• Fitment
  •  
  • For Nissan Rogue 2.5L 2014-2020 
  •  
  •  
  • Installation Instructions
  •  
  • 1. Relieve fuel pressure: Pull fuel pump relay, crank engine until stall. Disconnect battery negative terminal.
  •  2. Access fuel pump: Tilt truck bed forward (recommended) or remove fuel tank. Clean tank top to keep dirt out.
  •  3. Disconnect fuel lines and wiring (take photos for reference). Remove old pump module by tapping lock ring counter‑clockwise with a brass punch.
  •  4. Clean tank interior, remove debris. Discard old O‑ring. Assemble float arm on new module, remove red protective cap.

    • For Nissan Rogue 2.5L 2014-2020 Fuel Pump Module Assembly

    Fitment

     

    For Nissan Rogue 2.5L 2014-2020 

     

     

    Installation Instructions

     

    1. Relieve fuel pressure: Pull fuel pump relay, crank engine until stall. Disconnect battery negative terminal.


    2. Access fuel pump: Tilt truck bed forward (recommended) or remove fuel tank. Clean tank top to keep dirt out.


    3. Disconnect fuel lines and wiring (take photos for reference). Remove old pump module by tapping lock ring counter‑clockwise with a brass punch.


    4. Clean tank interior, remove debris. Discard old O‑ring. Assemble float arm on new module, remove red protective cap.


    5. Lubricate new O‑ring with engine oil or petroleum jelly. **Do NOT use grease**.


    6. Fit O‑ring to tank opening. Install new pump module, align arrow marks and press firmly. Do not bend float arm.


    7. Tighten lock ring clockwise with brass punch until fully seated.


    8. Re‑connect all fuel lines, wires and hoses (listen for click sound). Reinstall tank / reset truck bed. Reconnect battery.


    9. Prime fuel system: Turn key to ON position (DO NOT start engine) 2‑3 times, hold 2‑3 seconds each time.


    10. Start engine and check all joints for fuel leaks.

     

     

    Troubleshooting

     

    Lock ring cannot sit flush: Remove leftover old O‑ring, re‑lubricate, tap lock ring evenly.


    Incorrect fuel gauge reading: Check for bent float arm or loose wire crimps.


    Engine turns over but won’t start: Re‑prime fuel system, ensure all connectors click into place.


    Gas odor present: Retighten lock ring, inspect O‑ring for pinching / damage.


    Item Specifics
    Brand Apremiumstore
    Type Fuel Pump
    Fuel Type Gasoline
    Drive Type Electrical
    Items Included Fuel Filter Mounting Hardware
    Manufacturer Part Number 135187202610
    OE/OEM Part Number FG2669
    Voltage 12 V
    Country of Origin United States
    Amperage 8 A
    Universal Fitment No
    Performance Part No
    Vintage Part No
    Manufacturer Warranty 1 Year
    Flow Rate 50 gph
    Fuel Level Sender Resistance 15-160 ohm
    Interchange Part Number 170406FK0A
    Pressure 52 psi (3.585 bar)
    Superseded Part Number 170406FK0A
    California Prop 65 Warning No Proposition 65 warning is required with this product.
    Connector Gender Female
    Connector Shape Rectangle
    Grade Type Regular
    Housing Material POM
    In Tank or External In Tank
    Inlet Type Strainer
    Length 350
    Minimum Flow Rating 22
    Minimum Pressure 48
    Negative Ground No
    Outlet Size 3/8
    Outlet Outside Diameter 9.49
    Outlet Quantity 1
    Outlet Type Quick Connect
    Pump Type Electric
    Terminal Gender Male
    Terminal Quantity 6
    Terminal Type Blade
    Top Mount Diameter 141
    Universal Or Specific Fit Specific
    Wire Quantity 6
    Wiring Harness Length 0
    Fuel Tank Pressure Sensor Included No
    Connector Color White

    Payment
    Items will be shipped out within 24 hours once payment clears, excluding weekends and holidays.

    For accurate and fast service, please confirm and select your correct shipping address before completing payment.

    Positive feedback will be left immediately upon full payment receipt. We would greatly appreciate it if you could leave positive feedback for us as well. Should you encounter any issues or concerns, please contact us prior to leaving feedback. We will be happy to assist you. Satisfaction guaranteed.

    Please submit your payment within 4 days of purchase. An Unpaid Item Dispute will be automatically opened by eBay on our behalf if payment is not received within 4 days.

    For multiple‑item purchases, please add all items to your eBay shopping cart and complete one single payment for your entire order
    Shipping
    All domestic orders are shipped from our US warehouse via USPS, UPS or FedEx, and typically arrive at your door within 2‑7 business days.
    Returns
    60‑Days Free Return & Money‑Back Guarantee.

    If you are not satisfied with your purchase, you may return the item to us in its original packaging for a full refund with no restocking fees. Return shipping cost will be covered by the seller.

    Please contact us promptly if you receive wrong items, transit‑damaged goods or defective products, and we will process your refund.

    Full refund or replacement is offered for all faulty items, including the original shipping charges.

    This guarantee applies only to the cost of the item itself. We shall not be liable for any installation‑related charges such as labor fees, towing fees, additional repair costs or any other incidental expenses.
    Contact Us
    We fully understand that a smooth transaction can sometimes be challenging. If you are not satisfied with our products, please feel free to contact us. Our support team will do our best to resolve your issues. Customer satisfaction is our top priority!
    About us

    Apremiumstore offers high‑quality auto parts with an unlimited‑mileage quality guarantee.


    All items are brand‑new in factory boxes. Extra protective packaging minimizes transit damage.


    Your satisfaction matters most. Should you not be fully satisfied with your order, please contact our support team. We will make every effort to resolve your issues.

    Best Sales
    Newly Listed
    For Nissan Rogue 2.5L 2014-2020 Fuel Pump Module Assembly

    Fitment

     

    For Nissan Rogue 2.5L 2014-2020 

     

     

    Installation Instructions

     

    1. Relieve fuel pressure: Pull fuel pump relay, crank engine until stall. Disconnect battery negative terminal.


    2. Access fuel pump: Tilt truck bed forward (recommended) or remove fuel tank. Clean tank top to keep dirt out.


    3. Disconnect fuel lines and wiring (take photos for reference). Remove old pump module by tapping lock ring counter‑clockwise with a brass punch.


    4. Clean tank interior, remove debris. Discard old O‑ring. Assemble float arm on new module, remove red protective cap.


    5. Lubricate new O‑ring with engine oil or petroleum jelly. **Do NOT use grease**.


    6. Fit O‑ring to tank opening. Install new pump module, align arrow marks and press firmly. Do not bend float arm.


    7. Tighten lock ring clockwise with brass punch until fully seated.


    8. Re‑connect all fuel lines, wires and hoses (listen for click sound). Reinstall tank / reset truck bed. Reconnect battery.


    9. Prime fuel system: Turn key to ON position (DO NOT start engine) 2‑3 times, hold 2‑3 seconds each time.


    10. Start engine and check all joints for fuel leaks.

     

     

    Troubleshooting

     

    Lock ring cannot sit flush: Remove leftover old O‑ring, re‑lubricate, tap lock ring evenly.


    Incorrect fuel gauge reading: Check for bent float arm or loose wire crimps.


    Engine turns over but won’t start: Re‑prime fuel system, ensure all connectors click into place.


    Gas odor present: Retighten lock ring, inspect O‑ring for pinching / damage.



    Items will be shipped out within 24 hours once payment clears, excluding weekends and holidays.

    For accurate and fast service, please confirm and select your correct shipping address before completing payment.

    Positive feedback will be left immediately upon full payment receipt. We would greatly appreciate it if you could leave positive feedback for us as well. Should you encounter any issues or concerns, please contact us prior to leaving feedback. We will be happy to assist you. Satisfaction guaranteed.

    Please submit your payment within 4 days of purchase. An Unpaid Item Dispute will be automatically opened by eBay on our behalf if payment is not received within 4 days.

    For multiple‑item purchases, please add all items to your eBay shopping cart and complete one single payment for your entire order
    All domestic orders are shipped from our US warehouse via USPS, UPS or FedEx, and typically arrive at your door within 2‑7 business days.
    60‑Days Free Return & Money‑Back Guarantee.

    If you are not satisfied with your purchase, you may return the item to us in its original packaging for a full refund with no restocking fees. Return shipping cost will be covered by the seller.

    Please contact us promptly if you receive wrong items, transit‑damaged goods or defective products, and we will process your refund.

    Full refund or replacement is offered for all faulty items, including the original shipping charges.

    This guarantee applies only to the cost of the item itself. We shall not be liable for any installation‑related charges such as labor fees, towing fees, additional repair costs or any other incidental expenses.
    We fully understand that a smooth transaction can sometimes be challenging. If you are not satisfied with our products, please feel free to contact us. Our support team will do our best to resolve your issues. Customer satisfaction is our top priority!

    Apremiumstore offers high‑quality auto parts with an unlimited‑mileage quality guarantee.


    All items are brand‑new in factory boxes. Extra protective packaging minimizes transit damage.


    Your satisfaction matters most. Should you not be fully satisfied with your order, please contact our support team. We will make every effort to resolve your issues.


    © All Rights Reserved, Apremiumstore.