Replacement heating element kit for part number 18233-2, rated 230V 4500W, measuring approximately 311 x 432mm (12.25 x 17 inch) with a 5/8in-18 threaded mount. It fits Henny Penny 500, 561 and PFE-500 / PFE-561 pressure fryers, OE-100 and OE 301, 302 and 303 open fryers. Supplied from UK stock by LaunchCatering.
| Fits Manufacturer | Henny Penny |
| Part Number | 18233-2 |
| Type | Fryer heating element kit |
| Voltage | 230V |
| Power | 4500W (4.5kW) |
| Dimensions | Approx 311 x 432mm (12.25 x 17 inch) |
| Mount | 5/8in-18 thread |
| Condition | New |
| Supplied Without | Wiring |
| Reference | Part Number |
|---|---|
| Fits part number | 18233-2 |
| Alternative reference | HEN18233-2 |
| Brand | Equipment Type | Model Numbers |
|---|---|---|
| Henny Penny | Pressure and Open Fryers | 500, 561, PFE-500, PFE-561, OE-100, OE 301, OE 302, OE 303 |
Always verify the part number against your equipment data plate before ordering. Installation must be carried out by a suitably qualified engineer.
Not included: wiring
Will the 18233-2 fit my machine?
This part fits Henny Penny 500, 561, PFE-500, PFE-561, OE-100 and OE 301, 302 and 303 fryers. Check the part number on your existing component or your equipment data plate, or send us your model and serial number and we will confirm the fit before you order.
What are the cross-reference part numbers?
The main reference is 18233-2. It also appears under alternative references such as HEN18233-2. If your paperwork shows any of these numbers, this is the matching part.
How do I replace this part?
Isolate the appliance from the electrical supply before any work begins. Drain the frypot and isolate the fryer, disconnect the element leads, release the threaded mount, fit the new element with new seals where supplied and torque to specification. Installation must be carried out by a suitably qualified engineer.
Is this part safe to use in commercial equipment?
Yes, when correctly installed it meets the specification required for these fryers. It must be fitted by a suitably qualified engineer and the appliance tested before returning to service.
LaunchCatering is a trusted UK supplier of commercial catering equipment spare parts. Every listing is checked against part numbers and compatibility data, and our parts are held in UK stock. If you are unsure whether this part fits your machine, contact us with your model and serial number and we will verify it before you order. Henny Penny, PFE and OE are trademarks of their respective owners and are used here only to identify fitment.