DJI Matrice 4D Series 240W Charging Hub – Intelligent Sequential Charging
for Three Batteries
Compatible Products
DJI Matrice 4D / 4TD Series
Package Contents
1 × DJI Matrice 4D Series 240W Charging Hub
Product Overview
The DJI Matrice 4D Series 240W Charging Hub is an essential accessory for
professional users who rely on the DJI Matrice 4D series for demanding tasks
such as surveying, inspection, search and rescue, and industrial monitoring.
Used together with a compatible charger, the hub intelligently selects the
battery that will charge to full fastest, then charges batteries one after
another (sequential charging) until all three are ready. This smart charging
logic reduces overall waiting time and ensures your drones spend less time
on the ground and more time in the air.
The hub supports two modes:
Standard Mode (100 % SOC) – Fully charges batteries for maximum flight
endurance.
Standby Mode (90 % SOC) – Charges to 90 % to help prolong battery lifespan
during frequent daily use.
Technical Specifications
Input: SDC: 16.8 V–25.5 V, 12.1 A
Output Power: 240 W
Charging Method: Sequential charging of three batteries
Supported Modes:
Standard Mode (100 % SOC)
Standby Mode (90 % SOC)
Compatible Batteries: Matrice 4D series batteries
Operating Temperature Range for Charging: 5 °C to 40 °C
Key Features
Intelligent Charging Priority – Automatically identifies the battery closest
to full charge and charges batteries in the most time‑efficient order.
Sequential Charging – Charges up to three Matrice 4D series batteries one by
one, ensuring each receives full power safely.
Dual Operation Modes – Choose Standard Mode for 100 % capacity or Standby
Mode for 90 % to balance endurance and battery longevity.
High Output Power – 240 W output delivers fast charging for high‑capacity
enterprise batteries.
Wide Input Voltage Range – Compatible with 16.8 V–25.5 V input for use with
DJI chargers and various power sources.
Temperature Control – Safe charging between 5 °C and 40 °C protects
batteries in harsh environments.
Usage Tips
Connect Batteries – Insert up to three Matrice 4D series batteries into the
hub.
Choose Mode – Select Standard Mode for full charge or Standby Mode to extend
battery lifespan.
Power Requirements – Use a compatible charger that meets the 16.8 V–25.5 V,
12.1 A input specification.
Temperature Awareness – Charge only within 5 °C–40 °C for safe and efficient
operation.
Sequential Process – Batteries are charged one at a time according to the
hub’s smart priority logic.
Notes
Battery Compatibility – Only compatible with Matrice 4D series batteries.
Mode Selection – Standby Mode helps reduce battery wear during frequent
charging cycles.
Temperature Limits – Charging outside 5 °C–40 °C may affect performance or
battery health.
Input Voltage – Ensure your power source matches the required input range
for stable operation.
