Product Overview

Create a neat seal around suitable bathroom and kitchen edges with this self-adhesive PVC caulk sealing strip.

Each flexible strip measures 3.2 metres long and is available in either 2.2 cm or 3.8 cm width, depending on the selected variation.

The strip combines flexible PVC with an acrylic adhesive backing and can be cut to the required length. It is designed for use on clean, dry and smooth surfaces around baths, sinks, toilets, worktops, wall edges and similar areas.

How to Install

1. Remove any old sealant, dirt, grease or residue from the intended area.
2. Ensure the surface is completely clean and dry.
3. Measure the required length.
4. Cut the sealing strip carefully to size.
5. Peel away the adhesive backing gradually.
6. Position the strip along the required joint or edge.
7. Press firmly and evenly along the entire strip to help the adhesive bond.
8. Pay particular attention to corners and joins.
9. Allow the adhesive to settle before exposing the area to water.

Safety & Maintenance Information

• Apply only to suitable clean, dry and smooth surfaces.
• Do not install over loose, dusty, greasy or deteriorating surfaces.
• Keep away from open flames and excessive heat.
• Keep out of reach of young children.
• Use care when cutting the strip with scissors or other cutting tools.
• Inspect periodically for lifting, damage or loss of adhesion.
• Replace the strip if it becomes significantly damaged or detached.
• Keep the sealed area reasonably clean and dry when not in use.