Boiler Combustion Igniter Diesel Heater Siphon Waste Oil Burner Nozzle High Voltage Pulse Transformer 15KV Gas Stove Ignitor
- Nozzle bore diameter: 0.5mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm,3.0mm, 3.5mm, 4.0mm
- Nozzle size: 9/16"
- Nozzle oil inlet: 1/8"
- Nozzle air inlet: 1/4"
- Default connector: 8mm
- Wire Length: 2pcs * 1m
Remark: The connector diameter of nozzle we have 6mm, 8mm and 10mm, you can remark the connector when you make an order, if you didn't remark, we will send the default connector of 8mm, thanks.
Features：
· The use of compressed air to swirl inside the tubes and mix the atomized droplets impact.
· Can produce tiny micro particle size mist particles at low pressure and low volume conditions.
· Can control the air flow and pressure to adjust the spray flow, angle and size granularity.
· Since the fluid passage of nozzle is large, it have a good anti-clogging effect.
· In the heavy oil, waste oil burner, oil and other application viscosity of the liquid atomization effect is very good.
· The working pressure range is 0-10/kg/cm2, different flow capacity needs different filter screen
- Flow capacity range is 1.5-1.7 L/h, needs a 45um oil filter screen
- Flow capacity range is 1.89-3.78 L/h, needs a 75um oil filter screen
- Flow capacity range is 4.76-5.10 L/h, needs a 125um oil filter screen
- Flow capacity range is 5.68-41.64 L/h, needs a 140um oil filter screen
- Flow capacity over 45.42L/h, no need for oil filter screen
Working pressure is 3 bar:
- 0.5mm diameter, the liquid water flow is 4 L/H;
- 0.8mm diameter, the liquid water flow is 6 L/H;
- 1.0mm diameter, the liquid water flow is 8 L/H;
- 1.5mm diameter, the liquid water flow is 11L/H;
- 2.0mm diameter, the liquid water flow is 14L/H;
- 2.5mm diameter, the liquid water flow is 17L/H;
- 3.0mm diameter, the liquid water flow is 20L/H;
- 3.5mm diameter, the liquid water flow is 23L/H;
- 4.0mm diameter, the liquid water flow is 26L/H;
The siphon height is 30cm, and the spray angle is 15-45 degree