Properties:
Powerful:500W engine. Constant size and performance without fatigue.
Effective: Slice easily through 2800 rpm.
Stable: More than 20kg Mounted on non-slip feet.
Grinding Water Or Dry: The trimmer can be transformed working water dry work, but work in water is recommended.
Silent: Disc bore prevents noise and vibration.
Ergonomics:Outer shapes are round, easy to clean. Wide gradient and sloping work table.Window full screen.Cleaning size can work in 3 different angles, you can adjust the screws.
How to use:
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
If there is some abnormal noise when working on
Possible reason：① Axon is loosing ② Disc is not plain enough。
How to solve it：①Dissemble the disc⒃ with spanner，make the snap
Ring tightly；② change the disc。
The machine does not work when power on
Possible reason：① fuse get burnt；② motor get burnt；③ switch get wrong。
How to solve it：① change the fuse（22） which inside the socket；② change the motor ③ change the switch
Voltage: <A>220V/50Hz±10%
Power: 500W Rotational Speed: 2800 rpm
Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg
Disc Diameter: fits 23.5-32cm / 9inch - 12.5inch
Package:
1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
