Features: Calibration Not Required: ModelGauge estimates remaining capacity without preliminary full battery cycling, with a stated ±5% accuracy specification for battery readings. Low-Current Battery Tracking: Typical operating current of less than 1 μA limits the gauge's own contribution to battery drain while it measures remaining capacity and voltage. Solderless I2C Integration: STEMMA QT and Qwiic connectors establish physical and I2C links without soldering, while address 0x36 provides a defined interface point. Defined Single-Cell Use: Built for 2.5-4.5 V single-cell lithium batteries with CircuitPython driver support; do not use it with multi-cell series packs or other battery types. Package Contents: Includes 1 battery gauge module and 1 pin header; verify battery polarity and avoid connecting or disconnecting the interface while powered.
Specifications: Component: Gold-plated PCB Size: Approx. 2.54 x 2.00 x 0.50cm / 1.00 x 0.79 x 0.20inch Equipped with a MAX17048 dedicated battery fuellevel chip Interface: STEMMA QT/Qwiic standardised interface Battery fuellevel estimation accuracy: ±5% Voltage measurement: 2.5V–4.5V Supply voltage: 2.5V–4.5V Operating current: <1μA I2C address: 0x36 Type: Single module
note: 1.Please allow 1-2cm errors due to manual measurement, make sure that you donot mind before you order. 2.Due to the differences between different monitors, the picture may not reflect the actual color of the item.