Specifications:
Name: R-type precision locking nut
Hardness: HRC 28 ° 32
Thread accuracy: ISO 4H
Run Out: 0.005mm
Size: Nut thread inner diameter * pitch (outer diameter * thickness)
Eg: M30x2.0P (45x12mm) (Nut inner diameter=M30; Pitch=2.0P; Outer diameter=45mm, thickness=12mm)
*The R-type locking series adopts radial locking method, which has a relatively thin thickness and is suitable for installation environments where there are certain limitations in nut thickness space and other products cannot be used.
Feature
1.R-type 3-point radial locking structure, excellent anti-loosening & anti-backlash performance, no loose under high-speed vibration.
2.Fine precision thread, end runout ≤0.005mm, high coaxiality to ensure smooth spindle operation.
3.Thin body design, no lock washer required, suitable for narrow installation space.
4.45 steel / 42CrMo alloy steel quenched & tempered, wear-resistant and long service life.
Application:
1. Locking of spindle bearings for CNC lathes and machining centers
2. Pre tighten the limit at both ends of the ball screw
3. Linear sliding table, servo drive module, precision reducer bearing positioning
4. Anti loosening fixation of carving machine and high-speed motor shaft
Warm Tips:
1.Due to various factors such as monitor brightness and lighting intensity, the actual color of the item may vary Slightly different from the images displayed on the website.
2. Please consider the slight manual measurement deviation in the data.
Name: R-type precision locking nut
Hardness: HRC 28 ° 32
Thread accuracy: ISO 4H
Run Out: 0.005mm
Size: Nut thread inner diameter * pitch (outer diameter * thickness)
Eg: M30x2.0P (45x12mm) (Nut inner diameter=M30; Pitch=2.0P; Outer diameter=45mm, thickness=12mm)
*The R-type locking series adopts radial locking method, which has a relatively thin thickness and is suitable for installation environments where there are certain limitations in nut thickness space and other products cannot be used.
Feature
1.R-type 3-point radial locking structure, excellent anti-loosening & anti-backlash performance, no loose under high-speed vibration.
2.Fine precision thread, end runout ≤0.005mm, high coaxiality to ensure smooth spindle operation.
3.Thin body design, no lock washer required, suitable for narrow installation space.
4.45 steel / 42CrMo alloy steel quenched & tempered, wear-resistant and long service life.
Application:
1. Locking of spindle bearings for CNC lathes and machining centers
2. Pre tighten the limit at both ends of the ball screw
3. Linear sliding table, servo drive module, precision reducer bearing positioning
4. Anti loosening fixation of carving machine and high-speed motor shaft
Warm Tips:
1.Due to various factors such as monitor brightness and lighting intensity, the actual color of the item may vary Slightly different from the images displayed on the website.
2. Please consider the slight manual measurement deviation in the data.
