This is our own personal SONY Home projector. From an elderly non-smoker home. Low 672hrs run time on the 20,000 hour laser light source. Runs cooler and longer than the old-fashioned projector with a light bulb. It has the original remote and Manual. 

*Has three 0.61" SXRD panels with 4K resolution (3840 x 2160 pixels each) Z-Phosphor™ laser light source delivers ultra-pure light with zero maintenance for years 

*High Dynamic Range (HDR10, HLG) for extended picture contrast and brightness with HDR sources widescreen 16:9 aspect ratio. The recommended image size: 60" to 300"

throw ratio: 1.38:1 to 2.21:1

light output: 2,000 ANSI lumens

*X1 Ultimate video processor enables Dynamic HDR Enhancer and Super *Resolution

dual database processing reduces noise and improves upscaling

TRILUMINOS™ technology for a wider color range

covers 95% of the DCI-P3 color space

*Motionflow frame interpolation for improved motion clarity on 4K and HD sources

IMAX Enhanced certification for improved performance with IMAX Enhanced 4K/HDR content

Gaming Mode reduces input lag for better video game performance

supports 4K at 60Hz with an input lag under 21ms + supports 2K at 120Hz with an input lag under 13ms

*2 HDMI 2.0b inputs both inputs are HDCP 2.3 compatible for connecting to a 4K video source to view 4K and HDR content from connected sources, use a compatible high-bandwidth HDMI cable

*RJ-45 LAN port supports network monitoring and control protocols. USB Type-A input for firmware updates

*9-pin RS-232C port for external control of the projector via compatible computer or third-party control device

*3.5mm 12V trigger output for controlling a motorized screen or other device + 3.5mm IR input for use with an external IR receiver detachable power cord

*General features: Laser diode light source lasts up to 20,000 hours ultra-quiet cooling fan (24 dB) AND supports integration with Control4, Crestron, Savant, AMX, OvrC, and Domotz systems' illuminated remote control. May be placed on a tabletop or ceiling-mounted.