Headlight and Taillights
Features & Highlights
- Direct OEM replacement, no modification required
- High brightness lighting for improved nighttime driving safety
- Even light distribution with no dark spots
- Waterproof and dustproof design, suitable for all weather conditions
- Plug-and-play, easy installation
- Stylish appearance enhances vehicle aesthetics
Package Contents
The same item as shown in the picture.
Specifications
OE/OEM Part Number: 55277409AD, 55277410AD
Interchange Part Number: CH2519135, CH2518135, CH2503217, CH2502217
Assembly Type: Composite
Type: Headlight Assembly
Voltage: 12 V
Warranty: 5 Years
Vehicle Fitment
For DODGE RAM 1500 2500 3500
Installation Steps
Step 1: Prepare tools
Step 2: Disconnect vehicle power
Step 3: Remove original light assembly
Step 4: Clean the mounting area
Step 5: Unpack the new light assembly
Step 6: Connect wiring harness connectors
Step 7: Install and secure the new light assembly
Step 8: Organize the wiring harness
Step 9: Test all lighting functions
Step 10: Adjust beam height
Step 11: Installation complete
Important Notes
- This headlight assembly only works properly on vehicles with the exact corresponding factory configurations.
- If your vehicle does not have the listed configurations, this headlight may not function properly.
Working Principle
- The sealed structure isolates moisture to prevent persistent fogging inside the housing
- Internal optical structure concentrates light to provide stable illumination for driving
- The wiring design complies with standard vehicle circuit voltage
Q1: What should I do if I receive damage?
A: Please keep the packaging and take photos to contact us if it is damaged during unpacking; The high probability of damage after installation is due to improper installation.
Q2: What should I do if there are gaps after installation?
A: First, check if there are any gaps in the original headlights. If so, there may be a problem with the vehicle's sheet metal; If there is none, remove and reinstall to check the card position. If it still does not work, it can be returned.
Q3: What should I do if there is fog or water ingress inside the headlights?
A: A brief mist is a normal phenomenon caused by temperature differences; If the accumulated water cannot be eliminated for a long time, you can contact after-sales service for replacement.
Q4: What should I do if one side doesn't light up?
A: Check if the plug is loose, if the pins are poorly connected, and if the wiring is correct. If everything is normal, then there is a problem with the circuit board. Contact after-sales service.
Q5: What should I do if LED lights flicker?
A: Add a resistor module – it will solve the problem.
