Ardex WA Epoxy Grout is a 100% Solids, High-performance, solvent-free, two-component epoxy grout and adhesive.
Ardex WA High-performance, 100% Solids Epoxy Grout and Adhesive is a solvent-free, two-component epoxy grout and adhesive.
Ardex WA Epoxy Grout Features:
Grout joints up to 1/2" (12 mm) wide
Use for setting all types of tile
Use where maximum chemical resistance and/or hygiene and cleanliness are required
Use for applications in food processing, industrial, institutional and commercial facilities
Ideal for swimming pools, hot tubs, and other wet areas, can be submerged after only 7 days
Very easy to clean with only water
Use for interior and exterior floors and walls
Waterproof and frost resistant
Solvent-free, low VOC’s
Coverage depends on tile size and grout joint size. See Ardex Grout Coverage Chart In Images
Installation:
Mixing Ratio: Mix all of “B” into “A”
Coverage (When used as a setting adhesive):
- 1/4″ x 1/4″ x 1/4″ sq. Notch trowel
- For tiles larger than 4 sq. in. (25 cm2)
- 19.5 sq. ft. / 8.8 lbs. tub (1.8 m2 / 4 kg)
- 3/16” x 5/32” V-Notch trowel
- For tiles 4 sq. in. (25 sq. cm) or less
- 32 sq. ft. / 8.8 lbs. tub (3 sq. m / 4 kg)
Coverage (When used as a grout):
See Technical Data for complete details
- Pot Life: Approx. 40 minutes
- Working Time: Approx. 1 hour
- Open Time: Approx. 1 hour
Performance:
- Time to Grout: 12 hours
- Open to Traffic: Light foot traffic: 12 hours
- Full traffic loads: 2 days
- Limited chemical resistance and submerged applications: 7 days; see Cure Time (After Grouting) section above for details
- VOC: 2.67 g/L per ASTM D2369
- Packaging: Approx. 8.8 lbs. (4 kg) net weight per tub
- Storage: Store in a cool, dry area. Do not leave package exposed to sun.
- Shelf Life: 1 year, if unopened.
- Warranty: Ardex L.P. Standard Limited Warranty applies