Balance to pressure 0.00bar (LED display “END”)- open the door (Sterilization completed).
2. "121℃ Program" button:
Heating to pressure 0.70 bar (HE.1)-the first exhaust (ГE.1)-Heating to pressure 1.00bar (HE.2)the second exhaust (ГE.2)-Heating to pressure 1.20bar (HE.3)- Start 122℃ Sterilization(Lasts 25minutes)-the third exhaust (ГE.3)-Balance to pressure 0.00bar (LED display “END”)-open the door (Sterilization completed).
3. "Dry Program" button:
Caution: Confirm that door was not closed, DRY would not able to be started after door was closed.
Click the“DRVAbutton to make indicator lighting. Click the “START” button during indicator is lighting (5 seconds). Pressure window will showing 19 seconds counting. Means drying was started. If the drying effect is not as expected, can run the drying again.

Specification:
1. Chamber size: Ф25cmX35.5cm
2. Machine size: 47.5*38.5*36.5cm
3.Machine weight: G.W:29.9kg, N.W:28.4kg
4. Power: AC110V 60Hz/1500VA;
5. Sterilization temperature/sterilization pressure: 121℃-1.2bar/134℃-2.2bar
6. Sterilization time: 25Min(121℃)/6Min(134℃)

Accessories:
1.Tray and rack* 1Set
2.Tray holder* lpc
3.Ф 13 clamp*1pc
4.Ф 12 Drain tube-2m* 1pc
5.Fuse *2pcs
6.500ml Measuring cup* 1 pc
 
///////////////////////////////////////////////////////////////////////////////
 
USA Dental Medical Autoclave Steam Sterilizer 23L Drying Function JCH-23
 
Key Features:
- Dual Safety Locking System: Combines pneumatic pressure control with a mechanical lock.
- Automatic Temperature Control: Prevents dry-firing for safety and component longevity.
- Comprehensive Safety: Equipped with overheat protection and a pressure relief safety valve.
- Premium Construction: Features a durable 304 stainless steel inner chamber.
- Precision Monitoring: Utilizes a Motorola pressure sensor for accurate readings.
- Integrated Drying Cycle: Includes an efficient drying function post-sterilization.

Installation Tips:
1. On first use, adjust the two front feet higher than the rear feet. This allows maximum distilled water capacity.
2. The machine should be placed on the flat position horizontally. Then take out the bottom plate and add water into the chamber slowly, ensuring the heating element is fully submerged. Maintain a 10 cm clearance from walls. Connect the drain tube with steam vent in the back of sterilizer. Make sure the drain tube was inserted fully and secured with clamp. Route the free end to a drain or container.
3. Recommended water volume (Max Height): 950-1000ml.
4. Place the heat-insulating plate above heating bar. And position silicone strip around the chamber opening.
5. Never allow the drain outlet to contact standing water, preventing backflow into the chamber during cooling.
6. Tips for placing sterilization pouches: Place pouches paper-side down in a staggered arrangement to prevent wet packs.

Sterilization Process Introduction:
1. "134℃ Program" Button:
Heating to pressure 0.70 bar(HE.1)-First exhaust (ГE.1)-Heating to pressure 1.70 bar (HE.2)-Second exhaust (ГE2)-Heating to pressure 2.20 bar (HE.3)- Start 135°C Sterilization (for 6 minutes)-Third exhaust (ГE.3)-Balance to pressure 0.00 bar (LED display “END”)- Open the door (Sterilization completed).
2. "121℃ Program" Button:
Heating to pressure 0.70 bar (HE.1)-First exhaust (ГE.1)-Heating to pressure 1.00 bar (HE.2)-Second exhaust (ГE.2)-Heating to pressure 1.20 bar (HE.3)- Start 122℃ Sterilization(for 25minutes)-Third exhaust (ГE.3)-Balance to pressure 0.00 bar (LED display “END”)-Open the door (Sterilization completed).
3. "Dry Program" Button:
Caution: Ensure the door is not closed. The drying program will not start if the door is closed.
Press the“DRVA button to light up the indicator. Press the “START” button while indicator is lit within 5 seconds. The display will show a 19-second countdown, confirming the drying cycle is active. If the drying effect is not as expected, rerun the drying cycle.

Specification:
Chamber Size: Ф25 cmX45 cm
Machine Size: 57.5 x 38.5 x 36.5cm
Machine Weight: G.W: 33.8 kg, N.W:32.3 kg
Power: AC 110 V 60 Hz/1500 VA
Sterilization Temperature/Sterilization Pressure: 121℃-1.2bar/134℃-2.2bar
Sterilization Time: 25 Min(121℃)/6 Min(134℃)

Package Contents:
- 1 x Tray and Rack
- 1 x Tray Holder
- 1 x Ф 13 Clamp
- 1 x Ф 12 Drain Tube
- 2 x Fuse
- 1 x 500ml Measuring Cup
 
FDA Statement:
The sale of this item may be subject to regulation by the U.S. Food
and Drug Administration and state and local regulatory agencies.
So you can bid it on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation,We have to verify your status
as an authorized purchaser of this item before shipping of the item.
Thanks for your understanding!
PushAuction