Package Include:
1 x Receiver Controller
1 x Wireless Switch
1x Product manual

Receiver Parameter:
- Voltage: 85V~250V
- Quiescent Current: <5MA
- Max current: 10A
- RF frequency: 433MHz
- Working temperature: -30~+80
- Receiving Sensitivity: >97dbm
- Amount of storage Wireless Switch: 10 pieces
- encoding: 1527 Leaning
- RF Operating mode: ASK superheterodyne wireless reception
- Receiving range: Open space is more than 100 FT
Wireless Switch Parameter:
- Size: 115mm*70mm*15mm
- : ON/OFF push switch - Lifespan: 500,000 times - RF frequency: 433MHz
- encoding: 1527 Leaning
- Battery : 2x AAA ()

Set up
1. Press the learning button (on the receiver) 3 times . Wait for 3 seconds;
2. Press ON button on the wireless switch. Wait for 3 seconds;
3. Press the OFF button on the wireless switch . Succeed.
Note: This has already been setup after leaving the factory.

Reset:
Press the learning button (on the Receiver) 8 times. succeed.
Note:
After reset all the wireless switch cannot work anymore.
【Great design】433Mhz RF wireless lights switch.No wiring needed between lights and switch.Stable and reliable performance with high reception sensitivity (> - 97dBm). Radio frequency signal transmission.Strong signal can pass walls, floors, doors,board and so on.It can be controlled within 100FT distance in open area.
【Easy to use】The wireless switch can be fixed with double-sided tape or screws. You can switch on/off device from anywhere via the wireless switch. It is 86 standard switch.
【Easy to install】The mini size of receiver is 1.85 × 1.65 × 0.91 inch. It installs between power supply and device. It can be easily in most electrical boxes or junction boxes, or also use screws to fix on the board. You can easily to install it to control lights or plug. No wiring request.
【Multiplayer control】Each receiver can about 10 wireless switch. So you can share the switches to family. All of you can remote control the device connect with the receiver. And transmitter can control multiple receivers too.For example 1 switch installed on the wall next to the bedroom door, and another put on the bedside cabinet.
【Quality Assurance】High-quality relay that can be used over 400,000 times.This receiver adopts 10 Amp relay, which can load high-power electrical appliances. The receiver is suitable for AC 85V~250V voltage, so AC 110V/ 120V/ 220V/ 240V is OK.
【High Quality Switch】The wireless switch can be clicked over 500,000 times. The AAA battery is requested. And it can work for about 5 years. The battery can be replaced after disassembly.
【More Flexibility】 Extremely easy to setup and reset. You can easily add additional wireless switches by yourself depends on your needs.
【Strong Signal Reception】There is an antenna on the receiver,so that you can stretch it by yourself to a stronger signal reception.
【Secure System】The of the chip is EV1527 learning which is the most popular technology that making the remote control system more stable.
【Wide Application】Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.You can remotely operate every device connect with the receiver through the wireless switch. such as lamp, lighting, ventilation device, food waste disposer, DIY wireless plug, signal transmission and so on.