Specifications:
|
input voltage |
24~50VDC(36V typical value ) |
|
|
Continuous output current |
6A |
|
|
Maximum pulse frequency |
250K |
|
|
Default rate |
9.6Kbps(Required external conversion interface) |
|
|
protect |
Peak value of over current action value 30A + 10% Overload I2t current action value of 300% 5S Overheating action value of 80 Overvoltage action value 65V Action value of under voltage voltage 18V |
|
|
Use environment |
occasion |
As far as possible to avoid dust, oil mist and corrosive gases |
|
working temperature |
0~+70°C |
|
|
Storage temperature |
-20°C~+80°C |
|
|
humidity |
40~90%RH |
|
|
Cooling mode |
Natural cooling or forced air cooling |
|
Environment:
|
Cooling |
Natural Cooling or Forced Convection |
|
|
Environment |
Space |
Avoid dust, oil frost and corrosive gases |
|
Ambient Temperature |
65°C |
|
|
Humidity |
<80%RH |
|
|
Vibration |
5.9m/s² Max |
|
|
Storage Temp. |
-10°C -80°C |
|
|
Weight |
Approx. 1.8 Kg |
|
Microstep Resolution Setting:
The micro steps setting is in the following table,while SW1,SW2,SW3,SW4 are all on,the internal default micro steps inside is activate,it can set by our servo software.
|
Switch micstep |
SW1 |
SW2 |
SW3 |
SW4 |
|
Default |
on |
on |
on |
on |
|
800 |
off |
on |
on |
on |
|
1600 |
on |
off |
on |
on |
|
3200 |
off |
off |
on |
on |
|
6400 |
on |
on |
off |
on |
|
12800 |
off |
on |
off |
on |
|
25600 |
on |
off |
off |
on |
|
51200 |
off |
off |
off |
on |
|
1000 |
on |
on |
on |
off |
|
2000 |
off |
on |
on |
off |
|
4000 |
on |
off |
on |
off |
|
5000 |
off |
off |
on |
off |
|
8000 |
on |
on |
off |
off |
|
10000 |
off |
on |
off |
off |
|
20000 |
on |
off |
off |
off |
|
40000 |
off |
off |
off |
off |
|
Model |
Length L(mm) |
Shaft length (mm) |
|
iHSV57-30-10-36-XXX |
110 |
30 |
|
iHSV57-36-14-36-XXX |
130 |
|
|
iHSV57-36-18-36-XXX |
150 |
|
|
iHSV57-30-10-36-21-XXX |
110 |
21 |
|
iHSV57-30-14-36-21-XXX |
130 |
|
|
iHSV57-30-18-36-21-XXX |
150 |
Note: Ship 30mm length shaft defautly.
