1. Material: Iron Plating
  2. Size Chart:
  • Cup Length: Approx. 12cm
  • Cup Diameter: Approx. 8.4cm
  • Funnel Diameter: Approx. 6.5cm/2.56inch

 

 If you have the following needs ⭐

  1. Yellowed and old headlights
  2. Second-Hand car refurbishment
  3. Headlights are prone to scratching and yellowing due to weather effects such as sandstorms
  4. Car repair shop business and need headlight refurbishment work
  5. Don't want to go to a garage and enjoy DIY

 

 ⭐Our products can gives you ⭐

✅Get an almost new pair of headlights for just a few tens of dollars
✅Enjoy the pleasure of DIY your own car
✅Better conduct your auto shop business
✅Save on the expensive cost of replacing your headlights
✅Repair tools that can be reused to restore multiple cars at home
✅Special restoration fluid for better headlight protection
✅Clear headlights for improved driving safety
✅Steam restoration is more detailed and comprehensive than wipe restoration.

 

⭐Usage:

  • 1.Check the damage of headlight, common symptoms are: crazing, yellowing, oxidation, blurring, molting, scratches and other symptoms.
  • 2.Please stay in a clean, dry and windless environment,Before grinding, cover all around the lamp with protective film, and polish the lamp cover with sandpaper until there is no glossiness,Use 180#, 240#, 360#, 600#, 800#,1200#,wash and cross polish with water from small to large, Polish thoroughly and do not omit the scope, avoid rework, clean with water after polishing and dry with towel.
  • 3.Add liquid into the atomizing cup (the unused coating liquid can be recovered, and a little more can be added appropriately), heat it to steam, power on the headlamp, unplug the power after atomization, expose to the sun, Wipe the water off the headlight,and recover the coating liquid.

 

Features

  1. headlights refurbished heating cup
  2. High-power heating faster, full effect of better atomization, more savings in construction time and liquid
  3. Using heating cup base, thread base so that your product more competitive advantage
  4. High-end electrolytic liner enhanced electrolytic atomization effect
  5. 100 % new and never used

Warning

  1. Keep it away from children.
  2. It must be stored in a place where the temperature is less than 40 degree celsius. Exposure, puncture or incineration are forbidden.
  3. This product contains hazardous chemicals, keep away from child pregnant women. Adults please use under protection.
  4. Please use in a ventilated environment,Vapors or mists are irritating to eyes, mucous membranes and upper respiratory tract,skin irritation.

 

⭐Included

  • 1x car headlight refurbished heating cup
  • 1x US cable
  • 1x 500ml restoration fluid
  • 6x sandpaper (different surface roughness)
  • 1x adhesive tape
  • 1x sanding plate

(New and old packages are sent randomly)

 

NOTE!!
Q: No steam is produced after turning on the power.
A: Make sure the switch on the heating cup is turned on (set to the “O” position).
 
Q: Steam is produced but the coating is not effective
A: 1. The original coating on the headlight surface must be completely sanded off. If the surface is not fully sanded, the coating will not adhere. Start sanding with the finest-grit sandpaper.
 
2. When the ambient temperature is below 20°C, use a heat lamp or hair dryer to heat the headlight surface to 50°C, or turn on the headlights and let them warm up for 10 minutes before applying the coating.
 
3.Should you have any questions, feel free to get in touch anytime. We highly value customer experience and your feedback.


On May 28, 2026 at 04:28:51 PDT, seller added the following information:

Datacaciques