Introductions:
【What is a CV shaft】 A CV shaft is a key component in a vehicle's transmission system, primarily used to transmit power from the gearbox to the wheels.
【CV shaft function】The CV shaft continuously and smoothly transmits the torque (power) generated by the engine and transmission to the drive wheels.
【Customer Satisfaction】Installation under professional instruction is recommended.Feel free to message us through “contact sellers” if products don't meet your expectations or you are not sure about the vehicle fitment, we’ll take care of it.
Applications:
For Acura TL 2004-2006
For Honda CR-V 2002-2006
Specific:
| ABS Tone Ring Included | No |
| Axle Nut Included | Yes |
| Axle Nut Length | 0.906 IN |
| Axle Nut Length | 23 MM |
| Axle Nut Socket Size | 36 MM |
| Axle Nut Socket Size | 1.417 IN |
| Axle Nut Thread Size | M24x1.5 |
| Axle Nut Type | Hex |
| Boot Color | Black |
| Boot Material | Neoprene |
| Boot Rib Quantity | 5 |
| CV Joints Included | Yes |
Interchange Part Number :
66-4207, 664207, 44305S9A000, 44305S9AN00, 44305SCAE00,44305SCAG00, 44305SDBA00, 44305SDPA00
Package Included:
1x CV Axle
NOTE:
1. Before purchasing, confirm the vehicle's year, brand, model, and engine displacement. Also confirm the installation location , drive type , and whether it includes an ABS gear ring.
2. Please compare the Interchange Part Number in this description with the OE part number on your original vehicle or a used part. A match indicates 100% compatibility.
3. If your vehicle has been modified or you are unsure of the model, please check the number of teeth on the internal splines and external splines in the comments.
4.Please ensure your CV axis part number matches one of the parts listed above.
5.We strongly recommend following the installation steps.
6. For any needs please contact us
Installation:
1. Disassembly and Fixtures: Lift the vehicle and remove the wheels and center bearing nuts.
2. Disengage the Suspension: Remove the lower control arm or shock absorber bracket and pull the steering knuckle (steering knuckle) apart from the half-shaft.
3. Remove the Old Shaft: Carefully pull the inner end of the old CV shaft from the transmission/differential using a pry bar or sliding hammer.
4. Install the New Shaft: Push the inner end of the new CV shaft into the transmission; insert the outer end into the wheel hub bearing and tighten the center nut to the specified torque.
