Description:
Power Steering Pump:
This is the 1966 to 1976 GM saginaw style pump. But it will mount to most Chevy/GM engines with the correct mounting bracket.
This pump uses the 5/8" keyed shaft for the pulley.
Also note that this pump has 3/8"-16 "Inch" mounting holes. Some of the later model pumps have Metric threads. The Metric thread pumps do not always work well with brackets that have inch mounting hardware.
Power Steering Pump Pulley:
Color: Black
Material: Iron, with Anti-corrosion surface treatment
Pump Style: Saginaw
Pulley Style: V-Belt
Groove Quantity: 2
Pulley Attachment: Keyway
2 groove V-belt for KEYWAY design. (NOT FOR PRESS-ON DESIGN)
Keyway Bore: 5/8"
Outside Diameter: 5 3/4"
These feature deep grooves to prevent belts from slipping
Power Steering Pump Mounting Brackets:
Power steering pump bracket for your 1970-Later Small Block Chevy Engine with a short or long water pump.
Designed to provide a perfect fit and a secure grip.
This bracket works for both Short & Long Water pumps, Single or Double Groove Pulley.
This quality bracket fits a wide variety of applications due to its optional low or high mounting positions.
Mounts on the Drivers Side Bottom of the engine.
All hardware to mount this kit are included.
The power steering bracket mounts to the front of the lower driver side using the 2 lower bolt holes located by the timing chain cover (the old front mount holes).
The adjusting arm mounts to the lower water pump hole. No drilling or tapping required.
Specifications:
Color: Black
Pulley Shaft Diameter: 5/8" Key-Way
Pulley Groove: Double Groove
Pulley Diameter: 5-3/4"
Surface Finish: Chrome
Professional Installation Highly Recommended (No Instructions Included)
Fit For the Following Models:
For Small Block Chevy 265 283 305 327 350 383 and 400 Engines.
Most Common Were 70-74 Camaro & Firebird, 70-74 Nova, 65-79 Chevy / Gmc Trucks, 70-74 Chevelle Malibu El Camino, 70-74 Monte Carlo, 65-79 Impala, Caprice, Bel Air, Etc.
Note: Please compare your item carefully with photo and OE Number to avoid mistake!!!
Package Includes:
1x Power Steering Pump
1x Power Steering Pump Bracket
1x Power Steering Pump Pulley
Mounting Hardware
As shown in the picture above
We only ship the item to PayPal verified shipping address. Please make sure your shipping address is the same as PayPal, no changes are allowed once the order is shipped.
All USA location orders will be shipped out via USPS or UPS or Fedex with a tracking number. We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
We do not cover any import Duty and Tax. Customer should be responsible for the Import tax. Contact us , we will try our best to help minimize it.
HK/TW buyer please notice us your government ID #.
BRA,AR,PER buyer leave us your CPF#,CUIT#,RUC# correspondingly.
We accept Paypal only for the payment thru ebay, please do not pay directly to our Paypal account.
Paypal allows to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check Paypal for more information.
For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.
Please kindly contact us before return, our representatives will send you detail return instruction.
The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
Description:
Power Steering Pump:
This is the 1966 to 1976 GM saginaw style pump. But it will mount to most Chevy/GM engines with the correct mounting bracket.
This pump uses the 5/8" keyed shaft for the pulley.
Also note that this pump has 3/8"-16 "Inch" mounting holes. Some of the later model pumps have Metric threads. The Metric thread pumps do not always work well with brackets that have inch mounting hardware.
Power Steering Pump Pulley:
Color: Black
Material: Iron, with Anti-corrosion surface treatment
Pump Style: Saginaw
Pulley Style: V-Belt
Groove Quantity: 2
Pulley Attachment: Keyway
2 groove V-belt for KEYWAY design. (NOT FOR PRESS-ON DESIGN)
Keyway Bore: 5/8"
Outside Diameter: 5 3/4"
These feature deep grooves to prevent belts from slipping
Power Steering Pump Mounting Brackets:
Power steering pump bracket for your 1970-Later Small Block Chevy Engine with a short or long water pump.
Designed to provide a perfect fit and a secure grip.
This bracket works for both Short & Long Water pumps, Single or Double Groove Pulley.
This quality bracket fits a wide variety of applications due to its optional low or high mounting positions.
Mounts on the Drivers Side Bottom of the engine.
All hardware to mount this kit are included.
The power steering bracket mounts to the front of the lower driver side using the 2 lower bolt holes located by the timing chain cover (the old front mount holes).
The adjusting arm mounts to the lower water pump hole. No drilling or tapping required.
Specifications:
Color: Black
Pulley Shaft Diameter: 5/8" Key-Way
Pulley Groove: Double Groove
Pulley Diameter: 5-3/4"
Surface Finish: Chrome
Professional Installation Highly Recommended (No Instructions Included)
Fit For the Following Models:
For Small Block Chevy 265 283 305 327 350 383 and 400 Engines.
Most Common Were 70-74 Camaro & Firebird, 70-74 Nova, 65-79 Chevy / Gmc Trucks, 70-74 Chevelle Malibu El Camino, 70-74 Monte Carlo, 65-79 Impala, Caprice, Bel Air, Etc.
Note: Please compare your item carefully with photo and OE Number to avoid mistake!!!
Package Includes:
1x Power Steering Pump
1x Power Steering Pump Bracket
1x Power Steering Pump Pulley
Mounting Hardware
As shown in the picture above
We only ship the item to PayPal verified shipping address. Please make sure your shipping address is the same as PayPal, no changes are allowed once the order is shipped.
All USA orders will be shipped out via USPS, UPS or Fedex with a valid tracking number. We do not ship to P.O. Boxes, APO/FPO or Military Mail Boxes.
We do not cover any import Duty and Tax. Customer should be responsible for the Import tax. Contact us , we will try our best to help on minimizing it.
For HK/TW buyers, please notify us your government ID #.
For BRA,AR,PER buyers, please leave us your CPF#, CUIT# or RUC# correspondingly.
We accept Paypal only for the payment thru ebay, please do not pay directly to our Paypal account.
Paypal allows to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check with Paypal for more information.
For multiple purchases, please add items to your Ebay shopping cart and pay once for the entire order.
Please kindly contact us before returning your order(s), our representatives will send you the detailed instructions.
Our guarantee is only for the cost of the item, we will not be responsible for any other expenses such as installation, labor, towing, repair or any other related expenses.
On Jun 8, 2026 at 23:39:37 PDT, seller added the following information: