| Insert Information | ||||
| SANDVIK | ||||
| Insert Code | TCGT 06 T1 04L-K | |||
| ANSI Code | TCGT 1.2 (1.2) 1L-K | |||
| EAN | 12342271 | |||
| Insert Grade | 1125 | |||
| Grade ISO Range | M25 (M10-M30) - S25 (S20-S30) - N | |||
| Insert Material Type | PVD Coated Carbide | |||
| Grade Description | M - A PVD coated micro-grain carbide. Recommended for finishing of all kinds of Stainless Steels, using medium to low cutting speeds. Excellent when sharp cutting action combined with superior edge toughness or surface finish is needed. Great resistance to thermal shock makes it also suitable for light intermittent cuts. S - A PVD-coated carbide grade to be used at low speeds, or light intermittent cuts in Heat Resistant and Super Alloys. Good resistance against notch and good thermal shock makes the grade suitable to use in semi tough operations or at short contact times. | |||
| Geometry Information | Suitable for finishing turning with a very light cutting action and especially suitable for boring operations. A light cutting, positive geometry generates very low cutting forces, suitable for slender shafts, thin-walled and unstably clamped components. TCGT inserts are the same dimensions as TCMT inserts and fit the same tools. The difference is they are made to a tighter tolerance. | |||
| Quantity Supplied | 1 Pack of 10 Inserts. | |||
| Condition | The Inserts are New/Unused and the Boxes are Sealed. | |||
| DISCLAIMER | ||||
| The technical information provided in this listing is for general guidance only and has been taken from literature provided by manufacturers. Every reasonable care has been taken to ensure this information is accurate and correct and we do not accept any responsibility or liability for errors or omissions or any information that is found to be misleading. For more detailed technical information and to check this information please consult the manufacturers own literature or websites which in general have an extensive array of technical literature available. | ||||