MGE Pulsar MX 5000 RT 5 kVA 4.5 kW Online Double-Conversion Rack-Mountable UPS
Protect critical servers, networking equipment, and other sensitive electronics with the MGE Pulsar MX 5000 RT online uninterruptible power supply. Rated at 5,000 VA / 4,500 W, this enterprise-class UPS uses VFI-SS-113 online double-conversion technology with power factor correction to provide clean, regulated power and reliable protection against electrical disturbances. The unit can be installed as a rack-mounted UPS or configured as a tower system.
Features
- 5 kVA / 4.5 kW power capacity
- Online double-conversion UPS technology
- VFI-SS-113 topology for continuous power conditioning
- Power factor correction for improved efficiency and load handling
- Static bypass switch for continued power delivery during appropriate bypass conditions
- Rack-mountable 3U design
- Can also be configured as a tower unit
- Supports multiple output voltage configurations
- 50/60 Hz frequency auto-selection
- Frequency-converter operation supported
- Built-in communication and monitoring capabilities
- Compatible with extended battery modules for longer runtime
- Designed for servers, networking equipment, telecommunications, and other critical loads
- Enterprise-grade design suitable for IT and facility applications
Specifications
- Brand: MGE
- Series: Pulsar MX
- Model: MX 5000 RT
- Product Type: Online Uninterruptible Power Supply
- UPS Topology: Online Double Conversion
- VFI Classification: VFI-SS-113
- Rated Capacity: 5,000 VA / 4,500 W
- Input Phase: Single Phase
- Nominal Input Voltage: 200 / 208 / 220 / 230 / 240 / 250 V
- Input Voltage Range: 120–280 V
- Input Frequency: 40–70 Hz
- Frequency: 50/60 Hz Auto-Select
- Power Factor: Greater than 0.99
- Output Voltage: 200 / 208 / 220 / 230 / 240 / 250 V
- Output Frequency: 50/60 Hz ±0.5%
- Output Harmonic Distortion: Less than 3% in the original MX 5000 RT specification
- Overload Capacity: 105% continuous; 110% for 2 minutes; 125% for 1 minute; greater than 150% for 0.5 second
- Cooling: Convection cooled static bypass design
- Battery Type: Sealed lead-acid, maintenance-free
- Standard Battery Configuration: 15 × 12 V, 5 Ah battery modules
- Operating Temperature: 0°C to 40°C
- Relative Humidity: 20%–90%, non-condensing
- Storage Temperature: -25°C to 40°C
- Maximum Altitude: 1,000 m
- Noise Level: Less than 45 dBA
- Rack Height: 3U
- Rack Width: 19-inch class
- Rack Depth Compatibility: 800–1000 mm rack depth
- Communications: USB and serial communication, remote power-off, output contacts, and EXB battery detection
- Extended Battery Support: Yes
The manufacturer documentation specifies 5 kVA / 4.5 kW capacity and online double-conversion operation. The published product literature also lists a standard rack configuration of approximately 3U and compatibility with 800–1000 mm deep racks.
Backup Runtime
The standard 5 kVA Pulsar MX RT configuration provides approximately 8 minutes of standard backup time, depending on load and operating conditions. Optional EXB battery modules can substantially extend runtime; published specifications list approximately 35 minutes with one EXB, 60 minutes with two EXB units, and 95 minutes with three EXB units under the specified conditions.
Rack-Mount Installation
- Rack-mountable 3U chassis
- Front mounting brackets are adjustable
- Rear bracket system is available for rack installation
- Manufacturer documentation recommends removing the battery tray to make rack integration easier because of the UPS weight
- Rack rails and mounting hardware may be supplied depending on the specific configuration
Package Includes
- 1 × MGE Pulsar MX 5000 RT 5 kVA / 4.5 kW UPS
Please note: Battery condition, rack rails, power cables, communication cards, and external battery modules should be verified separately based on the exact unit being sold.