down up Polarity Reverse Switch DPDT 20A 7PIN Momentary Rocker On/Off/On 12V 24V Toggle Jumper Wires for Control Motor Hoist, Crane, Linear Actuator,
PLEASE DO NOT OPEN A RETURN / ANY CASE OR LEAVE NEGATIVE FEEDBACK WITHOUT ASKING FOR HELP.
WE ARE UNABLE TO SHIP TO PO BOX ADDRESSES.
Description
| Operation Mode | OFF-NONE-ON |
| Current Rating | 20 Amps |
| Operating Voltage | 24 Volts |
| Contact Type | Normally Open |
| Connector Type | Plug In |
| Switch Type | Rocker Switch, Toggle Switch |
| Terminal | Spade |
| Circuit Type | 2-way |
| Mounting Type | Panel Mount |
| Actuator Type | Rocker |
| Number of Positions | 2 |
| Lower Temperature Rating | 1 Degrees Celsius |
| Upper Temperature Rating | 1 Degrees Celsius |
| Controller Type | Wired Controller |
| Control Method | Touch |
| Connectivity Protocol | X-10 |
| Wattage | 240 watts |
| Compatible with Vehicle Type | Cars, SUVs, ATVs, UTVs, 4X4, Motorcycles, Trucks, Boats, Yachts, Off-road Vehicles |
| Control Type | Momentary |
| Compatible Devices | Winch, Pump, Horn, Reclining Media Room Seats, Auto Bilge Pump, led work lights, headlights, taillights, etc. |
| Smart Home Compatibility | Not Smart Home Compatible |
| Color | Momentary Down Up Switch |
| Item Dimensions | 1 x 1 x 1 inches |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Material Type | Plastic |
| Contact Material | Silver |
| Specification Met | CE |
| Model | 90251B-A |
| Global Trade Identification Number | 00840323901574 |
| Warranty Description | 2 Years Warranty |
| Part Number | 90251B-A |
| Item Type Name | Rocker Switch |
| Included Components | 1PC Rocker Switch |
| Material | Plastic |
| Item dimensions L x W x H | 1 x 1 x 1 inches |
Product description
Nilight Momentary Rocker Switch7PIN (ON)-OFF-(ON ) rocker switch with 14 AWG jumper wires.
Switch Terminal: 7 PIN;Material: Superior ABS+PC; DPDT design, this on off on switch can control 2 loads; Built-in 2 LEDs;
Product Size: 1.9"(48.3mm) x 1.04"(26.3mm). Mounting Hole Size: 1.43"(37mm) x 0.84"(21.3mm).
Fits most cars, SUVs, ATVs, UTVs, 4X4, motorcycles, trucks, Jeep Wranglers, boats, yachts, and other off-road vehicles.
Mainly used together with wiring harness to control Winch, Pump, Horn, Reclining Media Room Seats, Auto Bilge Pump, or led work lights, headlights, taillights, etc.
Durable In Use
The switch is very flexible for turning on or off. It can stand up to 10,000 times pressing under normal use.Voltage: Rated at 12V 20A and 24V 10A DC.
Easy Installation
This switch is simple to install, product comes with a wiring diagram which make it easy to wire the jumper wires within several seconds.
Premium Jumper Wires
High quality 14 gauge jumper wires, the Tin-plated copper terminals on the wire is of good stability, wear resistance, corrosion resistance.
Excellent Product
Made of ABS and PC of premium quality, the switch is impact and heat resistant. DPDT design, this on off on switch can control 2 loads.
Installation on switch holder
The 7 pin rocker switch can be installed on Nilight rocker switch holder housing for better using effect.
Installation on switch panel
It can also be replaced to any defective 7 PIN switches. Convenient and cost-effective.
LED Lighting Effect
Upper LED Illuminated
The upper light is on when the switch is pressed, and it stops working when let it off.
Lower LED Illuminated
The lower light is on when you press the switch down, and it will return off position when you remove your finger.
1 Easy Disconnect Wires 2 High Performance 3 Two Wiring Methods 1 Wide Applications 2 Multiple Scenarios- Momentary Switch: Heavy duty DPDT reverse polarity switch resetting automatically (returns to off) when released. Controls the up/down, clockwise/counterclockwise motion of DC loads (e.g. motors, hoists, cranes, linear actuators etc.).
- Dual Operation: This momentary electrical system switch is used for jogging or inching operations. A DPDT switch is equivalent to two SPDT switches. It routes two separate circuits. Connecting each of two inputs to one of two outputs. The position of the switch determines the number of ways in which two contact can be routed. Always make sure you are using a switch and wire sufficient to handle the load you are carrying. In higher draw applications, a relay may be needed.
- Wide range of application: Universal fit for all cars, RVs, SUVs, ATVs, UTVs, Cans, Buses, Marine boats, Yachts, Trailers, Jeeps, Prerunners, Campers, Caravans etc; Mainly used to control Winch, Pump, Horn, Reclining Media Room Seats, Auto Bilge Pump or led light bar, led work lights, fog lamps, headlights, taillights and auxiliary lamps, etc.
- Sturdy and durable: made of high-quality plastic and well-conductive pins; ensure long lasting durability, highly optimized for general use and will give you a pleasant experience.
- Package Includes: A 7 PIN switch, jumper wires set and a wiring diagram.

ABOUT US
We offer the best prices around on high quality products.
SHIPPING
We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.
We offer free shipping to the lower 48 states and ship within 2 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address.
RETURNS
We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA.
PAYMENT
We accept PayPal.
CONTACT US
This page content is yet to come
Please ad us to your favorite seller and visit again later
Thank You
