Gnome Holding Love Letter Mold has the following finished figurine dimensions:• Height: 100 mm / 3.9 in
• Width: 40 mm / 1.6 in
• Length: 40 mm / 1.6 in
• The mold has 1 cut for easier, controlled demolding.
Material and Key Info• Made of high-quality flexible silicone
• Shore hardness: 10–15 A
• Flexible construction supports gradual, controlled demolding
• Temperature range: –50°C to +230°C (–58°F to +446°F)
• Produced using vacuum equipment for consistent mold quality
• Detailed silicone surface can transfer fine surface texture
• Suitable for direct contact with food products such as chocolate, candy, fondant, marzipan, and ice
• Do not use in an oven or for baking, cooking, or heating food. The stated temperature range is a material limit, not a recommended operating temperature
• Designed for repeated casting use with proper care and storage
• Suitable for decorative candle making, gypsum casting, resin crafts, and specialty soaps
Care and Storage• Clean gently with warm water, a soft sponge, and mild dish soap after casting
• Remove residual casting material carefully from recessed heart patterns without using sharp metal tools
• Avoid excessive stretching along the cut seam or the tapered hat finial during demolding
• Allow the mold to dry completely before placing it into storage
• Store away from direct sunlight, open flames, and direct heat sources
• Keep the mold in its natural, resting shape to prevent permanent deformation
Product DescriptionThis silicone casting mold depicts a Scandinavian-style gnome figurine holding a love letter envelope directly in front of its chest. The finished figurine features a tall conical hat covered with embossed miniature hearts and crowned with a heart-shaped finial. Below the brim, a smooth round nose rests over a textured beard with distinct vertical hair strands. The gnome holds a postal envelope sealed with a raised central heart in both hands, set above a simple robe hem and small sculpted shoes.
This listing is for the silicone mold only. Finished castings are not included.
With finished dimensions of 100 mm in height, 40 mm in width, and 40 mm in length, the mold produces a compact decorative piece well suited for tabletop displays and gift projects. To make demolding manageable given the tall tapered hat and front-facing relief details, the mold is manufactured with one factory cut. This allows you to open the mold cavity progressively rather than pulling the finished piece through a narrow opening.
When casting candles with this gnome candle mold, choose a wax formulation intended for molded freestanding projects. Allow the wax to cool thoroughly through the center before opening the cut, as demolding while the wax is still warm can distort the narrow tip or the heart seal on the envelope. For fluid mixtures such as plaster, keep the cut edges aligned and properly secured during pouring to help maintain a clean seam.
Suitable for Holidays and Occasions• Valentine's Day collections, romantic handmade tokens, and themed tabletop displays.
• Seasonal craft markets, spring fairs, and artisan stalls featuring character figurines and novelty candles.
• Anniversary keepsakes, wedding favors, and love-letter themed handmade gift sets.
Can Be Used For• Candle Making - Sculptural freestanding candles; use a wax blend formulated for molded pillar candles and allow complete cooling before peeling the silicone away from the tall hat.
• Plaster and Gypsum Casting - Solid decorative figurine ornaments; a fluid, fine casting mixture combined with gentle tapping helps air rise from the small embossed hearts and beard grooves.
• Resin Casting - Cast decorative figurines and desk accents; pour slowly from a low point so the resin rises smoothly through the envelope details and narrow hat finial.
• Soap Making - Character soap bars; ensure the soap has completely hardened before opening the side cut to avoid dragging soft details.
We masterfully create silicone molds, but unfortunately, we're not so great with foreign languages. That's why our descriptions might seem a bit strange, as we used an online translator. Thank you for your understanding! :)
Craft charming romantic decor and seasonal gifts with this detailed silicone gnome mold. Inspired by traditional Nordic folk art, this swedish gnome mold produces a freestanding character holding a sealed letter directly against its chest. The design features an elongated conical hat embossed with miniature raised hearts, crowned by a heart-shaped finial, and finished with a round button nose over a textured flowing beard.
Designed for multiple crafting techniques, this figurine mold works seamlessly with a variety of pourable mediums. Crafters making character candles can use it as a gnome candle mold with freestanding pillar wax blends, resulting in clean, detailed holiday centerpieces. For handcrafted bath products, it functions reliably as a gnome soap mold to create novelty gift bars. When casting with epoxy or polyurethane, it serves as a resilient resin gnome mold, while mixing fine plaster or cement allows it to be used as a concrete gnome mold for decorative tabletop accents.
Whether you are creating festive projects with a classic gonk mold or preparing romantic keepsakes with a themed valentines day mold, the integrated envelope mold pattern captures crisp lines on the front seal. This scandinavian mold serves as an expressive gnome figurine mold and a versatile gnome ornament mold for Valentine displays, anniversaries, and seasonal craft collections. The silicone mold includes a single side cut to ensure gentle, controlled demolding of the tall tapered hat without tearing delicate relief elements. Please note that this product includes the silicone mold only; finished castings are not included.
We are a manufacturer of high-quality silicone molds for soap, candles, plaster, and resins!
Each mold can be used to shape any of the listed materials, as well as others, except for food.
We create molds using a vacuum device, ensuring precise detailing and no air bubbles. The molds are made from durable, flexible silicone—our silicone molds will last for many years and withstand hundreds of casts.
No need to spray the mold with silicone before use! Candles can always be easily removed from our molds, whether the design is intricate or simple!
We have been in the silicone mold market since 2011. Customers from all over the world trust and recommend us.
These molds are especially great for candles—whether made from wax or paraffin—each candle will be beautiful and detailed, even for beginners, and will amaze anyone who sees it.
