Replacement filter pump motor for part number 67583, a 1/2HP single-phase motor that drives the oil filtration pump on Henny Penny commercial fryers, restoring proper oil circulation and filtration performance. Supplied from UK stock by LaunchCatering.
| Fits Manufacturer | Henny Penny |
| Part Number | 67583 |
| Motor Power | 1/2 HP |
| Voltage | 115 / 208 / 230V |
| Frequency / Phase | 50/60Hz, single phase |
| Speed | 1725 / 1425 RPM |
| Motor Frame | S56Z |
| Function | Oil filtration pump drive motor |
| Condition | New |
| Supplied Without | Pump seal - use seal kit 32-1308, sold separately |
| Reference | Part Number |
|---|---|
| Fits part number | 67583 |
| Supersedes | 17438, 18628, 46854 |
| Equipment Type | Model Numbers |
|---|---|
| Pressure / Open Fryer | 500, 561, 600, PFE-500, PFE-500-CFA, PFE-520 |
| Open Fryer | OE-100, OE/OG-301, OE/OG-302, OE/OG-303 |
| Electric Fryer | EEE-141, EEE-142, EEE-143, EEG-143, EEG-144, EEG-153, EEG-154, EEG-241 |
| Gas Fryer | OGA-322, OFG-324, OFG-390, LVG-104 |
| Fryer | LVE-103, LVE-104, OEA-321, OEA-324, OFE-290, CFA-600, CFE-427 |
| Waste Disposer | ODS-450 |
Always verify your equipment model against part number 67583 before ordering. Electrical installation must be carried out by a suitably qualified engineer.
Not included: pump seal (order kit 32-1308 separately)
Will this filter pump motor fit my fryer?
Part 67583 fits Henny Penny 500, 561 and 600 series pressure fryers, plus OE, OG, OEA, OFE, OFG, OGA, EEE, EEG, LVE, LVG, PFE, CFA and CFE series units, and the ODS-450 waste disposer. Verify your model against part number 67583 before ordering.
What part numbers does 67583 replace?
67583 is the current reference and supersedes earlier part numbers 17438, 18628 and 46854. If your service manual lists any of these numbers, 67583 is the correct replacement.
Is the pump seal included?
No. The pump seal is not included. If your seal needs replacing at the same time, order pump seal kit 32-1308 separately.
How do I know my filter pump motor has failed?
Common signs are the oil filtration cycle not running, a humming motor that fails to turn, tripped breakers during filtration, or slow oil return to the vat. If the pump turns freely by hand but does not run, the motor is the likely fault.
LaunchCatering is a trusted UK supplier of commercial catering equipment spare parts. Every listing is checked against part numbers and compatibility data, and our parts are held in UK stock. If you are unsure whether this part fits your machine, contact us with your model and serial number and we will verify it before you order. Henny Penny is a trademark of its respective owner and is used here only to identify fitment.