Sound. Vibration. Static Correction.
Full remote training capability in an exceptionally compact 40 g receiver designed with smaller dogs in mind.

Most full-featured remote training collars are designed around medium and large dogs. Even when the strap adjusts small enough, the electronic receiver itself can still look and feel disproportionately bulky on a little dog's neck.

MicroTrainer changes that.

Its remarkably compact receiver measures only 3.7 cm wide × 2.5 cm high × 2.3 cm thick and weighs approximately 40 g.

Despite its miniature dimensions, you still get three complete remote-controlled training modes, up to 300 metres of range, two-dog capability, a safety lock, waterproof receiver and rechargeable operation.

Every dog responds differently. Three separate training modes let you select the cue appropriate for the situation and your dog's individual responsiveness.

With smaller dogs, careful selection of the appropriate training level is particularly important.

Always begin with Sound or the lowest Vibration setting and give your dog the opportunity to respond before considering Static Correction.

If Static Correction is required, begin at Level 1 and increase gradually only until you identify the lowest effective level for your dog.

The remote-controlled system allows you to deliver a cue at the moment the behaviour occurs, making it useful for reinforcing established training and interrupting unwanted behaviours.

With up to approximately 300 metres / 1,000 feet of range under optimal open conditions, you have plenty of freedom for everyday training at home, on walks or in open spaces.

Dedicated controls give you immediate access to Sound, Vibration and Static Correction without navigating complicated menus.

Actual operating range varies depending on buildings, terrain, vegetation and other environmental obstructions.

One compatible remote can control up to two receiver collars, allowing two dogs to be trained without carrying separate transmitters.

A built-in safety lock also helps prevent accidental activation while the remote is being carried or handled.

Two-dog operation requires a second compatible receiver collar.

MicroTrainer is designed particularly for toy, miniature and small dogs, while the system is suitable for dogs approximately 2–50 kg when correctly fitted.

Silicone contact-point covers are included for additional comfort.

Both the handheld transmitter and receiver collar are rechargeable.

The receiver automatically enters Standby Mode after approximately 2 minutes of inactivity. Movement wakes the receiver, helping conserve battery between training sessions.

Standby time refers to minimal use while inactive. Actual battery life between charges varies according to training frequency, correction intensity and general use.

The receiver collar is IPX6 waterproof, making it suitable for normal outdoor training and wet conditions. Note that the collar should not be submerged in water.

The contact points should make reliable contact with your dog's skin without the collar being excessively tight.

For dogs with longer or thicker coats, gently part the fur around the contact area rather than overtightening the collar.

Correct fit is particularly important when using Vibration or Static Correction and also helps keep the small receiver securely positioned.

*Maximum range is measured under optimal open conditions and may be reduced by buildings, terrain, vegetation and other obstructions.
**Width excludes belt loop. Depth excludes contact-point length.