Description

Our window regulator offer value without compromising quality. It with premium material and solid construction, ensures high strength and reliability. They direct fit -No missing holes, hardware or mounting brackets. It has been 100% tested for RPM, rotational direction, amperage and torque before shipment.

Install the window regulator as follows: 

Part1 Disconnecting the Window from the Motor

1.Remove the interior door panel.   

2.Gently remove the plastic door cover. 

3.Locate the window mounting bolts.  

4.Move the window if necessary to access the bolts. 

5.Remove the bolts while a friend supports the window.  

6.Raise the window up into the door frame. 

7.Use masking tape to secure the window in place. 

Part2 Disconnecting the Motor and Regulator

8.Remove the window regulator bolts.  

9.Locate and remove the window motor mounting bolts.

10.Disconnect the motor wiring harness connector.  

11.Remove the motor and regulator through the access port. 

12. Connect the regulator to the new motor. 

Part3 Installing a New Power Window Motor

13.Slide the new motor and regulator back into place.  

14.Replace the mounting bolts. 

15.Reconnect the electrical connector.   

16.Remove the masking tape and lower the window back down. 

17.Insert the window mounting bolts.   

18.Reinstall the plastic liner and interior panel.