Specifications:
Brand New,100% high quality.
Type: 540LEDs 60inch LED Strip light bar, PROGRAMMABLE Tailgate Light Bar
Input voltage: DC12V
LED power: 32W
Strip light Length: 60 inch(150cm)
Strip light width : 0.9inch (23mm)
Strip light height: 0.6inch (15mm)
Waterproof: IP68
Material: RGB LEDs + One-Piece Silica Gel
Feature: PROGRAMMABLE & Softness
Led quantity: 540pcs (RGB 3535 )
Function as a brake light, left/right turn signal light, and backup reverse light, chasing/ strobe light
Light Color: Red for Brake, White for Reverse Lights,Yellow for Flow Turn Signal(PROGRAMMABLE ), Double Flash, chasing/ strobe light (PROGRAMMABLE )
Note: This led strip only performs one function when both brake and turn signal are applied, only the brake light on. as the same, the turn signal will start functioning until the brake is released.
60" LED Tailgate Light Bar for Pick Up Trucks Trailers Vehicles
BRIGHT LIGHTS: With 540pcs 3535 RGB multicolors led chips to give out the super-bright beam. Adds clear visibility to the rear drivers, better-ensuring safe traffic on roads.
FULL FUNCTIONS: The new style programmable tailgate light features full functions of the chasing/running DRL model and flowing turn signal. also includes brake light ,double flash, and reverse lights. The One-Piece Silica Gel housing design allows for flexible installation without left or right orientation constraints, Anti-UV,dustproof.
PREMIUM QUALITY: Adopts fully sealed One-Piece Silica Gel housing with IP68 waterproof rate, works well whatever in rainy or snowy days. With inline fuse for short circuit protection, heavy-duty, and super durable.
EASY TO INSTALL LED Tailgate Light Bar: Plug and play connectivity with flat 4-pin trailer connection harness for brake/signal, and also come with a decoder to solve most of compatibility problems. No drilling required, using easier mounts 3M adhesive through a small snap-fit and a complete slide rail for adjustable , secure mounting, quickly hardwire to the tow trailer connector harness.
UNIVERSAL FITMENT: This flexible light strip features 60 inches long, widely suited for almost all 12V operated at DC 12V wide voltage, Pickup Trucks, Trailers, Cars, SUV, RV, VAN, boat anchor, etc.
What's Included?
1x 60inch Truck Tailgate LED Light Strip Programmable
1x 4-way Flat Female to Color Coded Pigtail Wires Adapter
1x Decoder
Small snap-fit W/ 3M adhesive
General installation information:
1. Select desired mounting position and make sure that the surface is clean and clear of dirt, water or wax.
2. Peel off the sticky tape and snap-fit the tailgate bar onto the car
3. Connect the power cord to vehicle
4. Plug and play connectivity with flat 4-pin trailer connection harness for brake/signal, will need to tap wire for the backup reverse light
5. Adds decoder to solve compatibility problems if neccessory.
About the Installation:
(1) It's a universal fit, but pls measure the area you're going to install it in first before ordering.
(2) How to install? Do I have to screw the screws if I install it?
No screws necessary. It has a sticky tape already in place. Just peel the paper cover and stick on the tailgate.
UPGRADED 6-Functions:
Running mode, Programmable--7model multi-colors
Brake mode, all Red LEDs light up(high beam)
Reverse mode, all White LEDs light up
Turn mode, Programmable--6model multi-colors
Hazard Emergency Double Flash Mode:left & Right indicator sequentially flowing from center to both sides.
Wires Connection Tips
Plug Play flat 4-pin trailer connection harness;
White wire is connected to the Backup signal